Bearings - Linear - Ball - Stainless Steel - Closed
(Table View)
Related Information:
Precision Shafting To Suit Bearings
Combined Categories:
Click to see all Closed Linear Ball Bearings
Product features, properties and information
Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.
Use with hardened precision ground shafting.
Shaft tolerance: h6 (Normal Fit), j6 (Close Fit).
Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit).
Max Temp: 100 oC Intermittent, 80 Deg C continuous.
All dimensions on this website are shown in mm unless otherwise indicated.
Click on the linked part numbers in the table below for more details.
| Inner Diameter (d) mm |
Outer Diameter (D) mm |
Length ( L / l ) mm |
Dynamic Load N |
Static Load N |
Wiper Configuration | Groove Base Dia. (G) mm |
Groove Width (W1) mm |
Ball Cicuits (Nr.) | Weight g |
Part Number (Click for prices) |
Stock |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.350 (0.250 in.) |
12.700 (0.500 in.) |
19.050 / 13.081 (0.750 in.) |
84.5 | 0.991 (0.039 in.) |
3 | LCB-0064-013-019-S440 | 0 | ||||
| 9.525 (0.375 in.) |
15.875 (0.625 in.) |
22.225 / 16.256 (0.875 in.) |
164.6 | 0.991 (0.039 in.) |
4 | LCB-0095-016-022-S440 | 0 | ||||
| 12.700 (0.500 in.) |
22.225 (0.875 in.) |
31.750 / 24.562 (1.250 in.) |
378.1 | 1.168 (0.046 in.) |
4 | LCB-0127-022-032-S440 | 0 | ||||
| 19.050 (0.750 in.) |
31.496 (1.240 in.) |
41.275 / 29.312 (1.625 in.) |
889.6 | 1.422 (0.056 in.) |
5 | LCB-0191-031-041-S440 | 0 |
Related Information:
Precision Shafting To Suit Bearings
Combined Categories:
Click to see all Closed Linear Ball Bearings
View a PDF catalogue of this category
or scroll up for prices and availabilities
Other Store Pages
Click Page Banner Below
TopMain Pages
Click Page Banner Below
TopTop