Pins - Dowel - Standard - Chamfered Ends

689 Products in this selection
This is a combined category of Chamfered Ends Standard Dowel Pins.
  • Also known as parallel pins
  • Dowel pins are not used as bearing shafts under normal circumstances, due to their oversized tolerances

Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Dowel Pins Catalogue PDF
Master Pins Catalogue PDF
A more concise listing may be found on the Smallparts store at Pins - Dowel - Standard - Chamfered Ends. Smallparts promote the most popular MBA products.
Diameter (D) Length (L) Approx. Overall Length Type Indicative
Image
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.00
mm
+/ - 0.350
Type
1 (Chamfer One End)
1045496 | DP030-014-CH-1 (20 Pcs) --- Dowel Pins - 3x14x14 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-014-CH-1 (20 Pcs) Dowel Pins - 3x14x14 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
19 units (380 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$10.23 AUD
$10.23 AUD
Per 20
Diameter (D) Length (L) Approx. Overall Length Indicative
Image
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.00
mm
+/ - 0.350
1045496 | DP030-014-CH-1 (20 Pcs) --- Dowel Pins - 3x14x14 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-014-CH-1 (20 Pcs) Dowel Pins - 3x14x14 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
19 units (380 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$10.23 AUD
$10.23 AUD
Per 20
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.00
mm
+/ - 0.350
Type
2 (Chamfer Both Ends)
1045497 | DP030-014-303-2 (10 Pcs) --- Dowel Pins - 3x14x14 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-014-303-2 (10 Pcs) Dowel Pins - 3x14x14 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
474 units (4740 pcs) Available Immediately | Further orders can be expected around Thu, Jul 10, 2025
$5.59 AUD
$5.59 AUD
Per 10
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.00
mm
+/ - 0.350
1045497 | DP030-014-303-2 (10 Pcs) --- Dowel Pins - 3x14x14 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-014-303-2 (10 Pcs) Dowel Pins - 3x14x14 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
474 units (4740 pcs) Available Immediately | Further orders can be expected around Thu, Jul 10, 2025
$5.59 AUD
$5.59 AUD
Per 10
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.00
mm
+/ - 0.350
Type
1 (Chamfer One End)
1045599 | DP030-016-CH-1 (20 Pcs) --- Dowel Pins - 3x16x16 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-016-CH-1 (20 Pcs) Dowel Pins - 3x16x16 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
35 units (700 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$9.59 AUD
$9.59 AUD
Per 20
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.00
mm
+/ - 0.350
1045599 | DP030-016-CH-1 (20 Pcs) --- Dowel Pins - 3x16x16 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-016-CH-1 (20 Pcs) Dowel Pins - 3x16x16 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
35 units (700 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$9.59 AUD
$9.59 AUD
Per 20
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
18.00
mm
+/- 0.420
Approx. Overall Length
18.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
Dowel Pins - 3x18x18 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-018-304-1 (500 Pcs) Dowel Pins - 3x18x18 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
18.00
mm
+/- 0.420
Approx. Overall Length
18.00
mm
+/ - 0.420
Dowel Pins - 3x18x18 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 304 (Similar to A2, 18-8) HRB80    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-018-304-1 (500 Pcs) Dowel Pins - 3x18x18 mm - Stainless Steel 304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
18.00
mm
+/- 0.420
Approx. Overall Length
18.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
1045682 | DP030-018-CH-1 (100 Pcs) --- Dowel Pins - 3x18x18 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-018-CH-1 (100 Pcs) Dowel Pins - 3x18x18 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$49.77 AUD
$49.77 AUD
Per 100
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
18.00
mm
+/- 0.420
Approx. Overall Length
18.00
mm
+/ - 0.420
1045682 | DP030-018-CH-1 (100 Pcs) --- Dowel Pins - 3x18x18 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-018-CH-1 (100 Pcs) Dowel Pins - 3x18x18 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$49.77 AUD
$49.77 AUD
Per 100
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
20.00
mm
+/- 0.420
Approx. Overall Length
20.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
1045747 | DP030-020-CH-1 (20 Pcs) --- Dowel Pins - 3x20x20 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-020-CH-1 (20 Pcs) Dowel Pins - 3x20x20 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
59 units (1180 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$7.95 AUD
$7.95 AUD
Per 20
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
20.00
mm
+/- 0.420
Approx. Overall Length
20.00
mm
+/ - 0.420
1045747 | DP030-020-CH-1 (20 Pcs) --- Dowel Pins - 3x20x20 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-020-CH-1 (20 Pcs) Dowel Pins - 3x20x20 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
59 units (1180 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$7.95 AUD
$7.95 AUD
Per 20
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.03 / - 0.00
Length (L)
20.00
mm
Approx. Overall Length
20.00
mm
Type
1 (Chamfer One End)
1045748 | DP030-020-PC-1 --- Dowel Pins - 3x20x20 mm - Polycarbonate
Material: Polycarbonate   
Category: Pins - Dowel - Standard - Chamfered Ends - Plastic
Part Number: DP030-020-PC-1 Dowel Pins - 3x20x20 mm - Polycarbonate
Out of Stock | Backorder Now | Orders can be expected around Sat, Jun 14, 2025
$35.86 AUD
$35.86 AUD
Each
Diameter (D)
3.000
mm
+ 0.03 / - 0.00
Length (L)
20.00
mm
Approx. Overall Length
20.00
mm
1045748 | DP030-020-PC-1 --- Dowel Pins - 3x20x20 mm - Polycarbonate
Material: Polycarbonate    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Plastic
Part Number: DP030-020-PC-1 Dowel Pins - 3x20x20 mm - Polycarbonate
Out of Stock | Backorder Now | Orders can be expected around Sat, Jun 14, 2025
$35.86 AUD
$35.86 AUD
Each
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
4.00
mm
+/- 0.254
Approx. Overall Length
4.00
mm
+/ - 0.254
Type
2 (Chamfer Both Ends)
Dowel Pins - 3x4x4 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-004-303-2 (500 Pcs) Dowel Pins - 3x4x4 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
4.00
mm
+/- 0.254
Approx. Overall Length
4.00
mm
+/ - 0.254
Dowel Pins - 3x4x4 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-004-303-2 (500 Pcs) Dowel Pins - 3x4x4 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
1045869 | DP030-024-CH-1 (5 Pcs) --- Dowel Pins - 3x24x24 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-024-CH-1 (5 Pcs) Dowel Pins - 3x24x24 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
208 units (1040 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$5.32 AUD
$5.32 AUD
Per 5
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.00
mm
+/ - 0.420
1045869 | DP030-024-CH-1 (5 Pcs) --- Dowel Pins - 3x24x24 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-024-CH-1 (5 Pcs) Dowel Pins - 3x24x24 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
208 units (1040 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$5.32 AUD
$5.32 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.00
mm
+/ - 0.420
Type
2 (Chamfer Both Ends)
Dowel Pins - 3x24x24 mm - Stainless Steel 316 (Similar to A4, 18-10)
Material: Stainless Steel 316 (Similar to A4, 18-10)   
Category: Pins - Dowel - Standard - Chamfered Ends - 316 Stainless
Part Number: DP030-024-316-2 (20 Pcs) Dowel Pins - 3x24x24 mm - Stainless Steel 316 Similar to A4, 18-10
270 units (5400 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 20
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.00
mm
+/ - 0.420
Dowel Pins - 3x24x24 mm - Stainless Steel 316 (Similar to A4, 18-10)
Material: Stainless Steel 316 (Similar to A4, 18-10)    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 316 Stainless
Part Number: DP030-024-316-2 (20 Pcs) Dowel Pins - 3x24x24 mm - Stainless Steel 316 Similar to A4, 18-10
270 units (5400 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 20
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
25.00
mm
+/- 0.420
Approx. Overall Length
25.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
1045910 | DP030-025-CH-1 (20 Pcs) --- Dowel Pins - 3x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-025-CH-1 (20 Pcs) Dowel Pins - 3x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
25 units (500 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$8.14 AUD
$9.76 AUD $8.14 AUD
Per 20
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
25.00
mm
+/- 0.420
Approx. Overall Length
25.00
mm
+/ - 0.420
1045910 | DP030-025-CH-1 (20 Pcs) --- Dowel Pins - 3x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-025-CH-1 (20 Pcs) Dowel Pins - 3x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
25 units (500 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$8.14 AUD
$9.76 AUD $8.14 AUD
Per 20
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
5.00
mm
+/- 0.254
Approx. Overall Length
5.00
mm
+/ - 0.254
Type
2 (Chamfer Both Ends)
Dowel Pins - 3x5x5 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-005-303-2 (100 Pcs) Dowel Pins - 3x5x5 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
2 units (200 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 100
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
5.00
mm
+/- 0.254
Approx. Overall Length
5.00
mm
+/ - 0.254
Dowel Pins - 3x5x5 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-005-303-2 (100 Pcs) Dowel Pins - 3x5x5 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
2 units (200 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 100
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
30.00
mm
+/- 0.500
Approx. Overall Length
30.00
mm
+/ - 0.500
Type
1 (Chamfer One End)
1046090 | DP030-030-CH-1 (20 Pcs) --- Dowel Pins - 3x30x30 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-030-CH-1 (20 Pcs) Dowel Pins - 3x30x30 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
15 units (300 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Per 20
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
30.00
mm
+/- 0.500
Approx. Overall Length
30.00
mm
+/ - 0.500
1046090 | DP030-030-CH-1 (20 Pcs) --- Dowel Pins - 3x30x30 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-030-CH-1 (20 Pcs) Dowel Pins - 3x30x30 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
15 units (300 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Per 20
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
30.00
mm
+/- 0.500
Approx. Overall Length
30.00
mm
+/ - 0.500
Type
2 (Chamfer Both Ends)
1046091 | DP030-030-303-2 (50 Pcs) --- Dowel Pins - 3x30x30 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-030-303-2 (50 Pcs) Dowel Pins - 3x30x30 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
30.00
mm
+/- 0.500
Approx. Overall Length
30.00
mm
+/ - 0.500
1046091 | DP030-030-303-2 (50 Pcs) --- Dowel Pins - 3x30x30 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-030-303-2 (50 Pcs) Dowel Pins - 3x30x30 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
32.00
mm
+/- 0.500
Approx. Overall Length
32.00
mm
+/ - 0.500
Type
1 (Chamfer One End)
1046146 | DP030-032-CH-1 (50 Pcs) --- Dowel Pins - 3x32x32 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-032-CH-1 (50 Pcs) Dowel Pins - 3x32x32 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$54.95 AUD
$54.95 AUD
Per 50
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
32.00
mm
+/- 0.500
Approx. Overall Length
32.00
mm
+/ - 0.500
1046146 | DP030-032-CH-1 (50 Pcs) --- Dowel Pins - 3x32x32 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-032-CH-1 (50 Pcs) Dowel Pins - 3x32x32 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Thu, Jun 05, 2025
$54.95 AUD
$54.95 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
40.00
mm
+/- 0.500
Approx. Overall Length
40.00
mm
+/ - 0.500
Type
1 (Chamfer One End)
1046235 | DP030-040-CH-1 (10 Pcs) --- Dowel Pins - 3x40x40 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-040-CH-1 (10 Pcs) Dowel Pins - 3x40x40 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
94 units (940 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$11.23 AUD
$11.23 AUD
Per 10
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
40.00
mm
+/- 0.500
Approx. Overall Length
40.00
mm
+/ - 0.500
1046235 | DP030-040-CH-1 (10 Pcs) --- Dowel Pins - 3x40x40 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-040-CH-1 (10 Pcs) Dowel Pins - 3x40x40 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
94 units (940 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$11.23 AUD
$11.23 AUD
Per 10
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.00
mm
+/ - 0.254
Type
2 (Chamfer Both Ends)
Dowel Pins - 3x6x6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-006-303-2 (50 Pcs) Dowel Pins - 3x6x6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
52 units (2600 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.00 AUD
$7.60 AUD $4.00 AUD
Per 50
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.00
mm
+/ - 0.254
Dowel Pins - 3x6x6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-006-303-2 (50 Pcs) Dowel Pins - 3x6x6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
52 units (2600 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.00 AUD
$7.60 AUD $4.00 AUD
Per 50
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
50.00
mm
+/- 0.600
Approx. Overall Length
50.00
mm
+/ - 0.600
Type
1 (Chamfer One End)
1046322 | DP030-050-CH-1 (10 Pcs) --- Dowel Pins - 3x50x50 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-050-CH-1 (10 Pcs) Dowel Pins - 3x50x50 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
10 units (100 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$8.32 AUD
$8.32 AUD
Per 10
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
50.00
mm
+/- 0.600
Approx. Overall Length
50.00
mm
+/ - 0.600
1046322 | DP030-050-CH-1 (10 Pcs) --- Dowel Pins - 3x50x50 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-050-CH-1 (10 Pcs) Dowel Pins - 3x50x50 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
10 units (100 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$8.32 AUD
$8.32 AUD
Per 10
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
55.00
mm
+/- 0.600
Approx. Overall Length
55.00
mm
+/ - 0.600
Type
1 (Chamfer One End)
1046345 | DP030-055-CH-1 --- Dowel Pins - 3x55x55 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-055-CH-1 Dowel Pins - 3x55x55 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
55.00
mm
+/- 0.600
Approx. Overall Length
55.00
mm
+/ - 0.600
1046345 | DP030-055-CH-1 --- Dowel Pins - 3x55x55 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-055-CH-1 Dowel Pins - 3x55x55 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.00
mm
+/ - 0.254
Type
1 (Chamfer One End)
1046651 | DP030-008-CH-1 (50 Pcs) --- Dowel Pins - 3x8x8 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-008-CH-1 (50 Pcs) Dowel Pins - 3x8x8 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
51 units (2550 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$11.95 AUD
$11.95 AUD
Per 50
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.00
mm
+/ - 0.254
1046651 | DP030-008-CH-1 (50 Pcs) --- Dowel Pins - 3x8x8 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-008-CH-1 (50 Pcs) Dowel Pins - 3x8x8 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
51 units (2550 pcs) Available Immediately | Further orders can be expected around Thu, Jun 05, 2025
$11.95 AUD
$11.95 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.00
mm
+/ - 0.254
Type
2 (Chamfer Both Ends)
1046652 | DP030-008-416-2 --- Dowel Pins - 3x8x8 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Part Number: DP030-008-416-2 Dowel Pins - 3x8x8 mm - Stainless Steel AISI 416 Rc 36-42
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.00
mm
+/ - 0.254
1046652 | DP030-008-416-2 --- Dowel Pins - 3x8x8 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Part Number: DP030-008-416-2 Dowel Pins - 3x8x8 mm - Stainless Steel AISI 416 Rc 36-42
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.00
mm
+/ - 0.254
Type
2 (Chamfer Both Ends)
Dowel Pins - 3x8x8 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-008-303-2 (500 Pcs) Dowel Pins - 3x8x8 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.00
mm
+/ - 0.254
Dowel Pins - 3x8x8 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-008-303-2 (500 Pcs) Dowel Pins - 3x8x8 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
10.00
mm
+/- 0.350
Approx. Overall Length
10.00
mm
+/ - 0.350
Type
2 (Chamfer Both Ends)
1046957 | DP030-010-303-2 (10 Pcs) --- Dowel Pins - 3x10x10 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-010-303-2 (10 Pcs) Dowel Pins - 3x10x10 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
256 units (2560 pcs) Available Immediately | Further orders can be expected around Thu, Jul 10, 2025
$6.05 AUD
$6.05 AUD
Per 10
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
10.00
mm
+/- 0.350
Approx. Overall Length
10.00
mm
+/ - 0.350
1046957 | DP030-010-303-2 (10 Pcs) --- Dowel Pins - 3x10x10 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP030-010-303-2 (10 Pcs) Dowel Pins - 3x10x10 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
256 units (2560 pcs) Available Immediately | Further orders can be expected around Thu, Jul 10, 2025
$6.05 AUD
$6.05 AUD
Per 10
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
10.00
mm
+/- 0.350
Approx. Overall Length
10.00
mm
+/ - 0.350
Type
2 (Chamfer Both Ends)
1046957 | DP030-010-416-2 --- Dowel Pins - 3x10x10 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42   
Category: Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Part Number: DP030-010-416-2 Dowel Pins - 3x10x10 mm - Stainless Steel AISI 416 Rc 36-42
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
10.00
mm
+/- 0.350
Approx. Overall Length
10.00
mm
+/ - 0.350
1046957 | DP030-010-416-2 --- Dowel Pins - 3x10x10 mm - Stainless Steel AISI 416 Rc 36-42
Material: Stainless Steel AISI 416 Rc 36-42    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Part Number: DP030-010-416-2 Dowel Pins - 3x10x10 mm - Stainless Steel AISI 416 Rc 36-42
Contact Us | Item Discontinued - Please contact us if you need a large quantity