Yoke Ends Categories
Yoke Ends - Blank
Linkage Connectors with blank ends - no hole
Drop forged steel machined to SAE standards. Also see clevis joints. This category may be available in the new MBA online store at Yoke Ends - Blank.
Related Information:
There is also a good range of Yoke Ends - Blank on the Small Parts and Bearings website.
Yoke Ends - Threaded
Linkage Connectors
Drop forged steel machined to SAE standards. Also see clevis joints. This category may be available in the new MBA online store at Yoke Ends - Threaded.
Related Information:
There is also a good range of Yoke Ends - Threaded on the Small Parts and Bearings website.
Rollers - Yoke - Cam - Urethane Coated
Urethane tyred cam yoke rollers for noise reduction, reduced wear and non marking. 80 Shore A hardness.
Polycoated shore 80A cast urethane cover. This category may be available in the new MBA online store at Rollers - Yoke - Cam - Urethane Coated.
Related Information:
There is also a good range of Rollers - Yoke - Cam - Urethane Coated on the Small Parts and Bearings website.
Rollers - Yoke - Crown
This category may be available in the new MBA online store at Rollers - Yoke - Crown.
There is also a good range of Rollers - Yoke - Crown on the Small Parts and Bearings website.
Rollers - Yoke - Self Lubricating
This category may be available in the new MBA online store at Rollers - Yoke - Self Lubricating.
There is also a good range of Rollers - Yoke - Self Lubricating on the Small Parts and Bearings website.
Rollers - Yoke - Standard
This category may be available in the new MBA online store at Rollers - Yoke - Standard.
There is also a good range of Rollers - Yoke - Standard on the Small Parts and Bearings website.
Rod Ends - Plastic Female
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Plastic Female.
There is also a good range of Rod Ends - Plastic Female on the Small Parts and Bearings website.
Rod Ends - Plastic Male
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Plastic Male.
There is also a good range of Rod Ends - Plastic Male on the Small Parts and Bearings website.
Rod Ends - Steel - PTFE Lined - Tempered Steel Female
Imperial and Metric. Forged tempered steel. Rolled thread. Surface galvanised. Also known as Heim Joints. Nylon - ptfe - glass compound race.
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tempered Steel Female.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tempered Steel Female on the Small Parts and Bearings website.
Rod Ends - Steel - PTFE Lined - Tempered Steel Male
Imperial and Metric. Forged tempered steel. Rolled thread. Surface galvanised. Also known as Heim Joints. Nylon - ptfe - glass compound race.
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tempered Steel Male.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tempered Steel Male on the Small Parts and Bearings website.
Rod Ends - Steel - PTFE Lined - Tight Fit Female
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tight Fit Female.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit Female on the Small Parts and Bearings website.
Rod Ends - Steel - PTFE Lined - Tight Fit Male
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tight Fit Male.
There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit Male on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway Female
Also known as Heim Joints
There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway Female on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway Male
Also known as Heim Joints
There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway Male on the Small Parts and Bearings website.
Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined Female
Also known as Heim Joints
Dimensions not shown are available on request.
There is also a good range of Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined Female on the Small Parts and Bearings website.
Rod Ends - Stainless Steel - Bronze Lined Male
Also known as Heim Joints
Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK. This category may be available in the new MBA online store at Rod Ends - Stainless Steel - Bronze Lined Male.
There is also a good range of Rod Ends - Stainless Steel - Bronze Lined Male on the Small Parts and Bearings website.
Rod Ends - Steel - Stamped Female
Economy stamped style combines high strength with low cost. Also known as Heim Joints
Made from low carbon steel and plated for corrosion resistance. Ball is case hardened. This category may be available in the new MBA online store at Rod Ends - Steel - Stamped Female.
There is also a good range of Rod Ends - Steel - Stamped Female on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined Female
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined Female.
There is also a good range of Rod Ends - Steel - Bronze Lined Female on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Female
Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination. Also known as Heim Joints
Maintenance free and no lubrication necessary. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Female.
There is also a good range of Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Female on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Male
Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination.
Maintenance free and no lubrication necessary. Also known as Heim Joints. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Male.
There is also a good range of Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Male on the Small Parts and Bearings website.
Rod Ends - Steel - Bronze Lined Male
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined Male.
There is also a good range of Rod Ends - Steel - Bronze Lined Male on the Small Parts and Bearings website.
Rod Ends - Steel - Nylon Raceway Female
Also known as Heim Joints
This category may be available in the new MBA online store at Rod Ends - Steel - Nylon Raceway Female.
There is also a good range of Rod Ends - Steel - Nylon Raceway Female on the Small Parts and Bearings website.
Rod Ends - Steel - Nylon Raceway Male
Also known as Heim Joints
This category may be available in the new MBA online store at Rod Ends - Steel - Nylon Raceway Male.
There is also a good range of Rod Ends - Steel - Nylon Raceway Male on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - Nylon Seat Female
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated. This category may be available in the new MBA online store at Rod Ends - Steel - Studded - Nylon Seat Female.
There is also a good range of Rod Ends - Steel - Studded - Nylon Seat Female on the Small Parts and Bearings website.
Gas Springs - End Fittings
This category may be available in the new MBA online store at Gas Springs - End Fittings.
There is also a good range of Gas Springs - End Fittings on the Small Parts and Bearings website.
Pins - Pull - Threaded End - Aluminium and Steel
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.
Related Information:
There is also a good range of Pins - Pull - Threaded End - Aluminium and Steel on the Small Parts and Bearings website.
Pins - Pull - Threaded End - Stainless Steel
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.
Related Information:
There is also a good range of Pins - Pull - Threaded End - Stainless Steel on the Small Parts and Bearings website.
Pins - Pull - Threaded End - Steel
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.
Related Information:
There is also a good range of Pins - Pull - Threaded End - Steel on the Small Parts and Bearings website.
Snap Buttons - Double End
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at Snap Buttons - Double End.
There is also a good range of Snap Buttons - Double End on the Small Parts and Bearings website.
Snap Buttons - Single End - Dog Leg
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at Snap Buttons - Single End - Dog Leg.
There is also a good range of Snap Buttons - Single End - Dog Leg on the Small Parts and Bearings website.
Snap Buttons - Single End - Spring Leg
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at Snap Buttons - Single End - Spring Leg.
There is also a good range of Snap Buttons - Single End - Spring Leg on the Small Parts and Bearings website.
Shafts - Flexible - Coupling Ends - Open - Mild Steel
Flexible shafting with coupling ends ready to attach to a fixed shaft.
1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm. This category may be available in the new MBA online store at Shafts - Flexible - Coupling Ends - Open - Mild Steel.
Related Information:
There is also a good range of Shafts - Flexible - Coupling Ends - Open - Mild Steel on the Small Parts and Bearings website.
Gas Springs - Assembly End Fittings
This category may be available in the new MBA online store at Gas Springs - Assembly End Fittings.
There is also a good range of Gas Springs - Assembly End Fittings on the Small Parts and Bearings website.
Shaftloc-tm Sleeves - Single Ended
Simple effective way to lock components onto shafts.
416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened. This category may be available in the new MBA online store at Shaftloc-tm Sleeves - Single Ended.
Related Information:
There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.
Pins - Ball Lock - Threaded End - Stainless Steel
One end threaded so you can attach your own handle or knob. 303 Stainless Steel.
Positive lock detent pins. 300 Grade Stainless Components. 440C Stainless Balls. This category may be available in the new MBA online store at Pins - Ball Lock - Threaded End - Stainless Steel.
Related Information:
There is also a good range of Pins - Ball Lock - Threaded End - Stainless Steel on the Small Parts and Bearings website.
Pins - Dowel - Standard - Chamfered End - Plastic
Plastic Dowel Pins - Based on DIN6325 or ISO2338
Also known as parallel pins. This category may be available in the new MBA online store at Pins - Dowel - Standard - Chamfered End - Plastic.
Related Information:
There is also a good range of Pins - Dowel - Standard - Chamfered End - Plastic on the Small Parts and Bearings website.
Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless
Precision Dowel Pins - 303/304 Grade Stainless - Based on DIN6325, ISO2338, ISO 8734
Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins. This category may be available in the new MBA online store at Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless.
Related Information:
There is also a good range of Pins - Dowel - Standard - Chamfered Ends - 303-304 Stainless on the Small Parts and Bearings website.
Pins - Dowel - Standard - Chamfered Ends - 316 Stainless
Precision Dowel Pins - 316 Grade - Based on DIN6325, ISO2338, ISO 8734
Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins. This category may be available in the new MBA online store at Pins - Dowel - Standard - Chamfered Ends - 316 Stainless.
Related Information:
There is also a good range of Pins - Dowel - Standard - Chamfered Ends - 316 Stainless on the Small Parts and Bearings website.
Pins - Dowel - Standard - Chamfered Ends - 416 Stainless
Precision Dowel Pins - 416 Grade - Based on DIN6325 or ISO2338
Also known as parallel pins. This category may be available in the new MBA online store at Pins - Dowel - Standard - Chamfered Ends - 416 Stainless.
Related Information:
There is also a good range of Pins - Dowel - Standard - Chamfered Ends - 416 Stainless on the Small Parts and Bearings website.
Pins - Dowel - Standard - Chamfered Ends - Carbon Steel
Precision Dowel Pins - Based on DIN6325, ISO2338
Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins. This category may be available in the new MBA online store at Pins - Dowel - Standard - Chamfered Ends - Carbon Steel.
Related Information:
There is also a good range of Pins - Dowel - Standard - Chamfered Ends - Carbon Steel on the Small Parts and Bearings website.
Pins - Dowel - Standard - Rounded Ends - 303-304 Stainless
Precision Dowel Pins - 303/304 Grade Stainless- Based on DIN7
Rounded end dowel pins are measured from the start of the edge rounding. This allows the pin to completely fill the hole after you grind off the rounded end. Diameter tolerances are m6. Also known as parallel pins. This category may be available in the new MBA online store at Pins - Dowel - Standard - Rounded Ends - 303-304 Stainless.
Related Information:
There is also a good range of Pins - Dowel - Standard - Rounded Ends - 303-304 Stainless on the Small Parts and Bearings website.
Pins - Dowel - Standard - Rounded Ends - 316 Stainless
Precision Dowel Pins - 316 Grade - Based on DIN7
Diameter tolerances are m6. Also known as parallel pins. This category may be available in the new MBA online store at Pins - Dowel - Standard - Rounded Ends - 316 Stainless.
Related Information:
There is also a good range of Pins - Dowel - Standard - Rounded Ends - 316 Stainless on the Small Parts and Bearings website.
Pins - Dowel - Standard - Rounded Ends - Unhardened Steel
Precision Dowel Pins - Based on DIN7
Diameter tolerances are m6. Also known as parallel pins. This category may be available in the new MBA online store at Pins - Dowel - Standard - Rounded Ends - Unhardened Steel.
Related Information:
There is also a good range of Pins - Dowel - Standard - Rounded Ends - Unhardened Steel on the Small Parts and Bearings website.
Pins - Dowel - Stepped - Chamfered Ends - 440 Stainless Steel
Precision Dowel Pins with a Step
This category may be available in the new MBA online store at Pins - Dowel - Stepped - Chamfered Ends - 440 Stainless Steel.
Related Information:
There is also a good range of Pins - Dowel - Stepped - Chamfered Ends - 440 Stainless Steel on the Small Parts and Bearings website.
Pins - Dowel - Stepped - Chamfered Ends - Carbon Steel
Precision Dowel Pins with a Step
This category may be available in the new MBA online store at Pins - Dowel - Stepped - Chamfered Ends - Carbon Steel.
Related Information:
There is also a good range of Pins - Dowel - Stepped - Chamfered Ends - Carbon Steel on the Small Parts and Bearings website.
Pins - Dowel - Stepped - Chamfered Ends - Extractable - 440 Stainless Steel
Precision Extractable Dowel Pins with a Step
Related Information:
There is also a good range of Pins - Dowel - Stepped - Chamfered Ends - Extractable - 440 Stainless Steel on the Small Parts and Bearings website.
Pins - Dowel - Stepped - Chamfered Ends - Extractable - Carbon Steel
Precision Extractable Dowel Pins with a Step
Related Information:
There is also a good range of Pins - Dowel - Stepped - Chamfered Ends - Extractable - Carbon Steel on the Small Parts and Bearings website.
Socket Set Screws - Magnetic End - Carbon Steel
Magnetic End grub screws
This category may be available in the new MBA online store at Socket Set Screws - Magnetic End - Carbon Steel.
Related Information:
There is also a good range of Socket Set Screws - Magnetic End - Carbon Steel on the Small Parts and Bearings website.
Gears - Spur - 72DP - Differential End - Aluminium
To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.
72 Diametrical Pitch. Approx 1.11mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 72DP - Differential End - Aluminium.
There is also a good range of Gears - Spur - 72DP - Differential End - Aluminium on the Small Parts and Bearings website.
E-Clips - Bowed
For end play take up.
Thickness tolerance +/- 0.025. This category may be available in the new MBA online store at E-Clips - Bowed.
There is also a good range of E-Clips - Bowed on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
