Washers Flat Plastic Categories
Washers - Flat - PVC
Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
Flat washers.
Related Information:
There is also a good range of Washers - Flat - PVC on the Small Parts and Bearings website.
Washers - Flat - Nylon
Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
Flat washers.
Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.
Related Information:
There is also a good range of Washers - Flat - Nylon on the Small Parts and Bearings website.
Washers - Flat - PTFE
Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
Teflon Washers
Related Information:
There is also a good range of Washers - Flat - PTFE on the Small Parts and Bearings website.
You may also be interested in
Springs Disc
Washers - Disc Spring - Plastic
Also known as belleville washers.
Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.
There is also a good range of Washers - Disc Spring - Plastic on the Small Parts and Bearings website.
Bearings Thrust
Washers - Self Aligning - Sets - Plastic
Spherical Seat Washers
Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.
Related Information:
There is also a good range of Washers - Self Aligning - Sets - Plastic on the Small Parts and Bearings website.
Pins - Locating - Spring - Plastic Pin - Sealed
Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.
Related Information:
There is also a good range of Pins - Locating - Spring - Plastic Pin - Sealed on the Small Parts and Bearings website.
Pins - Locating - Spring - Plastic Pin - Unsealed
Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.
Related Information:
There is also a good range of Pins - Locating - Spring - Plastic Pin - Unsealed on the Small Parts and Bearings website.
Pins - Hammer Drive - Flat Head
Used to replace screws where the need to remove the pin is unlikely.
Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
Related Information:
There is also a good range of Pins - Hammer Drive - Flat Head on the Small Parts and Bearings website.
Washers - Flat - Fibre
Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
Flat red vulcanised fibre washers. Black available on request and sufficient quantity.
Operating temperature up to 105 oC. Tensile strength 6 kg/mm2. Elongation up to 19 percent. Shrinkage up to 3 percent thickness. Water absorption 4 to 70 percent after 24 hours. Density 1 to 1.45 g/cm.
Related Information:
There is also a good range of Washers - Flat - Fibre on the Small Parts and Bearings website.
Washers - Flat - Aluminium
Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Flat washers.
Related Information:
There is also a good range of Washers - Flat - Aluminium on the Small Parts and Bearings website.
Washers - Flat - Brass - Commercial
Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Flat washers.
Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.
Related Information:
There is also a good range of Washers - Flat - Brass - Commercial on the Small Parts and Bearings website.
Washers - Flat - Brass - Precision
Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Precision Tolerances. Laminated brass shim washers.
Related Information:
There is also a good range of Washers - Flat - Brass - Precision on the Small Parts and Bearings website.
Washers - Flat - Carbon Spring Steel - Precision Shim
Flat Carbon Spring Steel Washers. Commonly used for fast and accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools.
C1010 steel types best suited to arbor shimming.
Related Information:
There is also a good range of Washers - Flat - Carbon Spring Steel - Precision Shim on the Small Parts and Bearings website.
Washers - Flat - Hardened Steel
Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Medium carbon steel through hardened to RC 43-49. Zinc dichromate finish. All dimensions shows are minimum.
Related Information:
There is also a good range of Washers - Flat - Hardened Steel on the Small Parts and Bearings website.
Washers - Flat - High Tensile
Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Grade 8 high tensile washers
ASTM F436 1985. Please note! Tolerances for commercial grade washers are much larger than for precision washers.
Related Information:
There is also a good range of Washers - Flat - High Tensile on the Small Parts and Bearings website.
Washers - Flat - Mild Steel
Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Flat washers. Includes fender washers. Zinc plated and unplated listings.
In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.
Related Information:
There is also a good range of Washers - Flat - Mild Steel on the Small Parts and Bearings website.
Washers - Flat - Sintered Bronze - Precision
Also see combined categories:
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Flat thrust washers made from oil impregnated sintered bronze
Related Information:
There is also a good range of Washers - Flat - Sintered Bronze - Precision on the Small Parts and Bearings website.
Washers - Flat - Stainless Steel 304 - Commercial
Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Flat washers.
Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.
Related Information:
There is also a good range of Washers - Flat - Stainless Steel 304 - Commercial on the Small Parts and Bearings website.
Washers - Flat - Stainless Steel 316 - Commercial
Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Flat washers.
Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.
Related Information:
There is also a good range of Washers - Flat - Stainless Steel 316 - Commercial on the Small Parts and Bearings website.
Washers - Flat - Stainless Steel - Precision Shim
Precision Tolerances.
Related Information:
There is also a good range of Washers - Flat - Stainless Steel - Precision Shim on the Small Parts and Bearings website.
Washers - Flat - Stamped - Heavy Duty - Hardened
Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Heat treated. Black oxide finish.
Related Information:
There is also a good range of Washers - Flat - Stamped - Heavy Duty - Hardened on the Small Parts and Bearings website.
Washers - Flat - Titanium - CP Grade 1
Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Flat washers. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Commercially pure for general industrial corrosion applications. UNS R50250. Please note! Tolerances for commercial grade washers are much larger than for precision washers. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Washers - Flat - Titanium - CP Grade 1 on the Small Parts and Bearings website.
Washers - Flat - Rubber
Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
Nitrile Duro 70
Related Information:
There is also a good range of Washers - Flat - Rubber on the Small Parts and Bearings website.
Washers - C - Steel
Cold finished steel, case hardened with a black oxide finish.
There is also a good range of Washers - C - Steel on the Small Parts and Bearings website.
Washers - C - Swing
Cold finished steel, hardened and ground. Black oxide finish.
There is also a good range of Washers - C - Swing on the Small Parts and Bearings website.
Washers - C - 303 Stainless Steel
Knurled outside edge
There is also a good range of Washers - C - 303 Stainless Steel on the Small Parts and Bearings website.
Washers - Heavy Duty - Machined - Steel
Case hardened cold finished steel with black oxide finish.
Related Information:
There is also a good range of Washers - Heavy Duty - Machined - Steel on the Small Parts and Bearings website.
Washers - Heavy Duty - Machined - Stainless Steel
303 Stainless Steel
Related Information:
There is also a good range of Washers - Heavy Duty - Machined - Stainless Steel on the Small Parts and Bearings website.
Screws - Thumb - Flat Key Head - Washer Face - Steel
Flat Key head malleable iron screws with an integral washer
Related Information:
There is also a good range of Screws - Thumb - Flat Key Head - Washer Face - Steel on the Small Parts and Bearings website.
Spacers - Arbor
Flat arbor shim washers with keyway groove.
There is also a good range of Spacers - Arbor on the Small Parts and Bearings website.
Handles - Latching - 2-Point Locking Rod Kit
Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.
There is also a good range of Handles - Latching - 2-Point Locking Rod Kit on the Small Parts and Bearings website.
Bumpers - Round - Urethane - Female Washer
With steel core. Washer type has a counterbored hole to accept a socket head cap screw. Flat washer molded inside.
There is also a good range of Bumpers - Round - Urethane - Female Washer on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Flat - Chrome Steel
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Flat - Chrome Steel on the Small Parts and Bearings website.
Bearings - Thrust - Ball - Flat - Stainless Steel
3 Piece Thrust Bearings Open Type with Flat Washers
These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.
Related Information:
There is also a good range of Bearings - Thrust - Ball - Flat - Stainless Steel on the Small Parts and Bearings website.
Screws - Panel - Jack - Steel
Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.
Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.
There is also a good range of Screws - Panel - Jack - Steel on the Small Parts and Bearings website.
Balls - Plastic - Acetal
High intensity strength, rigidity, outstanding resistance to abrasion and most solvents.
Tolerances available on request. Acetal Copolymer. High intensity strength, rigidity, outstanding resistance to abrasion and most solvents. Opaque White. Specific Gravity: 1.4.
Related Information:
There is also a good range of Balls - Plastic - Acetal on the Small Parts and Bearings website.
Balls - Plastic - PVC
Polyvinyl chloride. PVC is a chemically stable material, which shows little change in molecular structure, and also exhibits little change in its mechanical strength.
Polyvinyl chloride is a widely used and inexpensive thermoplastic polymer. It is easily worked or machined and has good chemical and biological resistance. It is relatively hard and can be polished to a shine. Polyvinyl chloride is a widely used and inexpensive thermoplastic polymer. Heat Deflection Temperature 176 F / 80 C. Rockwell Hardness 115. Zero water absorption in 24 hours.
Related Information:
There is also a good range of Balls - Plastic - PVC on the Small Parts and Bearings website.
Balls - Plastic - Bored
Bored acetal balls as used in plastic rod ends.
Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight.
Related Information:
There is also a good range of Balls - Plastic - Bored on the Small Parts and Bearings website.
Gauges - Plastic Thickness
Fan blade style has 13 colour-coded thickness blades riveted together for on-site convenience.
Made from polyester and vinyl. Non-corrosive, non-conductive, non-sparking and non-marring.
There is also a good range of Gauges - Plastic Thickness on the Small Parts and Bearings website.
Shim - Plastic
Easy to cut - colour coded - plastic shim sheets. Precision thicknesses.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Made from sturdy polyester.
Related Information:
There is also a good range of Shim - Plastic on the Small Parts and Bearings website.
Chain - Roller - Plastic - Simplex
Includes acetal, polyproylene and nylon. Miniature size from 3.1mm up to 12.7mm. Single row.
Snap together construction - no joining links required.
Related Information:
There is also a good range of Chain - Roller - Plastic - Simplex on the Small Parts and Bearings website.
Threaded Rod - Allthread - Plastic
UNC - UNF - METRIC - Nylon and PVC. Also known as booker rod.
Light Weight. Non Corrosive. Vibration Resistant.
There is also a good range of Threaded Rod - Allthread - Plastic on the Small Parts and Bearings website.
Universal Joints - Telescoping - Plastic - Brass Spider and Insert
Acetal plastic telescoping universal joints with nickle plated brass spiders and bore inserts
There is also a good range of Universal Joints - Telescoping - Plastic - Brass Spider and Insert on the Small Parts and Bearings website.
Bearings - Acetal - Solid - For Plastic Housings
Insert bearings ideal for wet conditions. Similar to wide inner ring bearings for P, F, Fl type housings but solid plastic.
Load and speed calculations are for reference only. Testing is recommended.
Related Information:
There is also a good range of Bearings - Acetal - Solid - For Plastic Housings on the Small Parts and Bearings website.
Gear Racks - Module 0.5 - Plastic
20o Pressure Angle. Acetal and Nylon
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.
There is also a good range of Gear Racks - Module 0.5 - Plastic on the Small Parts and Bearings website.
Gears - Mitre - Module 0.5 - Plastic
1:1 Ratio. 20o Pressure Angle - Acetal
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - Module 0.5 - Plastic on the Small Parts and Bearings website.
Gears - Mitre - Module 1 - Plastic
1:1 Ratio. 20o Pressure Angle - Acetal.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - Module 1 - Plastic on the Small Parts and Bearings website.
Gears - Mitre - Module 2 - Plastic
1:1 Ratio. 20o Pressure Angle - Acetal
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - Module 2 - Plastic on the Small Parts and Bearings website.
Gears - Mitre - Module 3 - Plastic
1:1 Ratio. 20o Pressure Angle - Acetal
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.
Related Information:
There is also a good range of Gears - Mitre - Module 3 - Plastic on the Small Parts and Bearings website.
Gears - Spur - Module 0.4 - Plastic
PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal
Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - Module 0.4 - Plastic on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125387 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
