Miniature Bearings Australia Pty Ltd

Pins - Dowel - Extractable

Product features, properties and information

Hardened and Ground Steel 100 Cr6. Din 7979.

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes.

An air release flat is ground along the full length of the pin to overcome the problem of pressure build up by trapped air.

Hardness 55-62 HRC, HV550-650

Extractable pins may or may not have a flat to vent pressure when pulling

Also known as parallel pins

All dimensions on this website are shown in mm unless otherwise indicated.
Click on the linked part numbers in the table below for more details.

Related Information:
Remover and Setter Tool

Include all:
Dowel Pins
Diagram - Pins - Dowel - Extractable

Select Diameter (D) mm

  


Diameter (D): 4.000 mm

Part Number: DP040-010-CH-1E

 *** IN STOCK NOW ***

Pins - Dowel - Extractable
Photo is indicative only.

IN STOCK NOW

Retail Price: A$5.95
Online Price: A$4.95

Qty Available Now: 1

More than 1:
4 to 5 weeks

Part Number
DP040-010-CH-1E

Pins - Dowel - Extractable
Diameter (D): 4.000 mm (+0.004/+0.012) (0.157 in.)
Length (L): 10.00 mm (+/-0.350) (0.394 in.)
Overall Length: 10.00 mm (+/-0.350) (0.394 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price A$4.95 incl. GST Each
(Online price only)

Change the quantity and click the button. 1 available now. If you order more than 1, the item will be placed on backorder.

$4.50 Each ($4.95 incl GST). (Total cost $4.50 )
1 Available
$2.68 Each ($2.95 incl GST). (Total cost $268.00 )
About 4 to 5 weeks
BULK PACK
$268.00 for 100 Units ($294.80 incl GST). (Total cost $268.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP040-014-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $7.95
Online Price: $5.95

About 4 to 5 weeks after ordered

Part Number
DP040-014-CH-1E

Pins - Dowel - Extractable
Diameter (D): 4.000 mm (+0.004/+0.012) (0.157 in.)
Length (L): 14.00 mm (+/-0.350) (0.551 in.)
Overall Length: 14.00 mm (+/-0.350) (0.551 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $5.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$5.41 Each ($5.95 incl GST). (Total cost $5.41 )
About 4 to 5 weeks
$2.77 Each ($3.05 incl GST). (Total cost $277.00 )
About 4 to 5 weeks
BULK PACK
$277.00 for 100 Units ($304.70 incl GST). (Total cost $277.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP040-020-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $7.95
Online Price: $5.95

About 4 to 5 weeks after ordered

Part Number
DP040-020-CH-1E

Pins - Dowel - Extractable
Diameter (D): 4.000 mm (+0.004/+0.012) (0.157 in.)
Length (L): 20.00 mm (+/-0.420) (0.787 in.)
Overall Length: 20.00 mm (+/-0.420) (0.787 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $5.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$5.41 Each ($5.95 incl GST). (Total cost $5.41 )
About 4 to 5 weeks
$2.86 Each ($3.15 incl GST). (Total cost $286.00 )
About 4 to 5 weeks
BULK PACK
$286.00 for 100 Units ($314.60 incl GST). (Total cost $286.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP040-025-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $3.95
Online Price: $3.95

About 4 to 5 weeks after ordered

Part Number
DP040-025-CH-1E

Pins - Dowel - Extractable
Diameter (D): 4.000 mm (+0.004/+0.012) (0.157 in.)
Length (L): 25.00 mm (+/-0.420) (0.984 in.)
Overall Length: 25.00 mm (+/-0.420) (0.984 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $3.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$3.59 Each ($3.95 incl GST). (Total cost $3.59 )
About 4 to 5 weeks
$1.68 Each ($1.85 incl GST). (Total cost $168.00 )
About 4 to 5 weeks
BULK PACK
$84.00 for 50 Units ($92.40 incl GST). (Total cost $84.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Diameter (D): 5.000 mm

Part Number: DP050-012-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $2.95
Online Price: $2.95

About 4 to 5 weeks after ordered

Part Number
DP050-012-CH-1E

Pins - Dowel - Extractable
Diameter (D): 5.000 mm (+0.004/+0.012) (0.197 in.)
Length (L): 12.00 mm (+/-0.350) (0.472 in.)
Overall Length: 12.00 mm (+/-0.350) (0.472 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $2.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$2.68 Each ($2.95 incl GST). (Total cost $2.68 )
About 4 to 5 weeks
$1.41 Each ($1.55 incl GST). (Total cost $141.00 )
About 4 to 5 weeks
BULK PACK
$70.50 for 50 Units ($77.55 incl GST). (Total cost $70.50 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP050-016-CH-1E

 *** IN STOCK NOW ***

Pins - Dowel - Extractable
Photo is indicative only.

IN STOCK NOW

Retail Price: $2.95
Online Price: $2.95

Qty Available Now: 7

More than 7:
4 to 5 weeks

Part Number
DP050-016-CH-1E

Pins - Dowel - Extractable
Diameter (D): 5.000 mm (+0.004/+0.012) (0.197 in.)
Length (L): 16.00 mm (+/-0.350) (0.630 in.)
Overall Length: 16.00 mm (+/-0.350) (0.630 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $2.95 incl. GST Each
(Online price only)

Change the quantity and click the button. 7 available now. If you order more than 7, the item will be placed on backorder.

$2.68 Each ($2.95 incl GST). (Total cost $2.68 )
7 Available
$1.59 Each ($1.75 incl GST). (Total cost $159.00 )
About 4 to 5 weeks
BULK PACK
$79.50 for 50 Units ($87.45 incl GST). (Total cost $79.50 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP050-020-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $2.95
Online Price: $2.95

About 4 to 5 weeks after ordered

Part Number
DP050-020-CH-1E

Pins - Dowel - Extractable
Diameter (D): 5.000 mm (+0.004/+0.012) (0.197 in.)
Length (L): 20.00 mm (+/-0.420) (0.787 in.)
Overall Length: 20.00 mm (+/-0.420) (0.787 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $2.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$2.68 Each ($2.95 incl GST). (Total cost $2.68 )
About 4 to 5 weeks
$1.41 Each ($1.55 incl GST). (Total cost $141.00 )
About 4 to 5 weeks
BULK PACK
$70.50 for 50 Units ($77.55 incl GST). (Total cost $70.50 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP050-024-CH-1E

 *** IN STOCK NOW ***

Pins - Dowel - Extractable
Photo is indicative only.

IN STOCK NOW

Retail Price: $2.95
Online Price: $2.95

Qty Available Now: 20

More than 20:
4 to 5 weeks

Part Number
DP050-024-CH-1E

Pins - Dowel - Extractable
Diameter (D): 5.000 mm (+0.004/+0.012) (0.197 in.)
Length (L): 24.00 mm (+/-0.420) (0.945 in.)
Overall Length: 24.00 mm (+/-0.420) (0.945 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $2.95 incl. GST Each
(Online price only)

Change the quantity and click the button. 20 available now. If you order more than 20, the item will be placed on backorder.

$2.68 Each ($2.95 incl GST). (Total cost $2.68 )
20 Available
$1.59 Each ($1.75 incl GST). (Total cost $159.00 )
About 4 to 5 weeks
BULK PACK
$79.50 for 50 Units ($87.45 incl GST). (Total cost $79.50 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP050-025-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $2.95
Online Price: $2.95

About 4 to 5 weeks after ordered

Part Number
DP050-025-CH-1E

Pins - Dowel - Extractable
Diameter (D): 5.000 mm (+0.004/+0.012) (0.197 in.)
Length (L): 25.00 mm (+/-0.420) (0.984 in.)
Overall Length: 25.00 mm (+/-0.420) (0.984 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $2.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$2.68 Each ($2.95 incl GST). (Total cost $2.68 )
About 4 to 5 weeks
$1.41 Each ($1.55 incl GST). (Total cost $141.00 )
About 4 to 5 weeks
BULK PACK
$70.50 for 50 Units ($77.55 incl GST). (Total cost $70.50 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP050-030-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $3.95
Online Price: $3.95

About 4 to 5 weeks after ordered

Part Number
DP050-030-CH-1E

Pins - Dowel - Extractable
Diameter (D): 5.000 mm (+0.004/+0.012) (0.197 in.)
Length (L): 30.00 mm (+/-0.500) (1.181 in.)
Overall Length: 30.00 mm (+/-0.500) (1.181 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $3.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$3.59 Each ($3.95 incl GST). (Total cost $3.59 )
About 4 to 5 weeks
$1.86 Each ($2.05 incl GST). (Total cost $186.00 )
About 4 to 5 weeks
BULK PACK
$93.00 for 50 Units ($102.30 incl GST). (Total cost $93.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP050-040-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $3.95
Online Price: $3.95

About 4 to 5 weeks after ordered

Part Number
DP050-040-CH-1E

Pins - Dowel - Extractable
Diameter (D): 5.000 mm (+0.004/+0.012) (0.197 in.)
Length (L): 40.00 mm (+/-0.500) (1.575 in.)
Overall Length: 40.00 mm (+/-0.500) (1.575 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $3.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$3.59 Each ($3.95 incl GST). (Total cost $3.59 )
About 4 to 5 weeks
$2.14 Each ($2.35 incl GST). (Total cost $214.00 )
About 4 to 5 weeks
BULK PACK
$107.00 for 50 Units ($117.70 incl GST). (Total cost $107.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP050-050-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $4.95
Online Price: $4.95

About 4 to 5 weeks after ordered

Part Number
DP050-050-CH-1E

Pins - Dowel - Extractable
Diameter (D): 5.000 mm (+0.004/+0.012) (0.197 in.)
Length (L): 50.00 mm (+/-0.600) (1.969 in.)
Overall Length: 50.00 mm (+/-0.600) (1.969 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M3

Online Price $4.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$4.50 Each ($4.95 incl GST). (Total cost $4.50 )
About 4 to 5 weeks
$2.41 Each ($2.65 incl GST). (Total cost $241.00 )
About 4 to 5 weeks
BULK PACK
$241.00 for 100 Units ($265.10 incl GST). (Total cost $241.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Diameter (D): 6.000 mm

Part Number: DP060-010-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $3.95
Online Price: $3.95

About 4 to 5 weeks after ordered

Part Number
DP060-010-CH-1E

Pins - Dowel - Extractable
Diameter (D): 6.000 mm (+0.006/+0.015) (0.236 in.)
Length (L): 10.00 mm (+/-0.350) (0.394 in.)
Overall Length: 10.00 mm (+/-0.350) (0.394 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M4-0.70

Online Price $3.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$3.59 Each ($3.95 incl GST). (Total cost $3.59 )
About 4 to 5 weeks
$1.86 Each ($2.05 incl GST). (Total cost $186.00 )
About 4 to 5 weeks
BULK PACK
$93.00 for 50 Units ($102.30 incl GST). (Total cost $93.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP060-012-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $2.95
Online Price: $2.95

About 4 to 5 weeks after ordered

Part Number
DP060-012-CH-1E

Pins - Dowel - Extractable
Diameter (D): 6.000 mm (+0.006/+0.015) (0.236 in.)
Length (L): 12.00 mm (+/-0.350) (0.472 in.)
Overall Length: 12.00 mm (+/-0.350) (0.472 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M4

Online Price $2.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$2.68 Each ($2.95 incl GST). (Total cost $2.68 )
About 4 to 5 weeks
$1.32 Each ($1.45 incl GST). (Total cost $132.00 )
About 4 to 5 weeks
BULK PACK
$66.00 for 50 Units ($72.60 incl GST). (Total cost $66.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP060-014-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $1.95
Online Price: $1.95

About 4 to 5 weeks after ordered

Part Number
DP060-014-CH-1E

Pins - Dowel - Extractable
Diameter (D): 6.000 mm (+0.006/+0.015) (0.236 in.)
Length (L): 14.00 mm (+/-0.350) (0.551 in.)
Overall Length: 14.00 mm (+/-0.350) (0.551 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M4

Online Price $1.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$1.77 Each ($1.95 incl GST). (Total cost $1.77 )
About 4 to 5 weeks
$0.41 Each ($0.45 incl GST). (Total cost $41.00 )
About 4 to 5 weeks
BULK PACK
$41.00 for 100 Units ($45.10 incl GST). (Total cost $41.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP060-016-CH-1E

Pins - Dowel - Extractable
Photo is indicative only.

Retail Price: $4.95
Online Price: $4.95

About 4 to 5 weeks after ordered

Part Number
DP060-016-CH-1E

Pins - Dowel - Extractable
Diameter (D): 6.000 mm (+0.006/+0.015) (0.236 in.)
Length (L): 16.00 mm (+/-0.350) (0.630 in.)
Overall Length: 16.00 mm (+/-0.350) (0.630 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M4

Online Price $4.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$4.50 Each ($4.95 incl GST). (Total cost $4.50 )
About 4 to 5 weeks
$2.77 Each ($3.05 incl GST). (Total cost $277.00 )
About 4 to 5 weeks
BULK PACK
$138.50 for 50 Units ($152.35 incl GST). (Total cost $138.50 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP060-020-CH-1E

 *** IN STOCK NOW ***

Pins - Dowel - Extractable
Photo is indicative only.

IN STOCK NOW

Retail Price: $1.95
Online Price: $1.95

Qty Available Now: 3

More than 3:
4 to 5 weeks

Part Number
DP060-020-CH-1E

Pins - Dowel - Extractable
Diameter (D): 6.000 mm (+0.006/+0.015) (0.236 in.)
Length (L): 20.00 mm (+/-0.420) (0.787 in.)
Overall Length: 20.00 mm (+/-0.420) (0.787 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M4

Online Price $1.95 incl. GST Each
(Online price only)

Change the quantity and click the button. 3 available now. If you order more than 3, the item will be placed on backorder.

$1.77 Each ($1.95 incl GST). (Total cost $1.77 )
3 Available
$0.59 Each ($0.65 incl GST). (Total cost $59.00 )
About 4 to 5 weeks
BULK PACK
$59.00 for 100 Units ($64.90 incl GST). (Total cost $59.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP060-024-CH-1E

 *** IN STOCK NOW ***

Pins - Dowel - Extractable
Photo is indicative only.

IN STOCK NOW

Retail Price: $1.95
Online Price: $1.95

Qty Available Now: 39

More than 39:
4 to 5 weeks

Part Number
DP060-024-CH-1E

Pins - Dowel - Extractable
Diameter (D): 6.000 mm (+0.006/+0.015) (0.236 in.)
Length (L): 24.00 mm (+/-0.420) (0.945 in.)
Overall Length: 24.00 mm (+/-0.420) (0.945 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M4

Online Price $1.95 incl. GST Each
(Online price only)

Change the quantity and click the button. 39 available now. If you order more than 39, the item will be placed on backorder.

$1.77 Each ($1.95 incl GST). (Total cost $1.77 )
39 Available
$0.59 Each ($0.65 incl GST). (Total cost $59.00 )
About 4 to 5 weeks
BULK PACK
$59.00 for 100 Units ($64.90 incl GST). (Total cost $59.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP060-025-CH-1E

 *** IN STOCK NOW ***

Pins - Dowel - Extractable
Photo is indicative only.

IN STOCK NOW

Retail Price: $1.95
Online Price: $1.95

Qty Available Now: 180

More than 180:
4 to 5 weeks

Part Number
DP060-025-CH-1E

Pins - Dowel - Extractable
Diameter (D): 6.000 mm (+0.006/+0.015) (0.236 in.)
Length (L): 25.00 mm (+/-0.420) (0.984 in.)
Overall Length: 25.00 mm (+/-0.420) (0.984 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M4

Online Price $1.95 incl. GST Each
(Online price only)

Change the quantity and click the button. 180 available now. If you order more than 180, the item will be placed on backorder.

$1.77 Each ($1.95 incl GST). (Total cost $1.77 )
180 Available
$0.50 Each ($0.55 incl GST). (Total cost $50.00 )
180 Available
BULK PACK
$50.00 for 100 Units ($55.00 incl GST). (Total cost $50.00 )
180 Available

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: DP060-028-CH-1E

 *** IN STOCK NOW ***

Pins - Dowel - Extractable
Photo is indicative only.

IN STOCK NOW

Retail Price: $0.95
Online Price: $0.95

Qty Available Now: 2

More than 2:
No orders above stock quantity
will be accepted.

Part Number
DP060-028-CH-1E

Pins - Dowel - Extractable
Diameter (D): 6.000 mm (+0.006/+0.015) (0.236 in.)
Length (L): 28.00 mm (+/-0.420) (1.102 in.)
Overall Length: 28.00 mm (+/-0.420) (1.102 in.)
Material: Carbon Steel Rc 58-62
Thread Size: M4

DELETED ITEM:-
Only 2 Available Subject to Prior Sales.
No backorders.

Clearance Price $0.86 Each

(Online price only)

Change the quantity and click the button. If you order more than 2, the remainder will be cancelled.

$0.86 Each ($0.95 incl GST). (Total cost $0.86 )
2 Available

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.



Diameter (D) 6.000 is continued next page...
This is page 1 of 7 showing items 1 to 20 of 134 items.


PAGE INDEX
Pins - Dowel - Extractable

Page Number 1 (This Page)
Page Number 2 From Diameter (D) mm 6.000 to Diameter (D) mm 8.000
Page Number 3 From Diameter (D) mm 8.000 to Diameter (D) mm 9.525
Page Number 4 From Diameter (D) mm 9.525 to Diameter (D) mm 12.000
Page Number 5 From Diameter (D) mm 12.000 to Diameter (D) mm 15.875
Page Number 6 From Diameter (D) mm 15.875 to Diameter (D) mm 20.000
Page Number 7 From Diameter (D) mm 20.000 to Diameter (D) mm 25.400

Related Information:
Remover and Setter Tool

Include all:
Dowel Pins


View a PDF catalogue of this category

or scroll up for prices and availabilities

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122786 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122786 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.