Springs - Drawbar - Zinc Plated
(Table View)
Combined Categories:
Click to see all Drawbar Springs
Product features, properties and information
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit.
The spring rate indicates the load required to pull out the first 25mm of the spring
All dimensions on this website are shown in mm unless otherwise indicated.
Click on the linked part numbers in the table below for more details.

Rate kg.cm |
Max. Deflection mm |
Max Load kg. |
Length mm |
Diameter mm |
Material | Part Number (Click for prices) |
Stock |
---|---|---|---|---|---|---|---|
28 | 50.8 (2.000 in.) |
22 | 152.4 (6.000 in.) |
25.4 (1.000 in.) |
Zinc Plated | DBS-254-152-M | 0 |
57 | 48.2 (1.898 in.) |
43 | 177.8 (7.000 in.) |
28.5 (1.122 in.) |
Zinc Plated | DBS-285-178-M | 0 |
86 | 53.3 (2.098 in.) |
72 | 190.5 (7.500 in.) |
34.9 (1.374 in.) |
Zinc Plated | DBS-349-191-M | 0 |
144 | 48.2 (1.898 in.) |
106 | 206.3 (8.122 in.) |
38.1 (1.500 in.) |
Zinc Plated | DBS-381-206-M | 0 |
172 | 101.6 (4.000 in.) |
276 | 492.1 (19.374 in.) |
57.1 (2.248 in.) |
Zinc Plated | DBS-571-492-M | 0 |
178 | 45.7 (1.799 in.) |
136 | 184.1 (7.248 in.) |
39.6 (1.559 in.) |
Zinc Plated | DBS-396-184-M | 0 |
230 | 50.8 (2.000 in.) |
181 | 244.4 (9.622 in.) |
44.4 (1.748 in.) |
Zinc Plated | DBS-444-244-M | 0 |
288 | 60.9 (2.398 in.) |
272 | 339.7 (13.374 in.) |
57.1 (2.248 in.) |
Zinc Plated | DBS-571-340-M | 0 |
Combined Categories:
Click to see all Drawbar Springs
View a PDF catalogue of this category
or scroll up for prices and availabilities
Other Store Pages
Click Page Banner Below
TopMain Pages
Click Page Banner Below
TopTop