Gears - Spur - Standard - Module 0.4 - Brass

2 Products in this selection
  • PCD in mm = No. of Teeth x 0.4. 20 Degree Pressure Angle.
  • The diameter increases by 0.4mm per tooth
  • Module 0.4. Approximately 1.26mm between the teeth.
Additional resources:
Module 0.4 Gear Racks
A more concise listing may be found on the Smallparts store at Gears - Spur - Standard - Module 0.4 - Brass. Smallparts promote the most popular MBA products.
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Teeth
8
Pitch Circle Diameter (PD)
3.20
mm

(0.126 in.)
Bore (d)
1.500
mm

(0.059 in.)
Outside Diameter (OD)
4.000
mm
Face Width (FW)
4.000
mm
Type
Hubless
Spur Gears - 8 tooth - 3.2x1.5 mm - Brass
Material: Brass    Locking Method: None    Quality: Commercial   
Part Number: G003B-08-M04-040-015-B-N (10 Pcs) Spur Gears - 8 tooth - 3.2x1.5 mm - Brass
83 units (830 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 10
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Teeth
8
Pitch Circle Diameter (PD)
3.20
mm

(0.126 in.)
Bore (d)
1.500
mm

(0.059 in.)
Outside Diameter (OD)
4.000
mm
Spur Gears - 8 tooth - 3.2x1.5 mm - Brass
Material: Brass    Face Width (FW): 4.000 mm    Type: Hubless    Locking Method: None    Quality: Commercial   
Part Number: G003B-08-M04-040-015-B-N (10 Pcs) Spur Gears - 8 tooth - 3.2x1.5 mm - Brass
83 units (830 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 10
Teeth
60
Pitch Circle Diameter (PD)
24.00
mm

(0.945 in.)
Bore (d)
6.000
mm

(0.236 in.)
Outside Diameter (OD)
24.800
mm
Face Width (FW)
5.000
mm
Spur Gears - 60 tooth - 24x6 mm - Brass
Material: Brass    Locking Method: No Set Screw    Quality: ISO 8 - ( AGMA 9 )   
Part Number: G024B-60-M04-050-060-B-P Spur Gears - 60 tooth - 24x6 mm - Brass
1 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Each
Teeth
60
Pitch Circle Diameter (PD)
24.00
mm

(0.945 in.)
Bore (d)
6.000
mm

(0.236 in.)
Outside Diameter (OD)
24.800
mm
Spur Gears - 60 tooth - 24x6 mm - Brass
Material: Brass    Face Width (FW): 5.000 mm    Locking Method: No Set Screw    Quality: ISO 8 - ( AGMA 9 )   
Part Number: G024B-60-M04-050-060-B-P Spur Gears - 60 tooth - 24x6 mm - Brass
1 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$10.00 AUD
$19.00 AUD $10.00 AUD
Each