Miniature Bearings Australia Pty Ltd

Gears - Spur - Module 1 - Plastic

Product features, properties and information

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Acetal

Metallic and plastic.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.

For easy ready selected sets of rack and gear please see the HES website

All dimensions on this website are shown in mm unless otherwise indicated.
Click on the linked part numbers in the table below for more details.

Diagram - Gears - Spur - Module 1 - Plastic

Select Teeth

  


Teeth: 12

Part Number: G012B-12-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: A$12.95
Online Price: A$9.96

About 4 to 5 weeks after ordered

Part Number
G012B-12-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 12
Pitch Circle Diameter (PD): 12.00 mm (0.472 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 14.000 mm (0.551 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price A$9.96 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$9.05 Each ($9.96 incl GST). (Total cost $9.05 )
About 4 to 5 weeks
$7.14 Each ($7.85 incl GST). (Total cost $714.00 )
About 4 to 5 weeks
BULK PACK
$714.00 for 100 Units ($785.40 incl GST). (Total cost $714.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G012B-12-M1-090-060-A-P

 *** IN STOCK NOW ***

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

IN STOCK NOW

Retail Price: $17.95
Online Price: $12.95

Qty Available Now: 2

More than 2:
4 to 5 weeks

Part Number
G012B-12-M1-090-060-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 12
Pitch Circle Diameter (PD): 12.00 mm (0.472 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 14.000 mm (0.551 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $12.95 incl. GST Each
(Online price only)

Change the quantity and click the button. 2 available now. If you order more than 2, the item will be placed on backorder.

$11.77 Each ($12.95 incl GST). (Total cost $11.77 )
2 Available
$9.14 Each ($10.05 incl GST). (Total cost $914.00 )
About 4 to 5 weeks
BULK PACK
$95.00 for 10 Units ($104.50 incl GST). (Total cost $95.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 13

Part Number: G013B-13-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $13.95
Online Price: $9.96

About 4 to 5 weeks after ordered

Part Number
G013B-13-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 13
Pitch Circle Diameter (PD): 13.00 mm (0.512 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 15.000 mm (0.591 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $9.96 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$9.05 Each ($9.96 incl GST). (Total cost $9.05 )
About 4 to 5 weeks
$7.23 Each ($7.95 incl GST). (Total cost $723.00 )
About 4 to 5 weeks
BULK PACK
$723.00 for 100 Units ($795.30 incl GST). (Total cost $723.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G013B-13-M1-090-060-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $15.95
Online Price: $10.95

About 4 to 5 weeks after ordered

Part Number
G013B-13-M1-090-060-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 13
Pitch Circle Diameter (PD): 13.00 mm (0.512 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 15.000 mm (0.591 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $10.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$9.95 Each ($10.95 incl GST). (Total cost $9.95 )
About 4 to 5 weeks
$7.95 Each ($8.75 incl GST). (Total cost $795.00 )
About 4 to 5 weeks
BULK PACK
$795.00 for 100 Units ($874.50 incl GST). (Total cost $795.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 14

Part Number: G014B-14-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $13.95
Online Price: $9.96

About 4 to 5 weeks after ordered

Part Number
G014B-14-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 14
Pitch Circle Diameter (PD): 14.00 mm (0.551 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 16.000 mm (0.630 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $9.96 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$9.05 Each ($9.96 incl GST). (Total cost $9.05 )
About 4 to 5 weeks
$7.23 Each ($7.95 incl GST). (Total cost $723.00 )
About 4 to 5 weeks
BULK PACK
$723.00 for 100 Units ($795.30 incl GST). (Total cost $723.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 15

Part Number: G015B-15-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $13.95
Online Price: $9.96

About 4 to 5 weeks after ordered

Part Number
G015B-15-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 15
Pitch Circle Diameter (PD): 15.00 mm (0.591 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 17.000 mm (0.669 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $9.96 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$9.05 Each ($9.96 incl GST). (Total cost $9.05 )
About 4 to 5 weeks
$7.32 Each ($8.05 incl GST). (Total cost $732.00 )
About 4 to 5 weeks
BULK PACK
$732.00 for 100 Units ($805.20 incl GST). (Total cost $732.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G015B-15-M1-100-060-N-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $28.55
Online Price: $22.95

About 4 to 5 weeks after ordered

Part Number
G015B-15-M1-100-060-N-P

Gears - Spur - Module 1 - Plastic
Teeth: 15
Pitch Circle Diameter (PD): 15.00 mm (0.591 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 17.000 mm (0.669 in.)
Face Width (FW): 10.000 mm (0.394 in.)
Overall Width (FW+HL): 20.00 mm (0.787 in.)
Hub Diameter (D1): 12.00 mm (0.472 in.)
Hub Projection (HL): 10.00 mm (0.394 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Nylon
Quality: No Insert / Commercial - Machined

Online Price $22.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$20.86 Each ($22.95 incl GST). (Total cost $20.86 )
About 4 to 5 weeks
$18.05 Each ($19.86 incl GST). (Total cost $1805.00 )
About 4 to 5 weeks
BULK PACK
$1805.00 for 100 Units ($1985.50 incl GST). (Total cost $1805.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G015B-15-M1-090-060-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $15.95
Online Price: $10.95

About 4 to 5 weeks after ordered

Part Number
G015B-15-M1-090-060-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 15
Pitch Circle Diameter (PD): 15.00 mm (0.591 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 17.000 mm (0.669 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $10.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$9.95 Each ($10.95 incl GST). (Total cost $9.95 )
About 4 to 5 weeks
$8.05 Each ($8.86 incl GST). (Total cost $805.00 )
About 4 to 5 weeks
BULK PACK
$805.00 for 100 Units ($885.50 incl GST). (Total cost $805.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G015B-15-M1-050-100-A-N

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $31.41
Online Price: $25.55

About 4 to 5 weeks after ordered

Part Number
G015B-15-M1-050-100-A-N

Gears - Spur - Module 1 - Plastic
Teeth: 15
Pitch Circle Diameter (PD): 15.00 mm (0.591 in.)
Bore (d): 10.000 mm (0.394 in.)
Outside Diameter (OD): 17.000 mm (0.669 in.)
Face Width (FW): 5.000 mm (0.197 in.)
Overall Width (FW+HL): 5.00 mm (0.197 in.)
Hub Diameter (D1): Hubless mm
Hub Projection (HL): None mm
Locking Method: None
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: ISO 7 (AGMA 10)

Online Price $25.55 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$23.23 Each ($25.55 incl GST). (Total cost $23.23 )
About 4 to 5 weeks
$20.14 Each ($22.15 incl GST). (Total cost $2014.00 )
About 4 to 5 weeks
BULK PACK
$2014.00 for 100 Units ($2215.40 incl GST). (Total cost $2014.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 16

Part Number: G016B-16-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $14.95
Online Price: $10.95

About 4 to 5 weeks after ordered

Part Number
G016B-16-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 16
Pitch Circle Diameter (PD): 16.00 mm (0.630 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 18.000 mm (0.709 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $10.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$9.95 Each ($10.95 incl GST). (Total cost $9.95 )
About 4 to 5 weeks
$7.41 Each ($8.15 incl GST). (Total cost $741.00 )
About 4 to 5 weeks
BULK PACK
$741.00 for 100 Units ($815.10 incl GST). (Total cost $741.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G016B-16-M1-100-060-N-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $28.88
Online Price: $23.25

About 4 to 5 weeks after ordered

Part Number
G016B-16-M1-100-060-N-P

Gears - Spur - Module 1 - Plastic
Teeth: 16
Pitch Circle Diameter (PD): 16.00 mm (0.630 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 18.000 mm (0.709 in.)
Face Width (FW): 10.000 mm (0.394 in.)
Overall Width (FW+HL): 20.00 mm (0.787 in.)
Hub Diameter (D1): 12.00 mm (0.472 in.)
Hub Projection (HL): 10.00 mm (0.394 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Nylon
Quality: No Insert / Commercial - Machined

Online Price $23.25 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$21.14 Each ($23.25 incl GST). (Total cost $21.14 )
About 4 to 5 weeks
$18.23 Each ($20.05 incl GST). (Total cost $1823.00 )
About 4 to 5 weeks
BULK PACK
$1823.00 for 100 Units ($2005.30 incl GST). (Total cost $1823.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G016B-16-M1-050-100-A-N

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $32.06
Online Price: $26.15

About 4 to 5 weeks after ordered

Part Number
G016B-16-M1-050-100-A-N

Gears - Spur - Module 1 - Plastic
Teeth: 16
Pitch Circle Diameter (PD): 16.00 mm (0.630 in.)
Bore (d): 10.000 mm (0.394 in.)
Outside Diameter (OD): 18.000 mm (0.709 in.)
Face Width (FW): 5.000 mm (0.197 in.)
Overall Width (FW+HL): 5.00 mm (0.197 in.)
Hub Diameter (D1): Hubless mm
Hub Projection (HL): None mm
Locking Method: None
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: ISO 7 (AGMA 10)

Online Price $26.15 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$23.77 Each ($26.15 incl GST). (Total cost $23.77 )
About 4 to 5 weeks
$20.68 Each ($22.75 incl GST). (Total cost $2068.00 )
About 4 to 5 weeks
BULK PACK
$2068.00 for 100 Units ($2274.80 incl GST). (Total cost $2068.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 17

Part Number: G017B-17-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $14.95
Online Price: $10.95

About 4 to 5 weeks after ordered

Part Number
G017B-17-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 17
Pitch Circle Diameter (PD): 17.00 mm (0.669 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 19.000 mm (0.748 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $10.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$9.95 Each ($10.95 incl GST). (Total cost $9.95 )
About 4 to 5 weeks
$7.50 Each ($8.25 incl GST). (Total cost $750.00 )
About 4 to 5 weeks
BULK PACK
$750.00 for 100 Units ($825.00 incl GST). (Total cost $750.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 18

Part Number: G018B-18-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $14.95
Online Price: $10.95

About 4 to 5 weeks after ordered

Part Number
G018B-18-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 18
Pitch Circle Diameter (PD): 18.00 mm (0.709 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 20.000 mm (0.787 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $10.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$9.95 Each ($10.95 incl GST). (Total cost $9.95 )
About 4 to 5 weeks
$7.59 Each ($8.35 incl GST). (Total cost $759.00 )
About 4 to 5 weeks
BULK PACK
$759.00 for 100 Units ($834.90 incl GST). (Total cost $759.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G018B-18-M1-100-060-N-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $29.21
Online Price: $23.55

About 4 to 5 weeks after ordered

Part Number
G018B-18-M1-100-060-N-P

Gears - Spur - Module 1 - Plastic
Teeth: 18
Pitch Circle Diameter (PD): 18.00 mm (0.709 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 20.000 mm (0.787 in.)
Face Width (FW): 10.000 mm (0.394 in.)
Overall Width (FW+HL): 20.00 mm (0.787 in.)
Hub Diameter (D1): 14.00 mm (0.551 in.)
Hub Projection (HL): 10.00 mm (0.394 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Nylon
Quality: No Insert / Commercial - Machined

Online Price $23.55 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$21.41 Each ($23.55 incl GST). (Total cost $21.41 )
About 4 to 5 weeks
$18.50 Each ($20.35 incl GST). (Total cost $1850.00 )
About 4 to 5 weeks
BULK PACK
$1850.00 for 100 Units ($2035.00 incl GST). (Total cost $1850.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G018B-18-M1-090-060-A-P

 *** IN STOCK NOW ***

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

IN STOCK NOW

Retail Price: $15.95
Online Price: $11.95

Qty Available Now: 1

More than 1:
4 to 5 weeks

Part Number
G018B-18-M1-090-060-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 18
Pitch Circle Diameter (PD): 18.00 mm (0.709 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 20.000 mm (0.787 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $11.95 incl. GST Each
(Online price only)

Change the quantity and click the button. 1 available now. If you order more than 1, the item will be placed on backorder.

$10.86 Each ($11.95 incl GST). (Total cost $10.86 )
1 Available
$8.32 Each ($9.15 incl GST). (Total cost $832.00 )
About 4 to 5 weeks
BULK PACK
$832.00 for 100 Units ($915.20 incl GST). (Total cost $832.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G018B-18-M1-050-100-A-N

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $32.62
Online Price: $26.65

About 4 to 5 weeks after ordered

Part Number
G018B-18-M1-050-100-A-N

Gears - Spur - Module 1 - Plastic
Teeth: 18
Pitch Circle Diameter (PD): 18.00 mm (0.709 in.)
Bore (d): 10.000 mm (0.394 in.)
Outside Diameter (OD): 20.000 mm (0.787 in.)
Face Width (FW): 5.000 mm (0.197 in.)
Overall Width (FW+HL): 5.00 mm (0.197 in.)
Hub Diameter (D1): Hubless mm
Hub Projection (HL): None mm
Locking Method: None
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: ISO 7 (AGMA 10)

Online Price $26.65 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$24.23 Each ($26.65 incl GST). (Total cost $24.23 )
About 4 to 5 weeks
$21.05 Each ($23.16 incl GST). (Total cost $2105.00 )
About 4 to 5 weeks
BULK PACK
$2105.00 for 100 Units ($2315.50 incl GST). (Total cost $2105.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 19

Part Number: G019B-19-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $14.95
Online Price: $10.95

About 4 to 5 weeks after ordered

Part Number
G019B-19-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 19
Pitch Circle Diameter (PD): 19.00 mm (0.748 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 21.000 mm (0.827 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $10.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$9.95 Each ($10.95 incl GST). (Total cost $9.95 )
About 4 to 5 weeks
$7.77 Each ($8.55 incl GST). (Total cost $777.00 )
About 4 to 5 weeks
BULK PACK
$777.00 for 100 Units ($854.70 incl GST). (Total cost $777.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 20

Part Number: G020B-20-M1-090-040-A-P

 *** IN STOCK NOW ***

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

IN STOCK NOW

Retail Price: $17.95
Online Price: $12.95

Qty Available Now: 7

More than 7:
4 to 5 weeks

Part Number
G020B-20-M1-090-040-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 20
Pitch Circle Diameter (PD): 20.00 mm (0.787 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 22.000 mm (0.866 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $12.95 incl. GST Each
(Online price only)

Change the quantity and click the button. 7 available now. If you order more than 7, the item will be placed on backorder.

$11.77 Each ($12.95 incl GST). (Total cost $11.77 )
7 Available
$9.14 Each ($10.05 incl GST). (Total cost $914.00 )
About 4 to 5 weeks
BULK PACK
$95.00 for 10 Units ($104.50 incl GST). (Total cost $95.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G020B-20-M1-090-050-A-P

Gears - Spur - Module 1 - Plastic
Photo is close in appearance
to actual product.

Retail Price: $16.95
Online Price: $11.95

About 4 to 5 weeks after ordered

Part Number
G020B-20-M1-090-050-A-P

Gears - Spur - Module 1 - Plastic
Teeth: 20
Pitch Circle Diameter (PD): 20.00 mm (0.787 in.)
Bore (d): 5.000 mm (0.197 in.)
Outside Diameter (OD): 22.000 mm (0.866 in.)
Face Width (FW): 9.000 mm (0.354 in.)
Overall Width (FW+HL): 17.00 mm (0.669 in.)
Hub Diameter (D1): 9.00 mm (0.354 in.)
Hub Projection (HL): 8.00 mm (0.315 in.)
Locking Method: No Set Screw
Pressure Angle: 20 Deg.
Material: Acetal - No Insert
Quality: Commercial - Molded

Online Price $11.95 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$10.86 Each ($11.95 incl GST). (Total cost $10.86 )
About 4 to 5 weeks
$8.68 Each ($9.55 incl GST). (Total cost $868.00 )
About 4 to 5 weeks
BULK PACK
$868.00 for 100 Units ($954.80 incl GST). (Total cost $868.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.



Teeth 20 is continued next page...
This is page 1 of 6 showing items 1 to 20 of 113 items.


PAGE INDEX
Gears - Spur - Module 1 - Plastic

Page Number 1 (This Page)
Page Number 2 From Teeth 20 to Teeth 28
Page Number 3 From Teeth 28 to Teeth 42
Page Number 4 From Teeth 42 to Teeth 60
Page Number 5 From Teeth 60 to Teeth 85
Page Number 6 From Teeth 85 to Teeth 140


View a PDF catalogue of this category

or scroll up for prices and availabilities

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122787 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122787 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.