Gears - Spur - Hubless - Module 0.5 - Plastic

2 Products in this selection
  • PCD in mm = No. of Teeth x 0.5. 20 Degree Pressure Angle.
  • The diameter increases by 0.5mm per tooth
  • Module 0.5. Approximately 1.57mm between the teeth.
Additional resources:
A more concise listing may be found on the Smallparts store at Gears - Spur - Hubless - Module 0.5 - Plastic. Smallparts promote the most popular MBA products.
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Face Width (FW) Type Indicative
Image
Teeth
15
Pitch Circle Diameter (PD)
7.50
mm

(0.295 in.)
Bore (d)
2.000
mm

(0.079 in.)
Outside Diameter (OD)
8.500
mm
Face Width (FW)
4.00
mm
Type
Hubless
Spur Gears - 15 tooth - 7.5x2 mm - Acetal
Material: Acetal    Locking Method: None    Quality: Commercial - Molded   
Part Number: G008B-15-M05-040-020-A-N Spur Gears - 15 tooth - 7.5x2 mm - Acetal
1 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.00 AUD
$11.40 AUD $6.00 AUD
Each
Teeth Pitch Circle Diameter (PD) Bore (d) Outside Diameter (OD) Indicative
Image
Teeth
15
Pitch Circle Diameter (PD)
7.50
mm

(0.295 in.)
Bore (d)
2.000
mm

(0.079 in.)
Outside Diameter (OD)
8.500
mm
Spur Gears - 15 tooth - 7.5x2 mm - Acetal
Material: Acetal    Face Width (FW): 4.00 mm    Type: Hubless    Locking Method: None    Quality: Commercial - Molded   
Part Number: G008B-15-M05-040-020-A-N Spur Gears - 15 tooth - 7.5x2 mm - Acetal
1 Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$6.00 AUD
$11.40 AUD $6.00 AUD
Each
Teeth
70
Pitch Circle Diameter (PD)
35.00
mm

(1.378 in.)
Bore (d)
10.000
mm

(0.394 in.)
Outside Diameter (OD)
36.000
mm
Face Width (FW)
5.000
mm
Type
Hubless
Spur Gears - 70 tooth - 35x10 mm - Acetal - No Insert
Material: Acetal - No Insert    Locking Method: None    Quality: ISO 7 (AGMA 10)   
Part Number: G035B-70-M05-050-100-A-N (5 Pcs) Spur Gears - 70 tooth - 35x10 mm - Acetal - No Insert
1 pack (5 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 5
Teeth
70
Pitch Circle Diameter (PD)
35.00
mm

(1.378 in.)
Bore (d)
10.000
mm

(0.394 in.)
Outside Diameter (OD)
36.000
mm
Spur Gears - 70 tooth - 35x10 mm - Acetal - No Insert
Material: Acetal - No Insert    Face Width (FW): 5.000 mm    Type: Hubless    Locking Method: None    Quality: ISO 7 (AGMA 10)   
Part Number: G035B-70-M05-050-100-A-N (5 Pcs) Spur Gears - 70 tooth - 35x10 mm - Acetal - No Insert
1 pack (5 pcs) Available Immediately | Item Discontinued - Only the quantity available may be ordered - Please contact us if you need a larger quantity
$8.00 AUD
$15.20 AUD $8.00 AUD
Per 5