Pins - Dowel - Standard - Chamfered Ends - Carbon Steel

383 Products in this selection
  • Also known as parallel pins
  • Dowel pins are not used as bearing shafts under normal circumstances, due to their oversized tolerances
  • Precision Dowel Pins - Based on DIN6325, ISO2338
  • Note! Type 2 pins may be supplied in lieu of type 1 pins.
Miniature Bearings Australia (Minibearings)

Additional resources:
Dowel Pins Catalogue PDF
Master Pins Catalogue PDF
A more concise listing may be found on the Smallparts store at Pins - Dowel - Standard - Chamfered Ends - Carbon Steel. Smallparts promote the most popular MBA products.
Diameter (D) Length (L) Approx. Overall Length Type Indicative
Image
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
4.00
mm
+/- 0.254
(0.157 in.)
Approx. Overall Length
4.00
mm
+/- 0.254
(0.157 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1x4x4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP010-004-CH-1 (50 Pcs) Dowel Pins - 1x4x4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
3 units (150 pcs) Available Immediately | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 50
Diameter (D) Length (L) Approx. Overall Length Indicative
Image
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
4.00
mm
+/- 0.254
(0.157 in.)
Approx. Overall Length
4.00
mm
+/- 0.254
(0.157 in.)
Dowel Pins - 1x4x4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP010-004-CH-1 (50 Pcs) Dowel Pins - 1x4x4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
3 units (150 pcs) Available Immediately | Item Discontinued - Up to 3 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 50
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
5.00
mm
+/- 0.254
(0.197 in.)
Approx. Overall Length
5.00
mm
+/- 0.254
(0.197 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1x5x5 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP010-005-CH-1 Dowel Pins - 1x5x5 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
5.00
mm
+/- 0.254
(0.197 in.)
Approx. Overall Length
5.00
mm
+/- 0.254
(0.197 in.)
Dowel Pins - 1x5x5 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP010-005-CH-1 Dowel Pins - 1x5x5 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
6.00
mm
+/- 0.254
(0.236 in.)
Approx. Overall Length
6.00
mm
+/- 0.254
(0.236 in.)
Type
1 (Chamfer One End)
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP010-006-CH-1 (30 Pcs) Dowel Pins - 1x6x6 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
6.00
mm
+/- 0.254
(0.236 in.)
Approx. Overall Length
6.00
mm
+/- 0.254
(0.236 in.)
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP010-006-CH-1 (30 Pcs) Dowel Pins - 1x6x6 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
8.00
mm
+/- 0.254
(0.315 in.)
Approx. Overall Length
8.00
mm
+/- 0.254
(0.315 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1x8x8 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP010-008-CH-1 Dowel Pins - 1x8x8 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
8.00
mm
+/- 0.254
(0.315 in.)
Approx. Overall Length
8.00
mm
+/- 0.254
(0.315 in.)
Dowel Pins - 1x8x8 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP010-008-CH-1 Dowel Pins - 1x8x8 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
10.00
mm
+/- 0.350
(0.394 in.)
Approx. Overall Length
10.00
mm
+/- 0.350
(0.394 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1x10x10 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP010-010-CH-1 Dowel Pins - 1x10x10 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
10.00
mm
+/- 0.350
(0.394 in.)
Approx. Overall Length
10.00
mm
+/- 0.350
(0.394 in.)
Dowel Pins - 1x10x10 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP010-010-CH-1 Dowel Pins - 1x10x10 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
12.00
mm
+/- 0.350
(0.472 in.)
Approx. Overall Length
12.00
mm
+/- 0.350
(0.472 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1x12x12 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP010-012-CH-1 Dowel Pins - 1x12x12 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
12.00
mm
+/- 0.350
(0.472 in.)
Approx. Overall Length
12.00
mm
+/- 0.350
(0.472 in.)
Dowel Pins - 1x12x12 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP010-012-CH-1 Dowel Pins - 1x12x12 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
16.00
mm
+/- 0.350
(0.63 in.)
Approx. Overall Length
16.00
mm
+/- 0.350
(0.63 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1x16x16 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP010-016-CH-1 (5 Pcs) Dowel Pins - 1x16x16 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
9 units (45 pcs) Available Immediately | Item Discontinued - Up to 9 may be ordered online. No backorders. Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 5
Diameter (D)
1.000
mm
+ 0.002 / + 0.008
(0.039 in.)
Length (L)
16.00
mm
+/- 0.350
(0.63 in.)
Approx. Overall Length
16.00
mm
+/- 0.350
(0.63 in.)
Dowel Pins - 1x16x16 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP010-016-CH-1 (5 Pcs) Dowel Pins - 1x16x16 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
9 units (45 pcs) Available Immediately | Item Discontinued - Up to 9 may be ordered online. No backorders. Please contact us if you need a larger quantity
$5.00 AUD
$9.50 AUD $5.00 AUD
Per 5
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
4.00
mm
+/- 0.254
(0.157 in.)
Approx. Overall Length
4.00
mm
+/- 0.254
(0.157 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x4x4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-004-CH-1 (5 Pcs) Dowel Pins - 1.5x4x4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
29 units (145 pcs) Available Immediately | Further orders can be expected around Tue, Jul 22, 2025
$3.32 AUD
$3.32 AUD
Per 5
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
4.00
mm
+/- 0.254
(0.157 in.)
Approx. Overall Length
4.00
mm
+/- 0.254
(0.157 in.)
Dowel Pins - 1.5x4x4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-004-CH-1 (5 Pcs) Dowel Pins - 1.5x4x4 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
29 units (145 pcs) Available Immediately | Further orders can be expected around Tue, Jul 22, 2025
$3.32 AUD
$3.32 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
5.00
mm
+/- 0.254
(0.197 in.)
Approx. Overall Length
5.00
mm
+/- 0.254
(0.197 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x5x5 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-005-CH-1 (10 Pcs) Dowel Pins - 1.5x5x5 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
1 pack (10 pcs) Available Immediately | Further orders can be expected around Tue, Jul 22, 2025
$4.41 AUD
$4.41 AUD
Per 10
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
5.00
mm
+/- 0.254
(0.197 in.)
Approx. Overall Length
5.00
mm
+/- 0.254
(0.197 in.)
Dowel Pins - 1.5x5x5 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-005-CH-1 (10 Pcs) Dowel Pins - 1.5x5x5 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
1 pack (10 pcs) Available Immediately | Further orders can be expected around Tue, Jul 22, 2025
$4.41 AUD
$4.41 AUD
Per 10
View the product page first if you are unsure.
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
6.00
mm
+/- 0.254
(0.236 in.)
Approx. Overall Length
6.00
mm
+/- 0.254
(0.236 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x6x6 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-006-CH-1 (5 Pcs) Dowel Pins - 1.5x6x6 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
192 units (960 pcs) Available Immediately | Further orders can be expected around Mon, Feb 16, 2026
$26.32 AUD
$26.32 AUD
Per 5
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
6.00
mm
+/- 0.254
(0.236 in.)
Approx. Overall Length
6.00
mm
+/- 0.254
(0.236 in.)
Dowel Pins - 1.5x6x6 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-006-CH-1 (5 Pcs) Dowel Pins - 1.5x6x6 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
192 units (960 pcs) Available Immediately | Further orders can be expected around Mon, Feb 16, 2026
$26.32 AUD
$26.32 AUD
Per 5
View the product page first if you are unsure.
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
10.00
mm
+/- 0.350
(0.394 in.)
Approx. Overall Length
10.00
mm
+/- 0.350
(0.394 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x10x10 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-010-CH-1 (100 Pcs) Dowel Pins - 1.5x10x10 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 22, 2025
$20.50 AUD
$24.60 AUD $20.50 AUD
Per 100
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
10.00
mm
+/- 0.350
(0.394 in.)
Approx. Overall Length
10.00
mm
+/- 0.350
(0.394 in.)
Dowel Pins - 1.5x10x10 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-010-CH-1 (100 Pcs) Dowel Pins - 1.5x10x10 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 22, 2025
$20.50 AUD
$24.60 AUD $20.50 AUD
Per 100
View the product page first if you are unsure.
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
12.00
mm
+/- 0.350
(0.472 in.)
Approx. Overall Length
12.00
mm
+/- 0.350
(0.472 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x12x12 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-012-CH-1 (50 Pcs) Dowel Pins - 1.5x12x12 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
1 pack (50 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 50
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
12.00
mm
+/- 0.350
(0.472 in.)
Approx. Overall Length
12.00
mm
+/- 0.350
(0.472 in.)
Dowel Pins - 1.5x12x12 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-012-CH-1 (50 Pcs) Dowel Pins - 1.5x12x12 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
1 pack (50 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 50
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
14.00
mm
+/- 0.350
(0.551 in.)
Approx. Overall Length
14.00
mm
+/- 0.350
(0.551 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x14x14 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-014-CH-1 (100 Pcs) Dowel Pins - 1.5x14x14 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
14.00
mm
+/- 0.350
(0.551 in.)
Approx. Overall Length
14.00
mm
+/- 0.350
(0.551 in.)
Dowel Pins - 1.5x14x14 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-014-CH-1 (100 Pcs) Dowel Pins - 1.5x14x14 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
16.00
mm
+/- 0.350
(0.63 in.)
Approx. Overall Length
16.00
mm
+/- 0.350
(0.63 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x16x16 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-016-CH-1 (10 Pcs) Dowel Pins - 1.5x16x16 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
38 units (380 pcs) Available Immediately | Further orders can be expected around Tue, Jul 22, 2025
$4.68 AUD
$4.68 AUD
Per 10
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
16.00
mm
+/- 0.350
(0.63 in.)
Approx. Overall Length
16.00
mm
+/- 0.350
(0.63 in.)
Dowel Pins - 1.5x16x16 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-016-CH-1 (10 Pcs) Dowel Pins - 1.5x16x16 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
38 units (380 pcs) Available Immediately | Further orders can be expected around Tue, Jul 22, 2025
$4.68 AUD
$4.68 AUD
Per 10
View the product page first if you are unsure.
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
18.00
mm
+/- 0.420
(0.709 in.)
Approx. Overall Length
18.00
mm
+/- 0.420
(0.709 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x18x18 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-018-CH-1 Dowel Pins - 1.5x18x18 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
18.00
mm
+/- 0.420
(0.709 in.)
Approx. Overall Length
18.00
mm
+/- 0.420
(0.709 in.)
Dowel Pins - 1.5x18x18 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-018-CH-1 Dowel Pins - 1.5x18x18 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
20.00
mm
+/- 0.420
(0.787 in.)
Approx. Overall Length
20.00
mm
+/- 0.420
(0.787 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x20x20 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-020-CH-1 Dowel Pins - 1.5x20x20 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
20.00
mm
+/- 0.420
(0.787 in.)
Approx. Overall Length
20.00
mm
+/- 0.420
(0.787 in.)
Dowel Pins - 1.5x20x20 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-020-CH-1 Dowel Pins - 1.5x20x20 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
22.00
mm
+/- 0.420
(0.866 in.)
Approx. Overall Length
22.00
mm
+/- 0.420
(0.866 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x22x22 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-022-CH-1 Dowel Pins - 1.5x22x22 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
22.00
mm
+/- 0.420
(0.866 in.)
Approx. Overall Length
22.00
mm
+/- 0.420
(0.866 in.)
Dowel Pins - 1.5x22x22 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-022-CH-1 Dowel Pins - 1.5x22x22 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
24.00
mm
+/- 0.420
(0.945 in.)
Approx. Overall Length
24.00
mm
+/- 0.420
(0.945 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x24x24 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-024-CH-1 Dowel Pins - 1.5x24x24 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
24.00
mm
+/- 0.420
(0.945 in.)
Approx. Overall Length
24.00
mm
+/- 0.420
(0.945 in.)
Dowel Pins - 1.5x24x24 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-024-CH-1 Dowel Pins - 1.5x24x24 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
26.00
mm
+/- 0.420
(1.024 in.)
Approx. Overall Length
26.00
mm
+/- 0.420
(1.024 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x26x26 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-026-CH-1 Dowel Pins - 1.5x26x26 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
26.00
mm
+/- 0.420
(1.024 in.)
Approx. Overall Length
26.00
mm
+/- 0.420
(1.024 in.)
Dowel Pins - 1.5x26x26 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-026-CH-1 Dowel Pins - 1.5x26x26 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
28.00
mm
+/- 0.420
(1.102 in.)
Approx. Overall Length
28.00
mm
+/- 0.420
(1.102 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x28x28 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-028-CH-1 (15 Pcs) Dowel Pins - 1.5x28x28 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
1 pack (15 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$9.00 AUD
$17.10 AUD $9.00 AUD
Per 15
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
28.00
mm
+/- 0.420
(1.102 in.)
Approx. Overall Length
28.00
mm
+/- 0.420
(1.102 in.)
Dowel Pins - 1.5x28x28 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-028-CH-1 (15 Pcs) Dowel Pins - 1.5x28x28 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
1 pack (15 pcs) Available Immediately | Item Discontinued - Up to 1 may be ordered online. No backorders. Please contact us if you need a larger quantity
$9.00 AUD
$17.10 AUD $9.00 AUD
Per 15
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
30.00
mm
+/- 0.500
(1.181 in.)
Approx. Overall Length
30.00
mm
+/- 0.500
(1.181 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.5x30x30 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP015-030-CH-1 Dowel Pins - 1.5x30x30 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.500
mm
+ 0.002 / + 0.008
(0.059 in.)
Length (L)
30.00
mm
+/- 0.500
(1.181 in.)
Approx. Overall Length
30.00
mm
+/- 0.500
(1.181 in.)
Dowel Pins - 1.5x30x30 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP015-030-CH-1 Dowel Pins - 1.5x30x30 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Contact Us | Item Discontinued - Please contact us if you need a large quantity
Diameter (D)
1.588
mm
+ 0.002 / + 0.008
(0.063 in.)
Length (L)
4.76
mm
+/- 0.254
(0.187 in.)
Approx. Overall Length
4.76
mm
+/- 0.254
(0.187 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.588x4.76x4.76 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP016-005-CH-1 (50 Pcs) Dowel Pins - 1.588x4.76x4.76 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 08, 2025
$31.95 AUD
$38.35 AUD $31.95 AUD
Per 50
Diameter (D)
1.588
mm
+ 0.002 / + 0.008
(0.063 in.)
Length (L)
4.76
mm
+/- 0.254
(0.187 in.)
Approx. Overall Length
4.76
mm
+/- 0.254
(0.187 in.)
Dowel Pins - 1.588x4.76x4.76 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP016-005-CH-1 (50 Pcs) Dowel Pins - 1.588x4.76x4.76 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 08, 2025
$31.95 AUD
$38.35 AUD $31.95 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
1.588
mm
+ 0.002 / + 0.008
(0.063 in.)
Length (L)
6.35
mm
+/- 0.254
(0.25 in.)
Approx. Overall Length
6.35
mm
+/- 0.254
(0.25 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.588x6.35x6.35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP016-006-CH-1 (50 Pcs) Dowel Pins - 1.588x6.35x6.35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 08, 2025
$31.95 AUD
$38.35 AUD $31.95 AUD
Per 50
Diameter (D)
1.588
mm
+ 0.002 / + 0.008
(0.063 in.)
Length (L)
6.35
mm
+/- 0.254
(0.25 in.)
Approx. Overall Length
6.35
mm
+/- 0.254
(0.25 in.)
Dowel Pins - 1.588x6.35x6.35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP016-006-CH-1 (50 Pcs) Dowel Pins - 1.588x6.35x6.35 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Out of Stock | Backorder Now | Orders can be expected around Tue, Jul 08, 2025
$31.95 AUD
$38.35 AUD $31.95 AUD
Per 50
View the product page first if you are unsure.
Diameter (D)
1.588
mm
+ 0.002 / + 0.008
(0.063 in.)
Length (L)
7.94
mm
+/- 0.254
(0.313 in.)
Approx. Overall Length
7.94
mm
+/- 0.254
(0.313 in.)
Type
1 (Chamfer One End)
Dowel Pins - 1.588x7.94x7.94 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Standard: Based on DIN 6325   
Part Number: DP016-008-CH-1 (10 Pcs) Dowel Pins - 1.588x7.94x7.94 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
3 units (30 pcs) Available Immediately | Further orders can be expected around Tue, Jul 08, 2025
$4.86 AUD
$4.86 AUD
Per 10
Diameter (D)
1.588
mm
+ 0.002 / + 0.008
(0.063 in.)
Length (L)
7.94
mm
+/- 0.254
(0.313 in.)
Approx. Overall Length
7.94
mm
+/- 0.254
(0.313 in.)
Dowel Pins - 1.588x7.94x7.94 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
Material: Steel Alloy - Heat Treated and Ground Rc 58-62    Type: 1 (Chamfer One End)    Standard: Based on DIN 6325   
Part Number: DP016-008-CH-1 (10 Pcs) Dowel Pins - 1.588x7.94x7.94 mm - Steel Alloy - Heat Treated and Ground Rc 58-62
3 units (30 pcs) Available Immediately | Further orders can be expected around Tue, Jul 08, 2025
$4.86 AUD
$4.86 AUD
Per 10
View the product page first if you are unsure.