Pins - Dowel - Standard - Rounded Ends - 303-304 Stainless

94 Products in this selection
  • Also known as parallel pins
  • Dowel pins are not used as bearing shafts under normal circumstances, due to their oversized tolerances
  • Precision Dowel Pins - 303/304 Grade Stainless- Based on DIN7
  • Rounded end dowel pins are measured from the start of the edge rounding. This allows the pin to completely fill the hole after you grind off the rounded end.
  • Diameter tolerances are m6 unless otherwise listed
Additional resources:
Dowel Pins Catalogue PDF
Master Pins Catalogue PDF
A more concise listing may be found on the Smallparts store at Pins - Dowel - Standard - Rounded Ends - 303-304 Stainless. Smallparts promote the most popular MBA products.
Diameter (D) Length (L) Approx. Overall Length Type Indicative
Image
Diameter (D)
0.792
mm
+ 0.002 / + 0.008
Length (L)
12.70
mm
+/- 0.350
Approx. Overall Length
13.00
mm
+/- 0.350
Type
3 (Rounded Ends)
Dowel Pins - 0.792x12.7x13 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP007-013-303-3 (500 Pcs) Dowel Pins - 0.792x12.7x13 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D) Length (L) Approx. Overall Length Indicative
Image
Diameter (D)
0.792
mm
+ 0.002 / + 0.008
Length (L)
12.70
mm
+/- 0.350
Approx. Overall Length
13.00
mm
+/- 0.350
Dowel Pins - 0.792x12.7x13 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP007-013-303-3 (500 Pcs) Dowel Pins - 0.792x12.7x13 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
Length (L)
4.00
mm
+/- 0.254
Approx. Overall Length
4.30
mm
+/- 0.254
Type
3 (Rounded Ends)
Dowel Pins - 1 mm x 4 mm x 4.3 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP010-004-303-3 Dowel Pins - 1x4x4.3 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
Length (L)
4.00
mm
+/- 0.254
Approx. Overall Length
4.30
mm
+/- 0.254
Dowel Pins - 1 mm x 4 mm x 4.3 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP010-004-303-3 Dowel Pins - 1x4x4.3 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.46
mm
+/- 0.254
Type
3 (Rounded Ends)
Dowel Pins - 1.5x8x8.46 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP015-008-303-3 (20 Pcs) Dowel Pins - 1.5x8x8.46 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
127 units (2540 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 20
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.46
mm
+/- 0.254
Dowel Pins - 1.5x8x8.46 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP015-008-303-3 (20 Pcs) Dowel Pins - 1.5x8x8.46 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
127 units (2540 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 20
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.30
mm
+/- 0.254
Type
3 (Rounded Ends)
Dowel Pins - 1 mm x 6 mm x 6.3 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP010-006-303-3 Dowel Pins - 1x6x6.3 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.30
mm
+/- 0.254
Dowel Pins - 1 mm x 6 mm x 6.3 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP010-006-303-3 Dowel Pins - 1x6x6.3 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.30
mm
+/- 0.350
Type
3 (Rounded Ends)
Dowel Pins - 1 mm x 12 mm x 12.3 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP010-012-303-3 Dowel Pins - 1x12x12.3 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.30
mm
+/- 0.350
Dowel Pins - 1 mm x 12 mm x 12.3 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP010-012-303-3 Dowel Pins - 1x12x12.3 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
Length (L)
4.00
mm
+/- 0.254
Approx. Overall Length
4.46
mm
+/- 0.254
Type
3 (Rounded Ends)
Dowel Pins - 1.5 mm x 4 mm x 4.46 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP015-006-303-3 Dowel Pins - 1.5x4x4.46 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
Length (L)
4.00
mm
+/- 0.254
Approx. Overall Length
4.46
mm
+/- 0.254
Dowel Pins - 1.5 mm x 4 mm x 4.46 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP015-006-303-3 Dowel Pins - 1.5x4x4.46 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.60
mm
+/ - 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2 mm x 6 mm x 6.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-006-304-3 Dowel Pins - 2x6x6.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.60
mm
+/ - 0.254
Dowel Pins - 2 mm x 6 mm x 6.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-006-304-3 Dowel Pins - 2x6x6.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.60
mm
+/ - 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2x8x8.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-008-304-3 (20 Pcs) Dowel Pins - 2x8x8.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.60
mm
+/ - 0.254
Dowel Pins - 2x8x8.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-008-304-3 (20 Pcs) Dowel Pins - 2x8x8.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
10.00
mm
+/- 0.254
Approx. Overall Length
10.60
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2 mm x 10 mm x 10.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-010-304-3 (2500 Pcs) Dowel Pins - 2x10x10.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Out of Stock | Backorder Now | Orders can be expected around Sat, Jul 05, 2025
$1,386.23 AUD
$1,386.23 AUD
Per 2500
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
10.00
mm
+/- 0.254
Approx. Overall Length
10.60
mm
+/ - 0.350
Dowel Pins - 2 mm x 10 mm x 10.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-010-304-3 (2500 Pcs) Dowel Pins - 2x10x10.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Out of Stock | Backorder Now | Orders can be expected around Sat, Jul 05, 2025
$1,386.23 AUD
$1,386.23 AUD
Per 2500
View the product page first if you are unsure.
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
11.00
mm
+/- 0.350
Approx. Overall Length
11.60
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2x11x11.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-011-304-3 (20 Pcs) Dowel Pins - 2x11x11.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
1 pack (20 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Per 20
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
11.00
mm
+/- 0.350
Approx. Overall Length
11.60
mm
+/ - 0.350
Dowel Pins - 2x11x11.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-011-304-3 (20 Pcs) Dowel Pins - 2x11x11.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
1 pack (20 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Per 20
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.60
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2x12x12.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-012-304-3 (500 Pcs) Dowel Pins - 2x12x12.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.60
mm
+/ - 0.350
Dowel Pins - 2x12x12.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-012-304-3 (500 Pcs) Dowel Pins - 2x12x12.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.60
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2 mm x 14 mm x 14.6 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-014-303-3 (100 Pcs) Dowel Pins - 2x14x14.6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Out of Stock | Backorder Now | Orders can be expected around Sat, May 31, 2025
$19.05 AUD
$19.05 AUD
Per 100
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.60
mm
+/ - 0.350
Dowel Pins - 2 mm x 14 mm x 14.6 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-014-303-3 (100 Pcs) Dowel Pins - 2x14x14.6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Out of Stock | Backorder Now | Orders can be expected around Sat, May 31, 2025
$19.05 AUD
$19.05 AUD
Per 100
View the product page first if you are unsure.
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.60
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2 mm x 16 mm x 16.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-016-304-3 (20 Pcs) Dowel Pins - 2x16x16.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
9 units (180 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 20
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.60
mm
+/ - 0.350
Dowel Pins - 2 mm x 16 mm x 16.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-016-304-3 (20 Pcs) Dowel Pins - 2x16x16.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
9 units (180 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 20
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
20.00
mm
+/- 0.420
Approx. Overall Length
20.60
mm
+/ - 0.420
Type
3 (Rounded Ends)
Dowel Pins - 2x20x20.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-020-304-3 (1000 Pcs) Dowel Pins - 2x20x20.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
20.00
mm
+/- 0.420
Approx. Overall Length
20.60
mm
+/ - 0.420
Dowel Pins - 2x20x20.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-020-304-3 (1000 Pcs) Dowel Pins - 2x20x20.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
4.00
mm
+/- 0.254
Approx. Overall Length
4.60
mm
+/- 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2 mm x 4 mm x 4.6 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-004-303-3 (20 Pcs) Dowel Pins - 2x4x4.6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
7 units (140 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Per 20
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
4.00
mm
+/- 0.254
Approx. Overall Length
4.60
mm
+/- 0.254
Dowel Pins - 2 mm x 4 mm x 4.6 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-004-303-3 (20 Pcs) Dowel Pins - 2x4x4.6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
7 units (140 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Per 20
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
5.00
mm
+/- 0.254
Approx. Overall Length
5.60
mm
+/ - 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2x5x5.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-005-304-3 (100 Pcs) Dowel Pins - 2x5x5.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
65 units (6500 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 100
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
5.00
mm
+/- 0.254
Approx. Overall Length
5.60
mm
+/ - 0.254
Dowel Pins - 2x5x5.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-005-304-3 (100 Pcs) Dowel Pins - 2x5x5.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
65 units (6500 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 100
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
9.00
mm
+/- 0.254
Approx. Overall Length
9.60
mm
+/ - 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2 mm x 9 mm x 9.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-009-304-3 (10 Pcs) Dowel Pins - 2x9x9.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
250 units (2500 pcs) Available Immediately | Further orders can be expected around Sat, Jul 05, 2025
$15.77 AUD
$15.77 AUD
Per 10
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
9.00
mm
+/- 0.254
Approx. Overall Length
9.60
mm
+/ - 0.254
Dowel Pins - 2 mm x 9 mm x 9.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-009-304-3 (10 Pcs) Dowel Pins - 2x9x9.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
250 units (2500 pcs) Available Immediately | Further orders can be expected around Sat, Jul 05, 2025
$15.77 AUD
$15.77 AUD
Per 10
View the product page first if you are unsure.
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
9.00
mm
+/- 0.254
Approx. Overall Length
10.00
mm
+/ - 0.254
Type
3 (Rounded Ends)
1041247 | DP020-009-304-3-L10 (10 Pcs) --- Dowel Pins - 2x9x10 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Notes: Special Oversized Overall Length 10mm. DIN7 is 9.60    Standard: Modified   
Part Number: DP020-009-304-3-L10 (10 Pcs) Dowel Pins - 2x9x10 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
810 units (8100 pcs) Available Immediately | Further orders can be expected around Sat, Jul 05, 2025
$5.32 AUD
$5.32 AUD
Per 10
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
9.00
mm
+/- 0.254
Approx. Overall Length
10.00
mm
+/ - 0.254
1041247 | DP020-009-304-3-L10 (10 Pcs) --- Dowel Pins - 2x9x10 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Notes: Special Oversized Overall Length 10mm. DIN7 is 9.60    Standard: Modified   
Part Number: DP020-009-304-3-L10 (10 Pcs) Dowel Pins - 2x9x10 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
810 units (8100 pcs) Available Immediately | Further orders can be expected around Sat, Jul 05, 2025
$5.32 AUD
$5.32 AUD
Per 10
View the product page first if you are unsure.
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
13.00
mm
+/- 0.350
Approx. Overall Length
13.60
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2x13x13.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-013-304-3 (500 Pcs) Dowel Pins - 2x13x13.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
13.00
mm
+/- 0.350
Approx. Overall Length
13.60
mm
+/ - 0.350
Dowel Pins - 2x13x13.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-013-304-3 (500 Pcs) Dowel Pins - 2x13x13.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.60
mm
+/ - 0.350
Type
3 (Rounded Ends)
Dowel Pins - 2 mm x 14 mm x 14.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-014-304-3 (100 Pcs) Dowel Pins - 2x14x14.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Out of Stock | Backorder Now | Orders can be expected around Sat, May 31, 2025
$19.05 AUD
$19.05 AUD
Per 100
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.60
mm
+/ - 0.350
Dowel Pins - 2 mm x 14 mm x 14.6 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-014-304-3 (100 Pcs) Dowel Pins - 2x14x14.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Out of Stock | Backorder Now | Orders can be expected around Sat, May 31, 2025
$19.05 AUD
$19.05 AUD
Per 100
View the product page first if you are unsure.
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
18.00
mm
+/- 0.420
Approx. Overall Length
18.60
mm
+/ - 0.420
Type
3 (Rounded Ends)
Dowel Pins - 2 mm x 18 mm x 18.6 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-018-303-3 (20 Pcs) Dowel Pins - 2x18x18.6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
10 units (200 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 20
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
18.00
mm
+/- 0.420
Approx. Overall Length
18.60
mm
+/ - 0.420
Dowel Pins - 2 mm x 18 mm x 18.6 mm
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-018-303-3 (20 Pcs) Dowel Pins - 2x18x18.6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
10 units (200 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 20
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
19.00
mm
+/- 0.420
Approx. Overall Length
19.60
mm
+/ - 0.420
Type
3 (Rounded Ends)
Dowel Pins - 2x19x19.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP020-019-304-3 (50 Pcs) Dowel Pins - 2x19x19.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
7 units (350 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Per 50
Diameter (D)
2.000
mm
+ 0.002 / + 0.008
Length (L)
19.00
mm
+/- 0.420
Approx. Overall Length
19.60
mm
+/ - 0.420
Dowel Pins - 2x19x19.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP020-019-304-3 (50 Pcs) Dowel Pins - 2x19x19.6 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
7 units (350 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$7.00 AUD
$13.30 AUD $7.00 AUD
Per 50
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.80
mm
+/ - 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2.5x6x6.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP025-006-304-3 (20 Pcs) Dowel Pins - 2.5x6x6.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
11 units (220 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 20
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.80
mm
+/ - 0.254
Dowel Pins - 2.5x6x6.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP025-006-304-3 (20 Pcs) Dowel Pins - 2.5x6x6.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
11 units (220 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 20
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.80
mm
+/ - 0.254
Type
3 (Rounded Ends)
Dowel Pins - 2.5 mm x 8 mm x 8.8 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Standard: DIN 7   
Part Number: DP025-008-304-3 (5 Pcs) Dowel Pins - 2.5x8x8.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
597 units (2985 pcs) Available Immediately | Further orders can be expected around Sat, Jul 05, 2025
$12.86 AUD
$12.86 AUD
Per 5
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.80
mm
+/ - 0.254
Dowel Pins - 2.5 mm x 8 mm x 8.8 mm
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 3 (Rounded Ends)    Standard: DIN 7   
Part Number: DP025-008-304-3 (5 Pcs) Dowel Pins - 2.5x8x8.8 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
597 units (2985 pcs) Available Immediately | Further orders can be expected around Sat, Jul 05, 2025
$12.86 AUD
$12.86 AUD
Per 5
View the product page first if you are unsure.