Miniature Bearings Australia Pty Ltd

Washers Aligning Categories


Washers - Self Aligning - Components - Hardened Steel
Washers - Self Aligning - Components - Hardened Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

Case Hardened steel 9 S Mn Pb 28 K DIN 6319. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-G washers are used for clamping mechanical parts with non-parallel surfaces. Designed for screw solidity in compliance with 8.8. Limited for use on flat closed ring areas - not for elongated holes.

There is also a good range of Washers - Self Aligning - Components - Hardened Steel on the Small Parts and Bearings website.


Washers - Self Aligning - Components - Stainless Steel
Washers - Self Aligning - Components - Stainless Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

AISI 303 Stainless Steel. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces. This category may be available in the new MBA online store at Washers - Self Aligning - Components - Stainless Steel.

There is also a good range of Washers - Self Aligning - Components - Stainless Steel on the Small Parts and Bearings website.


Washers - Self Aligning - Sets - Hardened Steel
Washers - Self Aligning - Sets - Hardened Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces. This category may be available in the new MBA online store at Washers - Self Aligning - Sets - Hardened Steel.

There is also a good range of Washers - Self Aligning - Sets - Hardened Steel on the Small Parts and Bearings website.


Washers - Self Aligning - Sets - Stainless Steel
Washers - Self Aligning - Sets - Stainless Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces. This category may be available in the new MBA online store at Washers - Self Aligning - Sets - Stainless Steel.

There is also a good range of Washers - Self Aligning - Sets - Stainless Steel on the Small Parts and Bearings website.


Housings - Flanged - Self Aligning - Bronze - Heavy Duty
Housings - Flanged - Self Aligning - Bronze - Heavy Duty

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning bronze bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:

There is also a good range of Housings - Flanged - Self Aligning - Bronze - Heavy Duty on the Small Parts and Bearings website.


Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm-
Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm-

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo low profile self aligning flange mounted acetal Delrin AF bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm-.

Related Information:

There is also a good range of Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm- on the Small Parts and Bearings website.


Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm-
Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm-

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo low profile self aligning flange mounted acetal Delrin bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm-.

Related Information:

There is also a good range of Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm- on the Small Parts and Bearings website.


Housings - Flanged - Self Aligning - Needle Roller
Housings - Flanged - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning needle roller bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:

There is also a good range of Housings - Flanged - Self Aligning - Needle Roller on the Small Parts and Bearings website.


Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.

Related Information:

There is also a good range of Bearings - Ceramic ZrO2 - Self Aligning - Double Row on the Small Parts and Bearings website.


Bearings - Self Clinching - Self Aligning - Delrin -tm-
Bearings - Self Clinching - Self Aligning - Delrin -tm-

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in a special steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

There is also a good range of Bearings - Self Clinching - Self Aligning - Delrin -tm- on the Small Parts and Bearings website.


Bearings - Self Clinching - Self Aligning - Sintered Bronze
Bearings - Self Clinching - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

There is also a good range of Bearings - Self Clinching - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.


Housings - Flange Mount - Non Aligning - Bronze
Housings - Flange Mount - Non Aligning - Bronze

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile flange mounted PTFE bronze bearings

See links at bottom of web page for more information. This category may be available in the new MBA online store at Housings - Flange Mount - Non Aligning - Bronze.

Related Information:

There is also a good range of Housings - Flange Mount - Non Aligning - Bronze on the Small Parts and Bearings website.


Housings - Flange Mount - Non Aligning - Needle Roller
Housings - Flange Mount - Non Aligning - Needle Roller

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile flange mounted needle roller bearings

See links at bottom of web page for more information. This category may be available in the new MBA online store at Housings - Flange Mount - Non Aligning - Needle Roller.

Related Information:

There is also a good range of Housings - Flange Mount - Non Aligning - Needle Roller on the Small Parts and Bearings website.


Housings - Flange Mount - Self Aligning - Delrin
Housings - Flange Mount - Self Aligning - Delrin

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted acetal Delrin bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flange Mount - Self Aligning - Delrin.

Related Information:

There is also a good range of Housings - Flange Mount - Self Aligning - Delrin on the Small Parts and Bearings website.


Housings - Flange Mount - Self Aligning - Delrin AF
Housings - Flange Mount - Self Aligning - Delrin AF

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted acetal Delrin AF bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flange Mount - Self Aligning - Delrin AF.

Related Information:

There is also a good range of Housings - Flange Mount - Self Aligning - Delrin AF on the Small Parts and Bearings website.


Housings - Flange Mount - Self Aligning - Needle Roller
Housings - Flange Mount - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted needle roller bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flange Mount - Self Aligning - Needle Roller.

Related Information:

There is also a good range of Housings - Flange Mount - Self Aligning - Needle Roller on the Small Parts and Bearings website.


Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp
Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted high temperature PTFE bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp.

Related Information:

There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp on the Small Parts and Bearings website.


Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp
Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted low temperature PTFE bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp.

Related Information:

There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp on the Small Parts and Bearings website.


Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard
Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted PTFE bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard.

Related Information:

There is also a good range of Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard on the Small Parts and Bearings website.


Housings - Flange Mount - Self Aligning - Sintered Bronze
Housings - Flange Mount - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted sintered bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flange Mount - Self Aligning - Sintered Bronze.

Related Information:

There is also a good range of Housings - Flange Mount - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.


Housings - Pillow Block - Self Aligning - Needle Roller
Housings - Pillow Block - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning needle roller bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:

There is also a good range of Housings - Pillow Block - Self Aligning - Needle Roller on the Small Parts and Bearings website.


Housings - Pillow Block - Self Aligning - Sintered Bronze
Housings - Pillow Block - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with porous sintered bronze

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Related Information:

There is also a good range of Housings - Pillow Block - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.


Bearings - Ball - Double Row - Self Aligning - Parallel Bore
Bearings - Ball - Double Row - Self Aligning - Parallel Bore

Also see combined categories:
All Double Row Ball Bearings
All Self Aligning Ball Bearings

This category may be available in the new MBA online store at Bearings - Ball - Double Row - Self Aligning - Parallel Bore.

Related Information:

There is also a good range of Bearings - Ball - Double Row - Self Aligning - Parallel Bore on the Small Parts and Bearings website.


Bearings - Ball - Double Row - Self Aligning - Tapered Bore - Heavy Series
Bearings - Ball - Double Row - Self Aligning - Tapered Bore - Heavy Series

Also see combined categories:
All Double Row Ball Bearings
All Self Aligning Ball Bearings

Use with H300 heavy series adaptor sleeves or AH300 Withdrawal sleeves


Related Information:


Bearings - Ball - Double Row - Self Aligning - Tapered Bore - Light Series
Bearings - Ball - Double Row - Self Aligning - Tapered Bore - Light Series

Also see combined categories:
All Double Row Ball Bearings
All Self Aligning Ball Bearings

Use with H200 light series adaptor sleeves or AH200 Withdrawal sleeves


Related Information:


Bearings - Self Clinching - Miniature - Self Aligning
Bearings - Self Clinching - Miniature - Self Aligning

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.

Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 oC to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.

There is also a good range of Bearings - Self Clinching - Miniature - Self Aligning on the Small Parts and Bearings website.


Housings - Bearing - Pedestal - Miniature - Self Aligning
Housings - Bearing - Pedestal - Miniature - Self Aligning

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.

There is also a good range of Housings - Bearing - Pedestal - Miniature - Self Aligning on the Small Parts and Bearings website.


Socket Set Screws - Flat Tip - Aligning - Carbon Steel
Socket Set Screws - Flat Tip - Aligning - Carbon Steel

Also see combined categories:
All Flat Aligning Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw. This category may be available in the new MBA online store at Socket Set Screws - Flat Tip - Aligning - Carbon Steel.

Related Information:

There is also a good range of Socket Set Screws - Flat Tip - Aligning - Carbon Steel on the Small Parts and Bearings website.


Socket Set Screws - Flat Tip - Aligning - Stainless Steel
Socket Set Screws - Flat Tip - Aligning - Stainless Steel

Also see combined categories:
All Flat Aligning Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw. This category may be available in the new MBA online store at Socket Set Screws - Flat Tip - Aligning - Stainless Steel.

Related Information:

There is also a good range of Socket Set Screws - Flat Tip - Aligning - Stainless Steel on the Small Parts and Bearings website.


Housings - Bearing - Flange Mounted - Frelon - Self Aligning
Housings - Bearing - Flange Mounted - Frelon - Self Aligning


Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Flange Mounted - Frelon - Self Aligning.

There is also a good range of Housings - Bearing - Flange Mounted - Frelon - Self Aligning on the Small Parts and Bearings website.


Housings - Bearing - Flanged - 2 Bolt Hole - W300
Housings - Bearing - Flanged - 2 Bolt Hole - W300

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing: Igumid G. Ball: Highly wear resistant Iglidur W300. This category may be available in the new MBA online store at Housings - Bearing - Flanged - 2 Bolt Hole - W300.

There is also a good range of Housings - Bearing - Flanged - 2 Bolt Hole - W300 on the Small Parts and Bearings website.


Housings - Pillow Block - Washdown
Housings - Pillow Block - Washdown

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo electroless nickel plated aluminium housing with stainless steel coated self aligning acetal bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Electroless nickel plated aluminium housing. Corrosion Resistant. Light weight.

Related Information:

There is also a good range of Housings - Pillow Block - Washdown on the Small Parts and Bearings website.


Washers - Thrust - DP4 Type
Washers - Thrust - DP4 Type

Also see combined categories:
All Thrust Washers

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N per mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free. This category may be available in the new MBA online store at Washers - Thrust - DP4 Type.

There is also a good range of Washers - Thrust - DP4 Type on the Small Parts and Bearings website.


Washers - Disc Spring - Ball Bearing Type
Washers - Disc Spring - Ball Bearing Type

Also see combined categories:
All Disc Springs

Specially designed for preloading the outer ring of ball bearings. C1075 steel. Includes disc springs to DIN 2093.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown. This category may be available in the new MBA online store at Washers - Disc Spring - Ball Bearing Type.

There is also a good range of Washers - Disc Spring - Ball Bearing Type on the Small Parts and Bearings website.


Washers - Disc Spring - Carbon Steel
Washers - Disc Spring - Carbon Steel

Also see combined categories:
All Disc Springs

Includes disc springs to DIN 2093.

Manufactured under strict quality control to conform to DIN 2093. This category may be available in the new MBA online store at Washers - Disc Spring - Carbon Steel.

There is also a good range of Washers - Disc Spring - Carbon Steel on the Small Parts and Bearings website.


Washers - Disc Spring - Flange Locking Type
Washers - Disc Spring - Flange Locking Type

Also see combined categories:
All Disc Springs

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.

There is also a good range of Washers - Disc Spring - Flange Locking Type on the Small Parts and Bearings website.


Washers - Disc Spring - Plastic
Washers - Disc Spring - Plastic

Also see combined categories:
All Disc Springs

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.

There is also a good range of Washers - Disc Spring - Plastic on the Small Parts and Bearings website.


Washers - Disc Spring - Stainless Steel
Washers - Disc Spring - Stainless Steel

Also see combined categories:
All Disc Springs

Includes disc springs to DIN 2093 and belleville washers to DIN 6796.

Manufactured under strict quality control to conform to DIN 2093. This category may be available in the new MBA online store at Washers - Disc Spring - Stainless Steel.

There is also a good range of Washers - Disc Spring - Stainless Steel on the Small Parts and Bearings website.


Washers - Spring - 2 Wave Type - Zinc Plated
Washers - Spring - 2 Wave Type - Zinc Plated

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

This category may be available in the new MBA online store at Washers - Spring - 2 Wave Type - Zinc Plated.

There is also a good range of Washers - Spring - 2 Wave Type - Zinc Plated on the Small Parts and Bearings website.


Washers - Spring - 3 Wave Type - 302 Stainless Steel
Washers - Spring - 3 Wave Type - 302 Stainless Steel

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

This category may be available in the new MBA online store at Washers - Spring - 3 Wave Type - 302 Stainless Steel.

There is also a good range of Washers - Spring - 3 Wave Type - 302 Stainless Steel on the Small Parts and Bearings website.


Washers - Spring - 3 Wave Type - 400 Grade Stainless
Washers - Spring - 3 Wave Type - 400 Grade Stainless

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

This category may be available in the new MBA online store at Washers - Spring - 3 Wave Type - 400 Grade Stainless.

There is also a good range of Washers - Spring - 3 Wave Type - 400 Grade Stainless on the Small Parts and Bearings website.


Washers - Spring - 3 Wave Type - Berryllium Copper
Washers - Spring - 3 Wave Type - Berryllium Copper

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

This category may be available in the new MBA online store at Washers - Spring - 3 Wave Type - Berryllium Copper.

There is also a good range of Washers - Spring - 3 Wave Type - Berryllium Copper on the Small Parts and Bearings website.


Washers - Spring - Curved - Carbon Steel
Washers - Spring - Curved - Carbon Steel

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

ID and OD are long axis dimensions. This category may be available in the new MBA online store at Washers - Spring - Curved - Carbon Steel.

There is also a good range of Washers - Spring - Curved - Carbon Steel on the Small Parts and Bearings website.


Washers - Spring - Curved - Stainless Steel
Washers - Spring - Curved - Stainless Steel

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

ID and OD are long axis dimensions. This category may be available in the new MBA online store at Washers - Spring - Curved - Stainless Steel.

There is also a good range of Washers - Spring - Curved - Stainless Steel on the Small Parts and Bearings website.


Washers - Spring - Wave Type - Carbon Steel
Washers - Spring - Wave Type - Carbon Steel

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave. Includes 2 and 3 wave types. This category includes EPL type bearing pre-load washers.

This category may be available in the new MBA online store at Washers - Spring - Wave Type - Carbon Steel.

There is also a good range of Washers - Spring - Wave Type - Carbon Steel on the Small Parts and Bearings website.


Washers - Cup - Aluminium
Washers - Cup - Aluminium

Also see combined categories:
All Cup Washers

For countersunk screws.

Aluminium solid cup washers. This category may be available in the new MBA online store at Washers - Cup - Aluminium.

There is also a good range of Washers - Cup - Aluminium on the Small Parts and Bearings website.


Washers - Cup - Brass - Nickel Plated
Washers - Cup - Brass - Nickel Plated

Also see combined categories:
All Cup Washers

For countersunk screws.

This category may be available in the new MBA online store at Washers - Cup - Brass - Nickel Plated.

There is also a good range of Washers - Cup - Brass - Nickel Plated on the Small Parts and Bearings website.


Washers - Cup - Nylon
Washers - Cup - Nylon

Also see combined categories:
All Cup Washers

Countersunk washers for use with screws for decorative finishing

This category may be available in the new MBA online store at Washers - Cup - Nylon.

There is also a good range of Washers - Cup - Nylon on the Small Parts and Bearings website.


Washers - Cup - Stainless Steel
Washers - Cup - Stainless Steel

Also see combined categories:
All Cup Washers

For countersunk screws.

Stainless Steel cup washers. This category may be available in the new MBA online store at Washers - Cup - Stainless Steel.

There is also a good range of Washers - Cup - Stainless Steel on the Small Parts and Bearings website.


Washers - Flat - Fibre
Washers - Flat - Fibre

Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic

Flat red vulcanised fibre washers. Black available on request and sufficient quantity.

Operating temperature up to 105 oC. Tensile strength 6 kg/mm2. Elongation up to 19 percent. Shrinkage up to 3 percent thickness. Water absorption 4 to 70 percent after 24 hours. Density 1 to 1.45 g/cm.

Related Information:

There is also a good range of Washers - Flat - Fibre on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.