Wear Strips Categories
Wearstrips - Plain
Self-Lube wearstrips provide effective and economical means of controlling and guiding linear motions, especially in large load applications.
Made of solid aluminum bronze. Furnished semi-finished and are able to be cut to size and finished.
There is also a good range of Wearstrips - Plain on the Small Parts and Bearings website.
Wearstrips - Graphite Plug
Self-Lube wearstrips provide effective and economical means of controlling and guiding linear motions, especially in large load applications.
Made of solid aluminum bronze with self-lubricating graphite plugs. Furnished semi-finished and are able to be cut to size and finished. Plugs are 25.4mm centres. Drill mounting holes either between or through graphite plugs. Before drilling break out graphite.
There is also a good range of Wearstrips - Graphite Plug on the Small Parts and Bearings website.
Strip - Brass
Thin Brass Strip
Related Information:
There is also a good range of Strip - Brass on the Small Parts and Bearings website.
Strip - Soft Metal Packs
For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.
300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.
There is also a good range of Strip - Soft Metal Packs on the Small Parts and Bearings website.
Strip - Spring Steel
Hundreds of uses.
Hardened and tempered spring steel strip. Note that the width of this strip may vary up to a few mm as it is guillotine cut from strip. If you require a closer tolerance on the strip width please contact us prior to ordering.
There is also a good range of Strip - Spring Steel on the Small Parts and Bearings website.
Strip - Stainless Steel
430 Grade stainless steel strip
There is also a good range of Strip - Stainless Steel on the Small Parts and Bearings website.
Mounts - Vibro-Insulator Strips
Vibration dampening
Related Information:
There is also a good range of Mounts - Vibro-Insulator Strips on the Small Parts and Bearings website.
Rectangular Bar - Aluminium
Thin and thick Aluminum strip and rectangular profiles
Small sizes may not be perfectly straight.
There is also a good range of Rectangular Bar - Aluminium on the Small Parts and Bearings website.
Balls - Ceramic - Zirconia
Outstanding wear resistance. Excellent thermal and chemical resistance.
Grades shown are AFBMA / ISO3290-1.
Related Information:
There is also a good range of Balls - Ceramic - Zirconia on the Small Parts and Bearings website.
Balls - Ceramic - Silicon Nitride
Outstanding wear resistance. Good thermal and chemical resistance.
High hardness. Grades shown are AFBMA / ISO3290-1. High strength over a wide temperature range. High fracture toughness. Outstanding wear resistance. Good thermal and chemical resistance.
Related Information:
There is also a good range of Balls - Ceramic - Silicon Nitride on the Small Parts and Bearings website.
Bushes - Steel - DP4 - Split - Flanged
Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.
Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free. Speed Limit in oil 3 metres surface speed per second.
Related Information:
There is also a good range of Bushes - Steel - DP4 - Split - Flanged on the Small Parts and Bearings website.
Bushes - Steel - DP4 - Split - Unflanged
Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.
Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free. Speed Limit in oil 3 metres surface speed per second.
Related Information:
There is also a good range of Bushes - Steel - DP4 - Split - Unflanged on the Small Parts and Bearings website.
Balls - Ceramic - Ruby - Synthetic
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Specific Gravity: 3.98.
Related Information:
There is also a good range of Balls - Ceramic - Ruby - Synthetic on the Small Parts and Bearings website.
Balls - Ceramic - Sapphire - Synthetic
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Specific Gravity: 3.98. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Transparent (refractive index 1.76).
Related Information:
There is also a good range of Balls - Ceramic - Sapphire - Synthetic on the Small Parts and Bearings website.
Balls - Tungsten Carbide
Extreme hardness and wear resistance.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Precision Grade: Grade 25. Hardness: Rockwell A: 91.5 (Approx 77 Rockwell C). Extreme hardness and wear resistance. Specific Gravity: 14.95.
Related Information:
There is also a good range of Balls - Tungsten Carbide on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur J - Flanged
Low Wear - Dry Running - Vibration Dampening - Chemical Resistance.
Specific Gravity 1.49 g/cm3. Operating Temp 120 C short term / 90 C long term. Tensile Strength at 20 oC = 73 Mpa. Hardness 74 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur J - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur J - Unflanged
Low Wear - Dry Running - Vibration Dampening - Chemical Resistance.
Specific Gravity 1.49 g/cm3. Operating Temp 120 C short term / 90 C long term. Tensile Strength at 20 oC = 73 Mpa. Hardness 74 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur J - Unflanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur Q - Flanged
Excellent wear resistance under high load. Resistant to dirt.
Specific Gravity 1.40 g/cm3. Operating Temp 155 C short term / 135 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 83 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur Q - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur Q - Unflanged
Excellent wear resistance under high load. Resistant to dirt.
Specific Gravity 1.40 g/cm3. Operating Temp 155 C short term / 135 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 83 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur Q - Unflanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur P - Flanged
Low water absorption. Low wear. Hgh load.
Specific Gravity 1.47 g/cm3. Operating Temp 200 C short term / 130 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 75 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur P - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur P - Unflanged
Low water absorption. Low wear. Hgh load.
Specific Gravity 1.47 g/cm3. Operating Temp 200 C short term / 130 C long term. Tensile Strength at 20 oC = 120 Mpa. Hardness 75 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur P - Unflanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur W300 - Flanged
Low co-efficient of friction. High wear resistance. Chemical resistant.
Specific Gravity 1.24 g/cm3. Operating Temp 180 C short term / 90 C long term. Tensile Strength at 20 oC = 125 Mpa. Hardness 77 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur W300 - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur W300 - Unflanged
Low co-efficient of friction. High wear resistance. Chemical resistant.
Specific Gravity 1.24 g/cm3. Operating Temp 180 C short term / 90 C long term. Tensile Strength at 20 oC = 125 Mpa. Hardness 77 Shore D (DIN53505). Bushing bore tolerance is E10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur W300 - Unflanged on the Small Parts and Bearings website.
Rollers - Yoke - Cam
Urethane tyred cam yoke rollers for noise reduction, reduced wear and non marking
Polycoated shore 80A cast urethane cover.
Related Information:
There is also a good range of Rollers - Yoke - Cam on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur H370 - Flanged
Underwater. High Temp. Chemical Resistant. High mechanical loading and wear resistance.
Specific Gravity 1.60 g/cm3. Operating Temp 240 C short term / 200 C long term. Tensile Strength at 20 oC = 135 Mpa. Hardness 82 Shore D (DIN53505). Bushing bore tolerance is F10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur H370 - Flanged on the Small Parts and Bearings website.
Bushes - Plastic - Iglidur H370 - Unflanged
Underwater. High Temp. Chemical Resistant. High mechanical loading and wear resistance.
Specific Gravity 1.60 g/cm3. Operating Temp 240 C short term / 200 C long term. Tensile Strength at 20 oC = 135 Mpa. Hardness 82 Shore D (DIN53505). Bushing bore tolerance is F10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.
Related Information:
There is also a good range of Bushes - Plastic - Iglidur H370 - Unflanged on the Small Parts and Bearings website.
Cam Followers - Roller Type - Urethane Covered
Urethane tyred cam followers for noise reduction, reduced wear and non marking
There is also a good range of Cam Followers - Roller Type - Urethane Covered on the Small Parts and Bearings website.
Tool Steel - 496 Oil Hardening - Flat Stock
General purpose tool steel with good wear resistance, durability and machinability
Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).
There is also a good range of Tool Steel - 496 Oil Hardening - Flat Stock on the Small Parts and Bearings website.
Shim and Foil - Brass
Precision brass shim sheet. From very thin foil to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Includes sheets and rolls. See Brass - Strip for thin strips.
Related Information:
There is also a good range of Shim and Foil - Brass on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - Quick Disconnect - Female
Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.
There is also a good range of Rod Ends - Steel - Studded - Quick Disconnect - Female on the Small Parts and Bearings website.
Housings - Bearing - Flanged - Square - W300
With integral self aligning plain bearing.
Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.
There is also a good range of Housings - Bearing - Flanged - Square - W300 on the Small Parts and Bearings website.
Bushings - Tension
Like a heavy duty roll pin.
Made of a high carbon spring steel with high elasticity, resilience and wear characteristics. Designed to replace solid steel tubular and case hardened bushings because they are close tolerance, self-retaining and through hard. Insertion can be easily accomplished with a hammer and drift. Ideal for high load/low-speed operation in articulating or continuous applications.
There is also a good range of Bushings - Tension on the Small Parts and Bearings website.
Housings - Bearing - Flanged - 2 Bolt Hole - W300
With integral self aligning plain bearing.
Housing: Igumid G. Ball: Highly wear resistant Iglidur W300.
There is also a good range of Housings - Bearing - Flanged - 2 Bolt Hole - W300 on the Small Parts and Bearings website.
Ball Buttons
Also known as striker bushings or ball plunger detents. Use with ball or bolt spring plungers for a hard wearing contact area.
Burnished ground hardened steel.
There is also a good range of Ball Buttons on the Small Parts and Bearings website.
Mounts - Leveling - Stud Type - Gold Chromate - Imperial
Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
There is also a good range of Mounts - Leveling - Stud Type - Gold Chromate - Imperial on the Small Parts and Bearings website.
Mounts - Leveling - Stud Type - Gold Chromate - Metric
Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
There is also a good range of Mounts - Leveling - Stud Type - Gold Chromate - Metric on the Small Parts and Bearings website.
Mounts - Leveling - Stud Type - Nickel Plated - Imperial
Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
There is also a good range of Mounts - Leveling - Stud Type - Nickel Plated - Imperial on the Small Parts and Bearings website.
Mounts - Leveling - Stud Type - Nickel Plated - Metric
Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
There is also a good range of Mounts - Leveling - Stud Type - Nickel Plated - Metric on the Small Parts and Bearings website.
Washers - Self Aligning - Sets - Plastic
Spherical Seat Washers
Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.
Related Information:
There is also a good range of Washers - Self Aligning - Sets - Plastic on the Small Parts and Bearings website.
Bushes - Plastic - Clip - Double Flanged
For use with sheet metal. Used as a light duty split bearing.
Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight. M250 Polymer minus 40 oC to 80 oC (minus 40 Deg F to 176 Deg F).
Related Information:
There is also a good range of Bushes - Plastic - Clip - Double Flanged on the Small Parts and Bearings website.
Springs - Constant Force
301 Stainless Steel
Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.
Related Information:
There is also a good range of Springs - Constant Force on the Small Parts and Bearings website.
Drylin Sliding Bearings
Linear sliding motion. Use with Drylin Aluminium Shafts.
Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60oC to +100oC (increased wear when used in excess of 80oC).
Related Information:
There is also a good range of Drylin Sliding Bearings on the Small Parts and Bearings website.
Rod - Drill - S-7 Air Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
There is also a good range of Rod - Drill - S-7 Air Hardening on the Small Parts and Bearings website.
Bearings - Ball - Ceramic Hybrid
Steel Races with Si3N4 Ceramic Balls
Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC.
Related Information:
There is also a good range of Bearings - Ball - Ceramic Hybrid on the Small Parts and Bearings website.
Attachments - Thimbles - Stainless Steel
316 Stainless Steel. Use with synchromesh cable or standard miniature cable. Use with synchromesh or standard miniature cable
Thimbles provide loop support at higher loads and protect cables from wear when motion is present. Some thimbles may have open or uneven ends.
Related Information:
There is also a good range of Attachments - Thimbles - Stainless Steel on the Small Parts and Bearings website.
Bearings - One Way - Sprag - Standard
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.
Related Information:
There is also a good range of Bearings - One Way - Sprag - Standard on the Small Parts and Bearings website.
Bushes - Plastic - Clip - Bevelled Edge
M250 Polymer minus 40 Deg C to 80 Deg C (minus 40 Deg F to 176 Deg F). Used as a light duty split bearing.
Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight.
Related Information:
There is also a good range of Bushes - Plastic - Clip - Bevelled Edge on the Small Parts and Bearings website.
Inserts - Self Tapping - For Wood - Slotted Drive
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.
Related Information:
There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - Swaged Construction - Female
Designed for heavy duty service, they come with dirt shield to provide protection against contaminants.
Unique assembly swages metal to retain the ball in cavity resulting in increased pull out and wear resistance. Ball studs are surface hardened. Made of low carbon steel, plated and dichromate treated.
There is also a good range of Rod Ends - Steel - Studded - Swaged Construction - Female on the Small Parts and Bearings website.
Slides - Dovetail
Used for work feeders for production milling, positioning fixutres, work holding devices, checking fixtures, shuttle devices, assembly equipment, etc.
Tapered gibs are adjusted with a single screw that moves the gib on the taper. This type remains parallel and wears less as it occurs over the entire surface. Made of continuous cast GS 40,000 PSI pearlitic grey iron. Able to be milled, drilled, tapped, etc.
There is also a good range of Slides - Dovetail on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125386 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
