Miniature Bearings Australia Pty Ltd

Bearings - Thrust - Ball - Flat - Stainless Steel

Product features, properties and information

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary.

Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races.

Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate.

Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

All dimensions on this website are shown in mm unless otherwise indicated.
Click on the linked part numbers in the table below for more details.

Include all:
Ball Thrust Bearings
Diagram - Bearings - Thrust - Ball - Flat - Stainless Steel

  


Nominal Shaft Size (d1): 3.175 mm

Part Number: T-0032-0109-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: A$11.95
Online Price: A$11.32

About 4 to 5 weeks after ordered

Part Number
T-0032-0109-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 3.175 mm (+ 0.076 / +0.203) (0.125 in.)
OD (D1): 11.113 mm (-0.013/-0.208) (0.438 in.)
Thickness (T): 4.763 mm (+0.076/+0.215) (0.188 in.)
(d2): 3.175 mm (-0.025/-0.202) (0.125 in.)
OD (D2): 11.113 mm (-0.025/-0.202) (0.438 in.)
Dynamic Load Capacity: 15 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price A$11.32 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$10.29 Each ($11.32 incl GST). (Total cost $10.29 )
About 4 to 5 weeks
$5.50 Each ($6.05 incl GST). (Total cost $550.00 )
About 4 to 5 weeks
BULK PACK
$550.00 for 100 Units ($605.00 incl GST). (Total cost $550.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 4.763 mm

Part Number: T-0048-0125-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $12.95
Online Price: $12.58

About 4 to 5 weeks after ordered

Part Number
T-0048-0125-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 4.763 mm (+ 0.088 / +0.190) (0.188 in.)
OD (D1): 12.700 mm (-0.013/-0.208) (0.500 in.)
Thickness (T): 4.763 mm (+0.076/+0.215) (0.188 in.)
(d2): 4.763 mm (-0.025/-0.202) (0.188 in.)
OD (D2): 12.700 mm (-0.025/-0.202) (0.500 in.)
Dynamic Load Capacity: 17 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $12.58 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$11.44 Each ($12.58 incl GST). (Total cost $11.44 )
About 4 to 5 weeks
$5.77 Each ($6.35 incl GST). (Total cost $577.00 )
About 4 to 5 weeks
BULK PACK
$577.00 for 100 Units ($634.70 incl GST). (Total cost $577.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 6.350 mm

Part Number: T-0064-0141-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $12.95
Online Price: $12.58

About 4 to 5 weeks after ordered

Part Number
T-0064-0141-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 6.350 mm (+ 0.076 / +0.203) (0.250 in.)
OD (D1): 14.288 mm (-0.013/-0.208) (0.563 in.)
Thickness (T): 4.763 mm (+0.076/+0.215) (0.188 in.)
(d2): 6.350 mm (-0.025/-0.202) (0.250 in.)
OD (D2): 14.288 mm (-0.025/-0.202) (0.563 in.)
Dynamic Load Capacity: 20 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $12.58 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$11.44 Each ($12.58 incl GST). (Total cost $11.44 )
About 4 to 5 weeks
$5.95 Each ($6.55 incl GST). (Total cost $595.00 )
About 4 to 5 weeks
BULK PACK
$595.00 for 100 Units ($654.50 incl GST). (Total cost $595.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 8.000 mm

Part Number: T-0080-0160-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $15.95
Online Price: $15.11

About 4 to 5 weeks after ordered

Part Number
T-0080-0160-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 8.000 mm (+ 0.08 / +0.20) (0.315 in.)
OD (D1): 16.000 mm (-0.040/-0.220) (0.630 in.)
Thickness (T): 5.000 mm (+0.020/-0.180) (0.197 in.)
(d2): 8.000 mm (-0.025/-0.202) (0.315 in.)
OD (D2): 16.000 mm (-0.025/-0.202) (0.630 in.)
Dynamic Load Capacity: 22 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $15.11 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$13.74 Each ($15.11 incl GST). (Total cost $13.74 )
About 4 to 5 weeks
$6.41 Each ($7.05 incl GST). (Total cost $641.00 )
About 4 to 5 weeks
BULK PACK
$641.00 for 100 Units ($705.10 incl GST). (Total cost $641.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 9.525 mm

Part Number: T-0095-0204-F-S440-NY

 *** IN STOCK NOW ***

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

IN STOCK NOW

Retail Price: $14.95
Online Price: $13.85

Qty Available Now: 4

More than 4:
4 to 5 weeks

Part Number
T-0095-0204-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 9.525 mm (+ 0.076 / +0.203) (0.375 in.)
OD (D1): 20.638 mm (-0.013/-0.208) (0.813 in.)
Thickness (T): 6.350 mm (+0.076/-0.127) (0.250 in.)
(d2): 9.525 mm (-0.025/-0.202) (0.375 in.)
OD (D2): 20.638 mm (-0.025/-0.202) (0.813 in.)
Dynamic Load Capacity: 25 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $13.85 incl. GST Each
(Online price only)

Change the quantity and click the button. 4 available now. If you order more than 4, the item will be placed on backorder.

$12.59 Each ($13.85 incl GST). (Total cost $12.59 )
4 Available
$6.68 Each ($7.35 incl GST). (Total cost $668.00 )
About 4 to 5 weeks
BULK PACK
$668.00 for 100 Units ($734.80 incl GST). (Total cost $668.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 11.112 mm

Part Number: T-0111-0220-F-S440-NY

 *** IN STOCK NOW ***

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

IN STOCK NOW

Retail Price: $15.95
Online Price: $13.85

Qty Available Now: 1

More than 1:
4 to 5 weeks

Part Number
T-0111-0220-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 11.112 mm (+ 0.088 / +0.215) (0.437 in.)
OD (D1): 22.225 mm (-0.013/-0.208) (0.875 in.)
Thickness (T): 6.350 mm (+0.076/-0.127) (0.250 in.)
(d2): 11.113 mm (-0.025/-0.202) (0.438 in.)
OD (D2): 22.225 mm (-0.025/-0.202) (0.875 in.)
Dynamic Load Capacity: 29 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $13.85 incl. GST Each
(Online price only)

Change the quantity and click the button. 1 available now. If you order more than 1, the item will be placed on backorder.

$12.59 Each ($13.85 incl GST). (Total cost $12.59 )
1 Available
$7.05 Each ($7.76 incl GST). (Total cost $705.00 )
About 4 to 5 weeks
BULK PACK
$705.00 for 100 Units ($775.50 incl GST). (Total cost $705.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 12.700 mm

Part Number: T-0127-0236-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $15.95
Online Price: $15.11

About 4 to 5 weeks after ordered

Part Number
T-0127-0236-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 12.700 mm (+ 0.076 / +0.203) (0.500 in.)
OD (D1): 23.813 mm (-0.013/-0.208) (0.938 in.)
Thickness (T): 6.350 mm (+0.076/-0.127) (0.250 in.)
(d2): 12.700 mm (-0.025/-0.202) (0.500 in.)
OD (D2): 23.813 mm (-0.025/-0.202) (0.938 in.)
Dynamic Load Capacity: 33 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $15.11 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$13.74 Each ($15.11 incl GST). (Total cost $13.74 )
About 4 to 5 weeks
$7.41 Each ($8.15 incl GST). (Total cost $741.00 )
About 4 to 5 weeks
BULK PACK
$741.00 for 100 Units ($815.10 incl GST). (Total cost $741.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 14.288 mm

Part Number: T-0143-0252-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $16.95
Online Price: $16.38

About 4 to 5 weeks after ordered

Part Number
T-0143-0252-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 14.288 mm (+ 0.089 / +0.216) (0.563 in.)
OD (D1): 25.400 mm (-0.013/-0.208) (1.000 in.)
Thickness (T): 6.350 mm (+0.076/-0.127) (0.250 in.)
(d2): 14.288 mm (-0.025/-0.202) (0.563 in.)
OD (D2): 25.400 mm (-0.025/-0.202) (1.000 in.)
Dynamic Load Capacity: 37 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $16.38 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$14.89 Each ($16.38 incl GST). (Total cost $14.89 )
About 4 to 5 weeks
$8.05 Each ($8.86 incl GST). (Total cost $805.00 )
About 4 to 5 weeks
BULK PACK
$805.00 for 100 Units ($885.50 incl GST). (Total cost $805.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 15.875 mm

Part Number: T-0159-0283-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $20.30
Online Price: $20.17

About 4 to 5 weeks after ordered

Part Number
T-0159-0283-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 15.875 mm (+ 0.076 / +0.203) (0.625 in.)
OD (D1): 28.575 mm (-0.013/-0.208) (1.125 in.)
Thickness (T): 8.731 mm (+0.076/-0.127) (0.344 in.)
(d2): 15.875 mm (-0.025/-0.202) (0.625 in.)
OD (D2): 28.575 mm (-0.025/-0.202) (1.125 in.)
Dynamic Load Capacity: 40 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $20.17 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$18.34 Each ($20.17 incl GST). (Total cost $18.34 )
About 4 to 5 weeks
$8.59 Each ($9.45 incl GST). (Total cost $859.00 )
About 4 to 5 weeks
BULK PACK
$859.00 for 100 Units ($944.90 incl GST). (Total cost $859.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 17.463 mm

Part Number: T-0175-0299-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $21.84
Online Price: $21.44

About 4 to 5 weeks after ordered

Part Number
T-0175-0299-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 17.463 mm (+ 0.088 / +0.262) (0.688 in.)
OD (D1): 30.175 mm (-0.013/-0.208) (1.188 in.)
Thickness (T): 8.731 mm (+0.076/-0.127) (0.344 in.)
(d2): 17.463 mm (-0.025/-0.202) (0.688 in.)
OD (D2): 30.163 mm (-0.025/-0.202) (1.188 in.)
Dynamic Load Capacity: 47 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $21.44 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$19.49 Each ($21.44 incl GST). (Total cost $19.49 )
About 4 to 5 weeks
$11.05 Each ($12.16 incl GST). (Total cost $1105.00 )
About 4 to 5 weeks
BULK PACK
$1105.00 for 100 Units ($1215.50 incl GST). (Total cost $1105.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 19.050 mm

Part Number: T-0191-0315-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $22.61
Online Price: $22.70

About 4 to 5 weeks after ordered

Part Number
T-0191-0315-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 19.050 mm (+ 0.076 / +0.263) (0.750 in.)
OD (D1): 31.750 mm (-0.013/-0.208) (1.250 in.)
Thickness (T): 8.731 mm (+0.076/-0.127) (0.344 in.)
(d2): 19.050 mm (-0.025/-0.202) (0.750 in.)
OD (D2): 31.750 mm (-0.025/-0.202) (1.250 in.)
Dynamic Load Capacity: 54 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $22.70 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$20.64 Each ($22.70 incl GST). (Total cost $20.64 )
About 4 to 5 weeks
$11.50 Each ($12.65 incl GST). (Total cost $1150.00 )
About 4 to 5 weeks
BULK PACK
$1150.00 for 100 Units ($1265.00 incl GST). (Total cost $1150.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 20.638 mm

Part Number: T-0206-0331-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $24.26
Online Price: $25.23

About 4 to 5 weeks after ordered

Part Number
T-0206-0331-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 20.638 mm (+ 0.088 / +0.262) (0.813 in.)
OD (D1): 33.338 mm (-0.013/-0.208) (1.313 in.)
Thickness (T): 8.731 mm (+0.076/-0.127) (0.344 in.)
(d2): 20.638 mm (-0.025/-0.202) (0.813 in.)
OD (D2): 33.338 mm (-0.025/-0.202) (1.313 in.)
Dynamic Load Capacity: 60 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $25.23 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$22.94 Each ($25.23 incl GST). (Total cost $22.94 )
About 4 to 5 weeks
$12.59 Each ($13.85 incl GST). (Total cost $1259.00 )
About 4 to 5 weeks
BULK PACK
$1259.00 for 100 Units ($1384.90 incl GST). (Total cost $1259.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 22.225 mm

Part Number: T-0222-0347-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $25.36
Online Price: $25.37

About 4 to 5 weeks after ordered

Part Number
T-0222-0347-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 22.225 mm (+ 0.076 / +0.263) (0.875 in.)
OD (D1): 34.925 mm (-0.013/-0.208) (1.375 in.)
Thickness (T): 8.731 mm (+0.076/-0.127) (0.344 in.)
(d2): 22.225 mm (-0.025/-0.202) (0.875 in.)
OD (D2): 34.925 mm (-0.025/-0.202) (1.375 in.)
Dynamic Load Capacity: 67 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $25.37 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$23.06 Each ($25.37 incl GST). (Total cost $23.06 )
About 4 to 5 weeks
$13.23 Each ($14.55 incl GST). (Total cost $1323.00 )
About 4 to 5 weeks
BULK PACK
$1323.00 for 100 Units ($1455.30 incl GST). (Total cost $1323.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 23.813 mm

Part Number: T-0238-0394-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $32.40
Online Price: $33.46

About 4 to 5 weeks after ordered

Part Number
T-0238-0394-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 23.813 mm (+ 0.088 / +0.262) (0.938 in.)
OD (D1): 36.688 mm (-0.013/-0.208) (1.444 in.)
Thickness (T): 11.113 mm (+0.360/-0.240) (0.438 in.)
(d2): 23.813 mm (-0.025/-0.202) (0.938 in.)
OD (D2): 39.688 mm (-0.025/-0.202) (1.563 in.)
Dynamic Load Capacity: 75 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $33.46 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$30.42 Each ($33.46 incl GST). (Total cost $30.42 )
About 4 to 5 weeks
$17.68 Each ($19.45 incl GST). (Total cost $1768.00 )
About 4 to 5 weeks
BULK PACK
$1768.00 for 100 Units ($1944.80 incl GST). (Total cost $1768.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 25.400 mm

Part Number: T-0254-0410-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $33.61
Online Price: $34.85

About 4 to 5 weeks after ordered

Part Number
T-0254-0410-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 25.400 mm (+ 0.076 / +0.263) (1.000 in.)
OD (D1): 41.275 mm (-0.013/-0.208) (1.625 in.)
Thickness (T): 11.113 mm (+0.360/-0.240) (0.438 in.)
(d2): 25.400 mm (-0.025/-0.202) (1.000 in.)
OD (D2): 41.275 mm (-0.025/-0.202) (1.625 in.)
Dynamic Load Capacity: 83 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $34.85 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$31.68 Each ($34.85 incl GST). (Total cost $31.68 )
About 4 to 5 weeks
$18.50 Each ($20.35 incl GST). (Total cost $1850.00 )
About 4 to 5 weeks
BULK PACK
$1850.00 for 100 Units ($2035.00 incl GST). (Total cost $1850.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 28.575 mm

Part Number: T-0286-0441-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $37.12
Online Price: $38.90

About 4 to 5 weeks after ordered

Part Number
T-0286-0441-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 28.575 mm (+ 0.076 / +0.263) (1.125 in.)
OD (D1): 44.450 mm (-0.013/-0.208) (1.750 in.)
Thickness (T): 11.113 mm (+0.360/-0.240) (0.438 in.)
(d2): 28.575 mm (-0.025/-0.202) (1.125 in.)
OD (D2): 44.450 mm (-0.025/-0.202) (1.750 in.)
Dynamic Load Capacity: 99 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $38.90 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$35.36 Each ($38.90 incl GST). (Total cost $35.36 )
About 4 to 5 weeks
$20.86 Each ($22.95 incl GST). (Total cost $2086.00 )
About 4 to 5 weeks
BULK PACK
$2086.00 for 100 Units ($2294.60 incl GST). (Total cost $2086.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


Part Number: T-0318-0473-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is close in appearance
to actual product.

Retail Price: $41.30
Online Price: $43.70

About 4 to 5 weeks after ordered

Part Number
T-0318-0473-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 28.575 mm (+ 0.076 / +0.263) (1.125 in.)
OD (D1): 47.625 mm (-0.013/-0.208) (1.875 in.)
Thickness (T): 11.113 mm (+0.360/-0.240) (0.438 in.)
(d2): 28.575 mm (-0.025/-0.202) (1.125 in.)
OD (D2): 47.625 mm (-0.025/-0.202) (1.875 in.)
Dynamic Load Capacity: 116 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $43.70 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$39.73 Each ($43.70 incl GST). (Total cost $39.73 )
About 4 to 5 weeks
$23.41 Each ($25.75 incl GST). (Total cost $2341.00 )
About 4 to 5 weeks
BULK PACK
$2341.00 for 100 Units ($2575.10 incl GST). (Total cost $2341.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


"Usual Delivery" shown is an indication only and subject to confirmation.
E-mails to confirm stock status will usually receive a reply within 4 business hours.



Nominal Shaft Size (d1): 38.100 mm

Part Number: T-0381-0540-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Photo is indicative only.

Retail Price: $45.60
Online Price: $48.64

About 4 to 5 weeks after ordered

Part Number
T-0381-0540-F-S440-NY

Bearings - Thrust - Ball - Flat - Stainless Steel
Nominal Shaft Size (d1): 38.100 mm (+ 0.076 / +0.263) (1.500 in.)
OD (D1): 53.975 mm (-0.013/-0.208) (2.125 in.)
Thickness (T): 11.113 mm (+0.360/-0.240) (0.438 in.)
(d2): 38.100 mm (-0.025/-0.202) (1.500 in.)
OD (D2): 53.975 mm (-0.025/-0.202) (2.125 in.)
Dynamic Load Capacity: 86 kgf
Material (Races and Balls): 400 Series Stainless Steel

Cage Type: Moulded Nylon

Online Price $48.64 incl. GST Each
(Online price only)

Change the quantity and click the button. The item will be placed on backorder. About 4 to 5 weeks.

$44.22 Each ($48.64 incl GST). (Total cost $44.22 )
About 4 to 5 weeks
$26.86 Each ($29.55 incl GST). (Total cost $2686.00 )
About 4 to 5 weeks
BULK PACK
$2686.00 for 100 Units ($2954.60 incl GST). (Total cost $2686.00 )
About 4 to 5 weeks

(GST tax will only apply if the order is delivered to an Australian address)

Pricing is in AUD ($). Change pricing using the selector at the top right of any page.


This is page 1 of 1 showing items 1 to 18 of 18 items.



Include all:
Ball Thrust Bearings


View a PDF catalogue of this category

or scroll up for prices and availabilities

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122787 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122787 products in 2707 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.