Pins - Dowel - Standard - Chamfered Ends

689 Products in this selection
This is a combined category of Chamfered Ends Standard Dowel Pins.
  • Also known as parallel pins
  • Dowel pins are not used as bearing shafts under normal circumstances, due to their oversized tolerances

Use the filters in the table below, or the category tree above to refine the selection. To order any item, simply click the part number for a full product page, then add to your cart.
Additional resources:
Dowel Pins Catalogue PDF
Master Pins Catalogue PDF
A more concise listing may be found on the Smallparts store at Pins - Dowel - Standard - Chamfered Ends. Smallparts promote the most popular MBA products.
Diameter (D) Length (L) Approx. Overall Length Type Indicative
Image
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
30.00
mm
+/- 0.500
Approx. Overall Length
30.00
mm
+/ - 0.500
Type
1 (Chamfer One End)
1042425 | DP025-030-CH-1 (20 Pcs) --- Dowel Pins - 2.5x30x30 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP025-030-CH-1 (20 Pcs) Dowel Pins - 2.5x30x30 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
14 units (280 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Per 20
Diameter (D) Length (L) Approx. Overall Length Indicative
Image
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
30.00
mm
+/- 0.500
Approx. Overall Length
30.00
mm
+/ - 0.500
1042425 | DP025-030-CH-1 (20 Pcs) --- Dowel Pins - 2.5x30x30 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP025-030-CH-1 (20 Pcs) Dowel Pins - 2.5x30x30 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
14 units (280 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Per 20
Diameter (D)
2.381
mm
+ 0.002 / + 0.008
Length (L)
6.35
mm
+/- 0.254
Approx. Overall Length
6.35
mm
+/ - 0.254
Type
1 (Chamfer One End)
1043121 | DP024-006-CH-1 (50 Pcs) --- Dowel Pins - 2.381x6.35x6.35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-006-CH-1 (50 Pcs) Dowel Pins - 2.381x6.35x6.35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 08, 2025
$49.41 AUD
$49.41 AUD
Per 50
Diameter (D)
2.381
mm
+ 0.002 / + 0.008
Length (L)
6.35
mm
+/- 0.254
Approx. Overall Length
6.35
mm
+/ - 0.254
1043121 | DP024-006-CH-1 (50 Pcs) --- Dowel Pins - 2.381x6.35x6.35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-006-CH-1 (50 Pcs) Dowel Pins - 2.381x6.35x6.35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 08, 2025
$49.41 AUD
$49.41 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
2.381
mm
+ 0.002 / + 0.008
Length (L)
7.94
mm
+/- 0.254
Approx. Overall Length
7.94
mm
+/ - 0.254
Type
1 (Chamfer One End)
1043243 | DP024-008-CH-1 (50 Pcs) --- Dowel Pins - 2.381x7.94x7.94 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-008-CH-1 (50 Pcs) Dowel Pins - 2.381x7.94x7.94 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 08, 2025
$49.41 AUD
$49.41 AUD
Per 50
Diameter (D)
2.381
mm
+ 0.002 / + 0.008
Length (L)
7.94
mm
+/- 0.254
Approx. Overall Length
7.94
mm
+/ - 0.254
1043243 | DP024-008-CH-1 (50 Pcs) --- Dowel Pins - 2.381x7.94x7.94 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-008-CH-1 (50 Pcs) Dowel Pins - 2.381x7.94x7.94 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 08, 2025
$49.41 AUD
$49.41 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
2.381
mm
+ 0.002 / + 0.008
Length (L)
11.11
mm
+/- 0.350
Approx. Overall Length
11.11
mm
+/ - 0.350
Type
1 (Chamfer One End)
1043251 | DP024-011-CH-1 (50 Pcs) --- Dowel Pins - 2.381x11.11x11.11 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-011-CH-1 (50 Pcs) Dowel Pins - 2.381x11.11x11.11 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Wed, Jun 04, 2025
$31.86 AUD
$31.86 AUD
Per 50
Diameter (D)
2.381
mm
+ 0.002 / + 0.008
Length (L)
11.11
mm
+/- 0.350
Approx. Overall Length
11.11
mm
+/ - 0.350
1043251 | DP024-011-CH-1 (50 Pcs) --- Dowel Pins - 2.381x11.11x11.11 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-011-CH-1 (50 Pcs) Dowel Pins - 2.381x11.11x11.11 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Wed, Jun 04, 2025
$31.86 AUD
$31.86 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
2.381
mm
+ 0.002 / + 0.008
Length (L)
19.05
mm
+/- 0.420
Approx. Overall Length
19.05
mm
+/ - 0.420
Type
1 (Chamfer One End)
1043266 | DP024-019-CH-1 (5 Pcs) --- Dowel Pins - 2.381x19.05x19.05 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-019-CH-1 (5 Pcs) Dowel Pins - 2.381x19.05x19.05 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
1 pack (5 pcs) Available Immediately | Further orders can be expected around Tue, Jul 08, 2025
$7.32 AUD
$7.32 AUD
Per 5
Diameter (D)
2.381
mm
+ 0.002 / + 0.008
Length (L)
19.05
mm
+/- 0.420
Approx. Overall Length
19.05
mm
+/ - 0.420
1043266 | DP024-019-CH-1 (5 Pcs) --- Dowel Pins - 2.381x19.05x19.05 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-019-CH-1 (5 Pcs) Dowel Pins - 2.381x19.05x19.05 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
1 pack (5 pcs) Available Immediately | Further orders can be expected around Tue, Jul 08, 2025
$7.32 AUD
$7.32 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
2.381
mm
+ 0.002 / + 0.008
Length (L)
22.23
mm
+/- 0.420
Approx. Overall Length
22.23
mm
+/ - 0.420
Type
1 (Chamfer One End)
1043269 | DP024-022-CH-1 (2 Pcs) --- Dowel Pins - 2.381x22.23x22.23 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-022-CH-1 (2 Pcs) Dowel Pins - 2.381x22.23x22.23 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
48 units (96 pcs) Available Immediately | Further orders can be expected around Tue, Jul 08, 2025
$4.59 AUD
$4.59 AUD
Per 2
Diameter (D)
2.381
mm
+ 0.002 / + 0.008
Length (L)
22.23
mm
+/- 0.420
Approx. Overall Length
22.23
mm
+/ - 0.420
1043269 | DP024-022-CH-1 (2 Pcs) --- Dowel Pins - 2.381x22.23x22.23 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-022-CH-1 (2 Pcs) Dowel Pins - 2.381x22.23x22.23 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
48 units (96 pcs) Available Immediately | Further orders can be expected around Tue, Jul 08, 2025
$4.59 AUD
$4.59 AUD
Per 2
View the product page first if you are unsure.
Diameter (D)
2.407
mm
+ 0.002 / + 0.008
Length (L)
12.70
mm
+/- 0.350
Approx. Overall Length
12.70
mm
+/ - 0.350
Type
1 (Chamfer One End)
1043381 | DP024-013-CH-1A (44 Pcs) --- Dowel Pins - 2.407x12.7x12.7 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-013-CH-1A (44 Pcs) Dowel Pins - 2.407x12.7x12.7 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Wed, Jun 04, 2025
$19.68 AUD
$19.68 AUD
Per 44
Diameter (D)
2.407
mm
+ 0.002 / + 0.008
Length (L)
12.70
mm
+/- 0.350
Approx. Overall Length
12.70
mm
+/ - 0.350
1043381 | DP024-013-CH-1A (44 Pcs) --- Dowel Pins - 2.407x12.7x12.7 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP024-013-CH-1A (44 Pcs) Dowel Pins - 2.407x12.7x12.7 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Wed, Jun 04, 2025
$19.68 AUD
$19.68 AUD
Per 44
View the product page first if you are unsure.
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
4.00
mm
+/- 0.254
Approx. Overall Length
4.00
mm
+/ - 0.254
Type
2 (Chamfer Both Ends)
Dowel Pins - 2.5x4x4 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-004-303-2 (500 Pcs) Dowel Pins - 2.5x4x4 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
4.00
mm
+/- 0.254
Approx. Overall Length
4.00
mm
+/ - 0.254
Dowel Pins - 2.5x4x4 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-004-303-2 (500 Pcs) Dowel Pins - 2.5x4x4 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
5.00
mm
+/- 0.254
Approx. Overall Length
5.00
mm
+/ - 0.254
Type
2 (Chamfer Both Ends)
Dowel Pins - 2.5x5x5 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-005-303-2 (500 Pcs) Dowel Pins - 2.5x5x5 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
5.00
mm
+/- 0.254
Approx. Overall Length
5.00
mm
+/ - 0.254
Dowel Pins - 2.5x5x5 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-005-303-2 (500 Pcs) Dowel Pins - 2.5x5x5 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.00
mm
+/ - 0.254
Type
2 (Chamfer Both Ends)
Dowel Pins - 2.5x6x6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-006-303-2 (500 Pcs) Dowel Pins - 2.5x6x6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.00
mm
+/ - 0.254
Dowel Pins - 2.5x6x6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-006-303-2 (500 Pcs) Dowel Pins - 2.5x6x6 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.00
mm
+/ - 0.254
Type
2 (Chamfer Both Ends)
1043775 | DP025-008-303-2 --- Dowel Pins - 2.5x8x8 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-008-303-2 Dowel Pins - 2.5x8x8 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
8.00
mm
+/- 0.254
Approx. Overall Length
8.00
mm
+/ - 0.254
1043775 | DP025-008-303-2 --- Dowel Pins - 2.5x8x8 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-008-303-2 Dowel Pins - 2.5x8x8 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
10.00
mm
+/- 0.350
Approx. Overall Length
10.00
mm
+/ - 0.350
Type
2 (Chamfer Both Ends)
Dowel Pins - 2.5x10x10 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-010-303-2 (500 Pcs) Dowel Pins - 2.5x10x10 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
10.00
mm
+/- 0.350
Approx. Overall Length
10.00
mm
+/ - 0.350
Dowel Pins - 2.5x10x10 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-010-303-2 (500 Pcs) Dowel Pins - 2.5x10x10 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.00
mm
+/ - 0.350
Type
2 (Chamfer Both Ends)
Dowel Pins - 2.5x12x12 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-012-303-2 (500 Pcs) Dowel Pins - 2.5x12x12 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.00
mm
+/ - 0.350
Dowel Pins - 2.5x12x12 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-012-303-2 (500 Pcs) Dowel Pins - 2.5x12x12 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.00
mm
+/ - 0.350
Type
2 (Chamfer Both Ends)
Dowel Pins - 2.5x14x14 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-014-303-2 (500 Pcs) Dowel Pins - 2.5x14x14 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
14.00
mm
+/- 0.350
Approx. Overall Length
14.00
mm
+/ - 0.350
Dowel Pins - 2.5x14x14 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-014-303-2 (500 Pcs) Dowel Pins - 2.5x14x14 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.00
mm
+/ - 0.350
Type
2 (Chamfer Both Ends)
Dowel Pins - 2.5x16x16 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-016-303-2 (50 Pcs) Dowel Pins - 2.5x16x16 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
7 units (350 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.00 AUD
$7.60 AUD $4.00 AUD
Per 50
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
16.00
mm
+/- 0.350
Approx. Overall Length
16.00
mm
+/ - 0.350
Dowel Pins - 2.5x16x16 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-016-303-2 (50 Pcs) Dowel Pins - 2.5x16x16 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
7 units (350 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$4.00 AUD
$7.60 AUD $4.00 AUD
Per 50
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
18.00
mm
+/- 0.420
Approx. Overall Length
18.00
mm
+/ - 0.420
Type
2 (Chamfer Both Ends)
Dowel Pins - 2.5x18x18 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-018-303-2 (500 Pcs) Dowel Pins - 2.5x18x18 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
18.00
mm
+/- 0.420
Approx. Overall Length
18.00
mm
+/ - 0.420
Dowel Pins - 2.5x18x18 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-018-303-2 (500 Pcs) Dowel Pins - 2.5x18x18 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
20.00
mm
+/- 0.420
Approx. Overall Length
20.00
mm
+/ - 0.420
Type
2 (Chamfer Both Ends)
Dowel Pins - 2.5x20x20 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-020-303-2 (500 Pcs) Dowel Pins - 2.5x20x20 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
20.00
mm
+/- 0.420
Approx. Overall Length
20.00
mm
+/ - 0.420
Dowel Pins - 2.5x20x20 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-020-303-2 (500 Pcs) Dowel Pins - 2.5x20x20 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.00
mm
+/ - 0.420
Type
2 (Chamfer Both Ends)
1044131 | DP025-024-303-2 (5 Pcs) --- Dowel Pins - 2.5x24x24 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-024-303-2 (5 Pcs) Dowel Pins - 2.5x24x24 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
376 units (1880 pcs) Available Immediately | Further orders can be expected around Wed, Jul 09, 2025
$5.14 AUD
$5.14 AUD
Per 5
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
24.00
mm
+/- 0.420
Approx. Overall Length
24.00
mm
+/ - 0.420
1044131 | DP025-024-303-2 (5 Pcs) --- Dowel Pins - 2.5x24x24 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
Material: Stainless Steel 303/304 (Similar to A2, 18-8) HRB80    Type: 2 (Chamfer Both Ends)   
Category: Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Part Number: DP025-024-303-2 (5 Pcs) Dowel Pins - 2.5x24x24 mm - Stainless Steel 303/304 (Similar to A2, 18-8) HRB80
376 units (1880 pcs) Available Immediately | Further orders can be expected around Wed, Jul 09, 2025
$5.14 AUD
$5.14 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
25.00
mm
+/- 0.420
Approx. Overall Length
25.00
mm
+/ - 0.420
Type
1 (Chamfer One End)
1044139 | DP025-025-CH-1 (50 Pcs) --- Dowel Pins - 2.5x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP025-025-CH-1 (50 Pcs) Dowel Pins - 2.5x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 08, 2025
$138.50 AUD
$138.50 AUD
Per 50
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
25.00
mm
+/- 0.420
Approx. Overall Length
25.00
mm
+/ - 0.420
1044139 | DP025-025-CH-1 (50 Pcs) --- Dowel Pins - 2.5x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP025-025-CH-1 (50 Pcs) Dowel Pins - 2.5x25x25 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 08, 2025
$138.50 AUD
$138.50 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
45.00
mm
+/- 0.500
Approx. Overall Length
45.00
mm
+/ - 0.500
Type
1 (Chamfer One End)
1044232 | DP025-045-CH-1 --- Dowel Pins - 2.5x45x45 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP025-045-CH-1 Dowel Pins - 2.5x45x45 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
2.500
mm
+ 0.002 / + 0.008
Length (L)
45.00
mm
+/- 0.500
Approx. Overall Length
45.00
mm
+/ - 0.500
1044232 | DP025-045-CH-1 --- Dowel Pins - 2.5x45x45 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP025-045-CH-1 Dowel Pins - 2.5x45x45 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.00
mm
+/ - 0.254
Type
1 (Chamfer One End)
1044473 | DP030-006-CH-1 (50 Pcs) --- Dowel Pins - 3x6x6 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-006-CH-1 (50 Pcs) Dowel Pins - 3x6x6 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
11 units (550 pcs) Available Immediately | Further orders can be expected around Wed, Jun 04, 2025
$10.41 AUD
$10.41 AUD
Per 50
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
6.00
mm
+/- 0.254
Approx. Overall Length
6.00
mm
+/ - 0.254
1044473 | DP030-006-CH-1 (50 Pcs) --- Dowel Pins - 3x6x6 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-006-CH-1 (50 Pcs) Dowel Pins - 3x6x6 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
11 units (550 pcs) Available Immediately | Further orders can be expected around Wed, Jun 04, 2025
$10.41 AUD
$10.41 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
10.00
mm
+/- 0.350
Approx. Overall Length
10.00
mm
+/ - 0.350
Type
1 (Chamfer One End)
1045188 | DP030-010-CH-1 (20 Pcs) --- Dowel Pins - 3x10x10 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-010-CH-1 (20 Pcs) Dowel Pins - 3x10x10 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
15 units (300 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.00 AUD
$5.70 AUD $3.00 AUD
Per 20
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
10.00
mm
+/- 0.350
Approx. Overall Length
10.00
mm
+/ - 0.350
1045188 | DP030-010-CH-1 (20 Pcs) --- Dowel Pins - 3x10x10 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-010-CH-1 (20 Pcs) Dowel Pins - 3x10x10 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
15 units (300 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$3.00 AUD
$5.70 AUD $3.00 AUD
Per 20
Diameter (D)
3.000
mm
+ 0.03 / - 0.00
Length (L)
10.00
mm
Approx. Overall Length
10.00
mm
Type
1 (Chamfer One End)
1045189 | DP030-010-PC-1 --- Dowel Pins - 3x10x10 mm - Polycarbonate
Material: Polycarbonate   
Category: Pins - Dowel - Standard - Chamfered Ends - Plastic
Part Number: DP030-010-PC-1 Dowel Pins - 3x10x10 mm - Polycarbonate
Out of Stock | Backorder Now | Orders can be expected around Fri, Jun 13, 2025
$33.05 AUD
$33.05 AUD
Each
Diameter (D)
3.000
mm
+ 0.03 / - 0.00
Length (L)
10.00
mm
Approx. Overall Length
10.00
mm
1045189 | DP030-010-PC-1 --- Dowel Pins - 3x10x10 mm - Polycarbonate
Material: Polycarbonate    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Plastic
Part Number: DP030-010-PC-1 Dowel Pins - 3x10x10 mm - Polycarbonate
Out of Stock | Backorder Now | Orders can be expected around Fri, Jun 13, 2025
$33.05 AUD
$33.05 AUD
Each
View the product page first if you are unsure.
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.00
mm
+/ - 0.350
Type
1 (Chamfer One End)
1045350 | DP030-012-CH-1 (50 Pcs) --- Dowel Pins - 3x12x12 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-012-CH-1 (50 Pcs) Dowel Pins - 3x12x12 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
14 units (700 pcs) Available Immediately | Further orders can be expected around Wed, Jun 04, 2025
$12.32 AUD
$12.32 AUD
Per 50
Diameter (D)
3.000
mm
+ 0.004 / + 0.012
Length (L)
12.00
mm
+/- 0.350
Approx. Overall Length
12.00
mm
+/ - 0.350
1045350 | DP030-012-CH-1 (50 Pcs) --- Dowel Pins - 3x12x12 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
Material: Steel 100Cr6 - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)   
Category: Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Part Number: DP030-012-CH-1 (50 Pcs) Dowel Pins - 3x12x12 mm - Steel 100Cr6 - Heat Treated and Ground Rc 58-62
14 units (700 pcs) Available Immediately | Further orders can be expected around Wed, Jun 04, 2025
$12.32 AUD
$12.32 AUD
Per 50
View the product page first if you are unsure.