Miniature Bearings Australia Pty Ltd

Rod Ends - Steel - PTFE Lined - Tight Fit - Male

Product features, properties and information

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

All dimensions on this website are shown in mm unless otherwise indicated.
Click on the linked part numbers in the table below for more details.

Diagram - Rod Ends - Steel - PTFE Lined - Tight Fit - Male

  


Eye Size (d1): 4.826 mm

Part Number: REM-048-L-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is close in appearance
to actual product.

About 2 weeks after ordered

Part Number
REM-048-L-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 4.826 mm (0.190 in.)
Overall Length (L): 39.70 mm (1.563 in.)
Thread Size: 10-32 UNF Left
Thread Length (l2): 19.05 mm (0.750 in.)
Head Width (W): 6.35 mm (0.250 in.)
Eye Width (W1): 7.92 mm (0.312 in.)
Head Diameter (D): 15.88 mm (0.625 in.)
Centre Height (l1): 31.75 mm (1.250 in.)

Minimum quantities apply to this item.

$18.41 Each ($20.25 incl GST). (Total cost $1841.00 )
About 2 weeks
BULK PACK
$132.80 for 5 Units ($146.08 incl GST). (Total cost $132.80 )
About 2 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: REM-048-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is close in appearance
to actual product.

About 2 weeks after ordered

Part Number
REM-048-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 4.826 mm (0.190 in.)
Overall Length (L): 39.70 mm (1.563 in.)
Thread Size: 10-32 UNF Right
Thread Length (l2): 19.05 mm (0.750 in.)
Head Width (W): 6.35 mm (0.250 in.)
Eye Width (W1): 7.92 mm (0.312 in.)
Head Diameter (D): 15.88 mm (0.625 in.)
Centre Height (l1): 31.75 mm (1.250 in.)

Minimum quantities apply to this item.

$18.41 Each ($20.25 incl GST). (Total cost $1841.00 )
About 2 weeks
BULK PACK
$132.80 for 5 Units ($146.08 incl GST). (Total cost $132.80 )
About 2 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Eye Size (d1): 5.000 mm

Part Number: REM-050-L-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is close in appearance
to actual product.

About 2 weeks after ordered

Part Number
REM-050-L-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 5.000 mm (0.197 in.)
Overall Length (L): 41.00 mm (1.614 in.)
Thread Size: M5x0.8 Left
Thread Length (l2): 20.00 mm (0.787 in.)
Head Width (W): 7.00 mm (0.276 in.)
Eye Width (W1): 8.00 mm (0.315 in.)
Head Diameter (D): 16.00 mm (0.630 in.)
Centre Height (l1): 33.00 mm (1.299 in.)

Minimum quantities apply to this item.

$15.50 Each ($17.05 incl GST). (Total cost $1550.00 )
About 2 weeks
BULK PACK
$775.00 for 50 Units ($852.50 incl GST). (Total cost $775.00 )
About 2 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: REM-050-R-CT-N

 *** IN STOCK NOW ***

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is close in appearance
to actual product.

IN STOCK NOW

Retail Price: $34.27
Online Price: $28.15

Qty Available Now: 2

More than 2:
2 weeks

Part Number
REM-050-R-CT-N

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 5.000 mm (0.197 in.)
Overall Length (L): 41.00 mm (1.614 in.)
Thread Size: M5x0.8 Right
Thread Length (l2): 20.00 mm (0.787 in.)
Head Width (W): 7.00 mm (0.276 in.)
Eye Width (W1): 8.00 mm (0.315 in.)
Head Diameter (D): 16.00 mm (0.630 in.)
Centre Height (l1): 33.00 mm (1.299 in.)

Online Price $28.15 incl. GST Each
(Online price only)

Change the quantity and click the button. 2 available now. If you order more than 2, the item will be placed on backorder.

$25.59 Each ($28.15 incl GST). (Total cost $25.59 )
2 Available
$15.23 Each ($16.75 incl GST). (Total cost $1523.00 )
About 2 weeks
BULK PACK
$761.50 for 50 Units ($837.65 incl GST). (Total cost $761.50 )
About 2 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Eye Size (d1): 6.350 mm

Part Number: REM-064-L-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is close in appearance
to actual product.

About 2 weeks after ordered

Part Number
REM-064-L-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 6.350 mm (0.250 in.)
Overall Length (L): 49.20 mm (1.937 in.)
Thread Size: 1/4-28 UNF Left
Thread Length (l2): 25.40 mm (1.000 in.)
Head Width (W): 7.14 mm (0.281 in.)
Eye Width (W1): 9.53 mm (0.375 in.)
Head Diameter (D): 19.05 mm (0.750 in.)
Centre Height (l1): 39.67 mm (1.562 in.)

Minimum quantities apply to this item.

$21.23 Each ($23.35 incl GST). (Total cost $2123.00 )
About 2 weeks
BULK PACK
$153.50 for 5 Units ($168.85 incl GST). (Total cost $153.50 )
About 2 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: REM-064-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is close in appearance
to actual product.

Retail Price: $38.01
Online Price: $31.55

About 4 to 5 weeks after ordered

Part Number
REM-064-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 6.350 mm (0.250 in.)
Overall Length (L): 49.20 mm (1.937 in.)
Thread Size: 1/4-28 UNF Right
Thread Length (l2): 25.40 mm (1.000 in.)
Head Width (W): 7.14 mm (0.281 in.)
Eye Width (W1): 9.53 mm (0.375 in.)
Head Diameter (D): 19.05 mm (0.750 in.)
Centre Height (l1): 39.67 mm (1.562 in.)

Online Price $31.55 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$28.68 Each ($31.55 incl GST). (Total cost $28.68 )
About 4 to 5 weeks
$24.05 Each ($26.46 incl GST). (Total cost $2405.00 )
About 4 to 5 weeks
BULK PACK
$251.40 for 10 Units ($276.54 incl GST). (Total cost $251.40 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Eye Size (d1): 7.938 mm

Part Number: REM-079-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is close in appearance
to actual product.

Retail Price: $38.01
Online Price: $31.55

About 4 to 5 weeks after ordered

Part Number
REM-079-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 7.938 mm (0.313 in.)
Overall Length (L): 58.72 mm (2.312 in.)
Thread Size: 5/16-24 UNF Right
Thread Length (l2): 31.75 mm (1.250 in.)
Head Width (W): 8.74 mm (0.344 in.)
Eye Width (W1): 11.10 mm (0.437 in.)
Head Diameter (D): 22.23 mm (0.875 in.)
Centre Height (l1): 47.63 mm (1.875 in.)

Online Price $31.55 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$28.68 Each ($31.55 incl GST). (Total cost $28.68 )
About 4 to 5 weeks
$24.05 Each ($26.46 incl GST). (Total cost $2405.00 )
About 4 to 5 weeks
BULK PACK
$251.40 for 10 Units ($276.54 incl GST). (Total cost $251.40 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Eye Size (d1): 8.000 mm

Part Number: REM-080-R-CT-B

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is close in appearance
to actual product.

About 2 weeks after ordered

Part Number
REM-080-R-CT-B

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 8.000 mm (0.315 in.)
Overall Length (L): 53.00 mm (2.087 in.)
Thread Size: M8x1.25 Right
Thread Length (l2): 25.00 mm (0.984 in.)
Head Width (W): 9.00 mm (0.354 in.)
Eye Width (W1): 12.00 mm (0.472 in.)
Head Diameter (D): 22.00 mm (0.866 in.)
Centre Height (l1): 42.00 mm (1.654 in.)

Minimum quantities apply to this item.

$17.23 Each ($18.95 incl GST). (Total cost $1723.00 )
About 2 weeks
BULK PACK
$124.25 for 5 Units ($136.68 incl GST). (Total cost $124.25 )
About 2 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Eye Size (d1): 9.525 mm

Part Number: REM-095-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is close in appearance
to actual product.

Retail Price: $42.95
Online Price: $36.05

About 4 to 5 weeks after ordered

Part Number
REM-095-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 9.525 mm (0.375 in.)
Overall Length (L): 61.93 mm (2.438 in.)
Thread Size: 3/8-24 UNF Right
Thread Length (l2): 31.75 mm (1.250 in.)
Head Width (W): 10.31 mm (0.406 in.)
Eye Width (W1): 12.70 mm (0.500 in.)
Head Diameter (D): 25.40 mm (1.000 in.)
Centre Height (l1): 49.23 mm (1.938 in.)

Online Price $36.05 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$32.77 Each ($36.05 incl GST). (Total cost $32.77 )
About 4 to 5 weeks
$27.59 Each ($30.35 incl GST). (Total cost $2759.00 )
About 4 to 5 weeks
BULK PACK
$287.70 for 10 Units ($316.47 incl GST). (Total cost $287.70 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Eye Size (d1): 12.700 mm

Part Number: REM-127-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is close in appearance
to actual product.

Retail Price: $56.16
Online Price: $48.05

About 4 to 5 weeks after ordered

Part Number
REM-127-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 12.700 mm (0.500 in.)
Overall Length (L): 78.59 mm (3.094 in.)
Thread Size: 1/2-20 UNF Right
Thread Length (l2): 38.10 mm (1.500 in.)
Head Width (W): 12.70 mm (0.500 in.)
Eye Width (W1): 15.88 mm (0.625 in.)
Head Diameter (D): 33.32 mm (1.312 in.)
Centre Height (l1): 61.93 mm (2.438 in.)

Online Price $48.05 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$43.68 Each ($48.05 incl GST). (Total cost $43.68 )
About 4 to 5 weeks
$37.05 Each ($40.76 incl GST). (Total cost $3705.00 )
About 4 to 5 weeks
BULK PACK
$386.80 for 10 Units ($425.48 incl GST). (Total cost $386.80 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Eye Size (d1): 15.875 mm

Part Number: REM-159-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is indicative only.

Retail Price: $70.45
Online Price: $61.05

About 4 to 5 weeks after ordered

Part Number
REM-159-R-CT

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 15.875 mm (0.625 in.)
Overall Length (L): 85.73 mm (3.375 in.)
Thread Size: 5/8-18 UNF Right
Thread Length (l2): 41.28 mm (1.625 in.)
Head Width (W): 14.27 mm (0.562 in.)
Eye Width (W1): 19.05 mm (0.750 in.)
Head Diameter (D): 38.10 mm (1.500 in.)
Centre Height (l1): 66.68 mm (2.625 in.)

Online Price $61.05 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$55.50 Each ($61.05 incl GST). (Total cost $55.50 )
About 4 to 5 weeks
$47.41 Each ($52.15 incl GST). (Total cost $4741.00 )
About 4 to 5 weeks
BULK PACK
$494.10 for 10 Units ($543.51 incl GST). (Total cost $494.10 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Eye Size (d1): 30.000 mm

Part Number: REM-300-R-CT-A

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Photo is indicative only.

Retail Price: $427.30
Online Price: $385.45

About 2 weeks after ordered

Part Number
REM-300-R-CT-A

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Eye Size (d1): 30.000 mm (1.181 in.)
Overall Length (L): 143.50 mm (5.650 in.)
Thread Size: M30x2 Right
Thread Length (l2): 66.00 mm (2.598 in.)
Head Width (W): 26.00 mm (1.024 in.)
Eye Width (W1): 37.00 mm (1.457 in.)
Head Diameter (D): 67.00 mm (2.638 in.)
Centre Height (l1): 110.00 mm (4.331 in.)

Online Price $385.45 incl. GST Per Pack of 2
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 2 weeks.

$350.41 Per Pack of 2 ($385.45 incl GST). (Total cost $350.41 )
About 2 weeks
$303.41 Per Pack of 2 ($333.75 incl GST). (Total cost $30341.00 )
About 2 weeks
BULK PACK
$1637.50 for 5 Packs of 2 ($1801.25 incl GST). (Total cost $1637.50 )
About 2 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


This is page 1 of 1 showing items 1 to 12 of 12 items.




View a PDF catalogue of this category

or scroll up for prices and availabilities

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122787 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122787 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.