Miniature Bearings Australia Pty Ltd

Gears - Spur - Module 0.8 - Plastic With Insert

Product features, properties and information

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

Metallic and plastic.

FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.

For easy ready selected sets of rack and gear please see the HES website

All dimensions on this website are shown in mm unless otherwise indicated.
Click on the linked part numbers in the table below for more details.

Diagram - Gears - Spur - Module 0.8 - Plastic with Insert

Select Teeth

  


Teeth: 20

Part Number: G016B-20-M08-030-030-AB-G

 *** IN STOCK NOW ***

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

IN STOCK NOW

Retail Price: A$30.53
Online Price: A$24.75

Qty Available Now: 1

More than 1:
4 to 5 weeks

Part Number
G016B-20-M08-030-030-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 20
Pitch Circle Diameter (PD): 16.00 mm (0.630 in.)
Bore (d): 3.000 mm (0.118 in.)
Outside Diameter (OD): 17.60 mm (0.693 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price A$24.75 incl. GST Each
(Online price only)

Change the quantity and click the button. 1 available now. If you order more than 1, the item will be placed on backorder.

$22.50 Each ($24.75 incl GST). (Total cost $22.50 )
1 Available
$19.50 Each ($21.45 incl GST). (Total cost $1950.00 )
About 4 to 5 weeks
BULK PACK
$1950.00 for 100 Units ($2145.00 incl GST). (Total cost $1950.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G016B-20-M08-030-040-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.53
Online Price: $24.75

About 4 to 5 weeks after ordered

Part Number
G016B-20-M08-030-040-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 20
Pitch Circle Diameter (PD): 16.00 mm (0.630 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 17.60 mm (0.693 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $24.75 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.50 Each ($24.75 incl GST). (Total cost $22.50 )
About 4 to 5 weeks
$19.50 Each ($21.45 incl GST). (Total cost $1950.00 )
About 4 to 5 weeks
BULK PACK
$1950.00 for 100 Units ($2145.00 incl GST). (Total cost $1950.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G016B-20-M08-030-050-AB-G

 *** IN STOCK NOW ***

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

IN STOCK NOW

Retail Price: $30.53
Online Price: $24.75

Qty Available Now: 1

More than 1:
4 to 5 weeks

Part Number
G016B-20-M08-030-050-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 20
Pitch Circle Diameter (PD): 16.00 mm (0.630 in.)
Bore (d): 5.000 mm (0.197 in.)
Outside Diameter (OD): 17.60 mm (0.693 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $24.75 incl. GST Each
(Online price only)

Change the quantity and click the button. 1 available now. If you order more than 1, the item will be placed on backorder.

$22.50 Each ($24.75 incl GST). (Total cost $22.50 )
1 Available
$19.50 Each ($21.45 incl GST). (Total cost $1950.00 )
About 4 to 5 weeks
BULK PACK
$1950.00 for 100 Units ($2145.00 incl GST). (Total cost $1950.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G016B-20-M08-030-060-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.53
Online Price: $24.75

About 4 to 5 weeks after ordered

Part Number
G016B-20-M08-030-060-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 20
Pitch Circle Diameter (PD): 16.00 mm (0.630 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 17.60 mm (0.693 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $24.75 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.50 Each ($24.75 incl GST). (Total cost $22.50 )
About 4 to 5 weeks
$19.50 Each ($21.45 incl GST). (Total cost $1950.00 )
About 4 to 5 weeks
BULK PACK
$1950.00 for 100 Units ($2145.00 incl GST). (Total cost $1950.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 22

Part Number: G018B-22-M08-030-030-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.64
Online Price: $24.85

About 4 to 5 weeks after ordered

Part Number
G018B-22-M08-030-030-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 22
Pitch Circle Diameter (PD): 17.60 mm (0.693 in.)
Bore (d): 3.000 mm (0.118 in.)
Outside Diameter (OD): 19.20 mm (0.756 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $24.85 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.59 Each ($24.85 incl GST). (Total cost $22.59 )
About 4 to 5 weeks
$19.59 Each ($21.55 incl GST). (Total cost $1959.00 )
About 4 to 5 weeks
BULK PACK
$1959.00 for 100 Units ($2154.90 incl GST). (Total cost $1959.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G018B-22-M08-030-040-AB-G

 *** IN STOCK NOW ***

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

IN STOCK NOW

Retail Price: $30.64
Online Price: $24.85

Qty Available Now: 1

More than 1:
4 to 5 weeks

Part Number
G018B-22-M08-030-040-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 22
Pitch Circle Diameter (PD): 17.60 mm (0.693 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 19.20 mm (0.756 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $24.85 incl. GST Each
(Online price only)

Change the quantity and click the button. 1 available now. If you order more than 1, the item will be placed on backorder.

$22.59 Each ($24.85 incl GST). (Total cost $22.59 )
1 Available
$19.59 Each ($21.55 incl GST). (Total cost $1959.00 )
About 4 to 5 weeks
BULK PACK
$1959.00 for 100 Units ($2154.90 incl GST). (Total cost $1959.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G018B-22-M08-030-050-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.64
Online Price: $24.85

About 4 to 5 weeks after ordered

Part Number
G018B-22-M08-030-050-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 22
Pitch Circle Diameter (PD): 17.60 mm (0.693 in.)
Bore (d): 5.000 mm (0.197 in.)
Outside Diameter (OD): 19.20 mm (0.756 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $24.85 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.59 Each ($24.85 incl GST). (Total cost $22.59 )
About 4 to 5 weeks
$19.59 Each ($21.55 incl GST). (Total cost $1959.00 )
About 4 to 5 weeks
BULK PACK
$1959.00 for 100 Units ($2154.90 incl GST). (Total cost $1959.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G018B-22-M08-030-060-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.64
Online Price: $24.85

About 4 to 5 weeks after ordered

Part Number
G018B-22-M08-030-060-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 22
Pitch Circle Diameter (PD): 17.60 mm (0.693 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 19.20 mm (0.756 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $24.85 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.59 Each ($24.85 incl GST). (Total cost $22.59 )
About 4 to 5 weeks
$19.59 Each ($21.55 incl GST). (Total cost $1959.00 )
About 4 to 5 weeks
BULK PACK
$1959.00 for 100 Units ($2154.90 incl GST). (Total cost $1959.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 24

Part Number: G019B-24-M08-030-030-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.86
Online Price: $25.05

About 4 to 5 weeks after ordered

Part Number
G019B-24-M08-030-030-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 24
Pitch Circle Diameter (PD): 19.20 mm (0.756 in.)
Bore (d): 3.000 mm (0.118 in.)
Outside Diameter (OD): 20.80 mm (0.819 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.05 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.77 Each ($25.05 incl GST). (Total cost $22.77 )
About 4 to 5 weeks
$19.77 Each ($21.75 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks
BULK PACK
$1977.00 for 100 Units ($2174.70 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G019B-24-M08-030-040-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.86
Online Price: $25.05

About 4 to 5 weeks after ordered

Part Number
G019B-24-M08-030-040-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 24
Pitch Circle Diameter (PD): 19.20 mm (0.756 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 20.80 mm (0.819 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.05 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.77 Each ($25.05 incl GST). (Total cost $22.77 )
About 4 to 5 weeks
$19.77 Each ($21.75 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks
BULK PACK
$1977.00 for 100 Units ($2174.70 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G019B-24-M08-030-050-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.86
Online Price: $25.05

About 4 to 5 weeks after ordered

Part Number
G019B-24-M08-030-050-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 24
Pitch Circle Diameter (PD): 19.20 mm (0.756 in.)
Bore (d): 5.000 mm (0.197 in.)
Outside Diameter (OD): 20.80 mm (0.819 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.05 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.77 Each ($25.05 incl GST). (Total cost $22.77 )
About 4 to 5 weeks
$19.77 Each ($21.75 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks
BULK PACK
$1977.00 for 100 Units ($2174.70 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G019B-24-M08-030-060-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.86
Online Price: $25.05

About 4 to 5 weeks after ordered

Part Number
G019B-24-M08-030-060-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 24
Pitch Circle Diameter (PD): 19.20 mm (0.756 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 20.80 mm (0.819 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.05 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.77 Each ($25.05 incl GST). (Total cost $22.77 )
About 4 to 5 weeks
$19.77 Each ($21.75 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks
BULK PACK
$1977.00 for 100 Units ($2174.70 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 25

Part Number: G020B-25-M08-030-030-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.96
Online Price: $25.15

About 4 to 5 weeks after ordered

Part Number
G020B-25-M08-030-030-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 25
Pitch Circle Diameter (PD): 20.00 mm (0.787 in.)
Bore (d): 3.000 mm (0.118 in.)
Outside Diameter (OD): 21.60 mm (0.850 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.15 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.86 Each ($25.15 incl GST). (Total cost $22.86 )
About 4 to 5 weeks
$19.77 Each ($21.75 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks
BULK PACK
$1977.00 for 100 Units ($2174.70 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G020B-25-M08-030-040-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.96
Online Price: $25.15

About 4 to 5 weeks after ordered

Part Number
G020B-25-M08-030-040-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 25
Pitch Circle Diameter (PD): 20.00 mm (0.787 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 21.60 mm (0.850 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.15 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.86 Each ($25.15 incl GST). (Total cost $22.86 )
About 4 to 5 weeks
$19.77 Each ($21.75 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks
BULK PACK
$1977.00 for 100 Units ($2174.70 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G020B-25-M08-030-050-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.96
Online Price: $25.15

About 4 to 5 weeks after ordered

Part Number
G020B-25-M08-030-050-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 25
Pitch Circle Diameter (PD): 20.00 mm (0.787 in.)
Bore (d): 5.000 mm (0.197 in.)
Outside Diameter (OD): 21.60 mm (0.850 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.15 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.86 Each ($25.15 incl GST). (Total cost $22.86 )
About 4 to 5 weeks
$19.77 Each ($21.75 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks
BULK PACK
$1977.00 for 100 Units ($2174.70 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G020B-25-M08-030-060-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.96
Online Price: $25.15

About 4 to 5 weeks after ordered

Part Number
G020B-25-M08-030-060-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 25
Pitch Circle Diameter (PD): 20.00 mm (0.787 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 21.60 mm (0.850 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.15 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.86 Each ($25.15 incl GST). (Total cost $22.86 )
About 4 to 5 weeks
$19.77 Each ($21.75 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks
BULK PACK
$1977.00 for 100 Units ($2174.70 incl GST). (Total cost $1977.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Teeth: 26

Part Number: G021B-26-M08-030-030-AB-G

 *** IN STOCK NOW ***

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

IN STOCK NOW

Retail Price: $30.96
Online Price: $25.15

Qty Available Now: 1

More than 1:
4 to 5 weeks

Part Number
G021B-26-M08-030-030-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 26
Pitch Circle Diameter (PD): 20.80 mm (0.819 in.)
Bore (d): 3.000 mm (0.118 in.)
Outside Diameter (OD): 22.40 mm (0.882 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.15 incl. GST Each
(Online price only)

Change the quantity and click the button. 1 available now. If you order more than 1, the item will be placed on backorder.

$22.86 Each ($25.15 incl GST). (Total cost $22.86 )
1 Available
$19.86 Each ($21.85 incl GST). (Total cost $1986.00 )
About 4 to 5 weeks
BULK PACK
$1986.00 for 100 Units ($2184.60 incl GST). (Total cost $1986.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G021B-26-M08-030-040-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.96
Online Price: $25.15

About 4 to 5 weeks after ordered

Part Number
G021B-26-M08-030-040-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 26
Pitch Circle Diameter (PD): 20.80 mm (0.819 in.)
Bore (d): 4.000 mm (0.157 in.)
Outside Diameter (OD): 22.40 mm (0.882 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.15 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.86 Each ($25.15 incl GST). (Total cost $22.86 )
About 4 to 5 weeks
$19.86 Each ($21.85 incl GST). (Total cost $1986.00 )
About 4 to 5 weeks
BULK PACK
$1986.00 for 100 Units ($2184.60 incl GST). (Total cost $1986.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G021B-26-M08-030-050-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.96
Online Price: $25.15

About 4 to 5 weeks after ordered

Part Number
G021B-26-M08-030-050-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 26
Pitch Circle Diameter (PD): 20.80 mm (0.819 in.)
Bore (d): 5.000 mm (0.197 in.)
Outside Diameter (OD): 22.40 mm (0.882 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.15 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.86 Each ($25.15 incl GST). (Total cost $22.86 )
About 4 to 5 weeks
$19.86 Each ($21.85 incl GST). (Total cost $1986.00 )
About 4 to 5 weeks
BULK PACK
$1986.00 for 100 Units ($2184.60 incl GST). (Total cost $1986.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: G021B-26-M08-030-060-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Photo is close in appearance
to actual product.

Retail Price: $30.96
Online Price: $25.15

About 4 to 5 weeks after ordered

Part Number
G021B-26-M08-030-060-AB-G

Gears - Spur - Module 0.8 - Plastic with Insert
Teeth: 26
Pitch Circle Diameter (PD): 20.80 mm (0.819 in.)
Bore (d): 6.000 mm (0.236 in.)
Outside Diameter (OD): 22.40 mm (0.882 in.)
Face Width (FW): 3.00 mm (0.118 in.)
Hub Diameter (D1): 13.00 mm (0.512 in.)
Hub Projection (HL): 6.50 mm (0.256 in.)
Locking Method: Set Screw
Pressure Angle: 20 Deg.
Material: Acetal
Quality: Brass Insert

Online Price $25.15 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.86 Each ($25.15 incl GST). (Total cost $22.86 )
About 4 to 5 weeks
$19.86 Each ($21.85 incl GST). (Total cost $1986.00 )
About 4 to 5 weeks
BULK PACK
$1986.00 for 100 Units ($2184.60 incl GST). (Total cost $1986.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.



Continued next page with "Teeth = 28"...
nThis is page 1 of 6 showing items 1 to 20 of 113 items.


PAGE INDEX
Gears - Spur - Module 0.8 - Plastic with Insert

Page Number 1 (This Page)
Page Number 2 From Teeth 28 to Teeth 36
Page Number 3 From Teeth 36 to Teeth 45
Page Number 4 From Teeth 45 to Teeth 56
Page Number 5 From Teeth 56 to Teeth 72
Page Number 6 From Teeth 72 to Teeth 128

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122787 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122787 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.