Gears - Spur - Standard - Module 0.8 - Stainless

2 Products in this selection
  • PCD in mm = No. of Teeth x 0.8. 20 Degree Pressure Angle.
  • The diameter increases by 0.5mm per tooth
  • Module 0.8. Approximately 2.51mm between the teeth.
Additional resources:
Module 0.8 Gear Racks
A more concise listing may be found on the Smallparts store at Gears - Spur - Standard - Module 0.8 - Stainless. Smallparts promote the most popular MBA products.
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Teeth
20
Pitch Circle Diameter (PD)
16.00
mm

(0.63 in.)
Bore (d)
5.000
mm

(0.197 in.)
Outside Diameter (OD)
17.60
mm
Face Width (FW)
5.00
mm
Spur Gears - 20 tooth - 16x5 mm - Stainless Steel 303 Quality Class ISO 7 - AGMA 10
Material: Stainless Steel 303 Quality Class ISO 7 - ( AGMA 10 )    Locking Method: Set Screw    Quality: 03 Stainless Steel. Quality Class ISO 7 - ( AGMA 10 )   
Part Number: G016B-20-M08-050-050-S3-G Spur Gears - 20 tooth - 16x5 mm - Stainless Steel 303 Quality Class ISO 7 - AGMA 10
25 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Teeth
20
Pitch Circle Diameter (PD)
16.00
mm

(0.63 in.)
Bore (d)
5.000
mm

(0.197 in.)
Outside Diameter (OD)
17.60
mm
Spur Gears - 20 tooth - 16x5 mm - Stainless Steel 303 Quality Class ISO 7 - AGMA 10
Material: Stainless Steel 303 Quality Class ISO 7 - ( AGMA 10 )    Face Width (FW): 5.00 mm    Locking Method: Set Screw    Quality: 03 Stainless Steel. Quality Class ISO 7 - ( AGMA 10 )   
Part Number: G016B-20-M08-050-050-S3-G Spur Gears - 20 tooth - 16x5 mm - Stainless Steel 303 Quality Class ISO 7 - AGMA 10
25 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$12.00 AUD
$22.80 AUD $12.00 AUD
Each
Teeth
20
Pitch Circle Diameter (PD)
16.00
mm

(0.63 in.)
Bore (d)
8.000
mm

(0.315 in.)
Outside Diameter (OD)
17.60
mm
Face Width (FW)
5.00
mm
Spur Gears - 20 tooth - 16x8 mm - Stainless Steel 303 Quality Class ISO 7 - AGMA 10
Material: Stainless Steel 303 Quality Class ISO 7 - ( AGMA 10 )    Locking Method: Set Screw    Quality: 03 Stainless Steel. Quality Class ISO 7 - ( AGMA 10 )   
Part Number: G016B-20-M08-050-080-S3-G Spur Gears - 20 tooth - 16x8 mm - Stainless Steel 303 Quality Class ISO 7 - AGMA 10
1 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$25.00 AUD
$47.50 AUD $25.00 AUD
Each
Teeth
20
Pitch Circle Diameter (PD)
16.00
mm

(0.63 in.)
Bore (d)
8.000
mm

(0.315 in.)
Outside Diameter (OD)
17.60
mm
Spur Gears - 20 tooth - 16x8 mm - Stainless Steel 303 Quality Class ISO 7 - AGMA 10
Material: Stainless Steel 303 Quality Class ISO 7 - ( AGMA 10 )    Face Width (FW): 5.00 mm    Locking Method: Set Screw    Quality: 03 Stainless Steel. Quality Class ISO 7 - ( AGMA 10 )   
Part Number: G016B-20-M08-050-080-S3-G Spur Gears - 20 tooth - 16x8 mm - Stainless Steel 303 Quality Class ISO 7 - AGMA 10
1 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$25.00 AUD
$47.50 AUD $25.00 AUD
Each