Miniature Bearings Australia Pty Ltd

Vee Belts Categories


Belts - Wedge - 12.7 x 10.0mm - SPA
Belts - Wedge - 12.7 x 10.0mm - SPA

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.7mm Top Width x 10.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

There is also a good range of Belts - Wedge - 12.7 x 10.0mm - SPA on the Small Parts and Bearings website.


Belts - Wedge - 15.9 x 13.5mm - Notched 5VX
Belts - Wedge - 15.9 x 13.5mm - Notched 5VX

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

15.9mm Top Width x 13.5mm Height.


Related Information:

There is also a good range of Belts - Wedge - 15.9 x 13.5mm - Notched 5VX on the Small Parts and Bearings website.


Belts - Wedge - 16.3 x 13.0mm - SPB - 5V
Belts - Wedge - 16.3 x 13.0mm - SPB - 5V

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

16.3mm Top Width x 13.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

There is also a good range of Belts - Wedge - 16.3 x 13.0mm - SPB - 5V on the Small Parts and Bearings website.


Belts - Wedge - 25.4 x 22.2mm - SPP-8V
Belts - Wedge - 25.4 x 22.2mm - SPP-8V


25.4mm Top Width x 22.2mm Height.

Sizes are nominal and may vary slightly.

Related Information:

There is also a good range of Belts - Wedge - 25.4 x 22.2mm - SPP-8V on the Small Parts and Bearings website.


Belts - Wedge - 9.7 x 8.0mm - SPZ - 3V
Belts - Wedge -  9.7 x 8.0mm - SPZ - 3V

Also see combined categories:
All Vee Pulleys M Section 10mm Top Width

Miniature and small belts. 9.7mm Top Width x 8.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

There is also a good range of Belts - Wedge - 9.7 x 8.0mm - SPZ - 3V on the Small Parts and Bearings website.


Belts - Wedge - 9.5 x 7.9mm - Notched XPZ - 3VX
Belts - Wedge -  9.5 x 7.9mm - Notched XPZ - 3VX

Also see combined categories:
All Vee Pulleys M Section 10mm Top Width

Miniature and small belts. 9.5mm Top Width x 7.9mm Height.


Related Information:

There is also a good range of Belts - Wedge - 9.5 x 7.9mm - Notched XPZ - 3VX on the Small Parts and Bearings website.


Belts - Vee - 10.0 x 5.5mm - M-3L
Belts - Vee - 10.0 x 5.5mm - M-3L

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 5.5mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:

There is also a good range of Belts - Vee - 10.0 x 5.5mm - M-3L on the Small Parts and Bearings website.


Belts - Vee - 12.5 x 9.0mm - A-4L
Belts - Vee - 12.5 x 9.0mm - A-4L

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.5mm Top Width x 9.0mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:

There is also a good range of Belts - Vee - 12.5 x 9.0mm - A-4L on the Small Parts and Bearings website.


Belts - Vee - 12.7 x 7.9mm - Notched AX
Belts - Vee - 12.7 x 7.9mm - Notched AX

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.7mm Top Width x 7.9mm Height.


Related Information:

There is also a good range of Belts - Vee - 12.7 x 7.9mm - Notched AX on the Small Parts and Bearings website.


Belts - Vee - 15.9 x 10.3mm - Notched BX
Belts - Vee - 15.9 x 10.3mm - Notched BX

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

15.9mm Top Width x 10.3mm Height.


Related Information:

There is also a good range of Belts - Vee - 15.9 x 10.3mm - Notched BX on the Small Parts and Bearings website.


Belts - Vee - 22.2 x 13.5mm - Notched CX
Belts - Vee - 22.2 x 13.5mm - Notched CX

Also see combined categories:
All Vee Belts 22mm and 22.2mm Top Width

22.2mm Top Width x 13.5mm Height.


Related Information:

There is also a good range of Belts - Vee - 22.2 x 13.5mm - Notched CX on the Small Parts and Bearings website.


Belts - Vee - 8.0 x 4.0mm
Belts - Vee -  8.0 x 4.0mm

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 8.0mm Top Width x 4.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

There is also a good range of Belts - Vee - 8.0 x 4.0mm on the Small Parts and Bearings website.


Belts - Vee - 10.0 x 6.0mm - Z
Belts - Vee - 10.0 x 6.0mm - Z

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 6.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

There is also a good range of Belts - Vee - 10.0 x 6.0mm - Z on the Small Parts and Bearings website.


Belts - Vee - 16.5 x 11.0mm - B
Belts - Vee - 16.5 x 11.0mm - B

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

16.5mm Top Width x 11.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

There is also a good range of Belts - Vee - 16.5 x 11.0mm - B on the Small Parts and Bearings website.


Belts - Vee - 31.5 x 19.0mm - D
Belts - Vee - 31.5 x 19.0mm - D


31.5mm Top Width x 19.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

There is also a good range of Belts - Vee - 31.5 x 19.0mm - D on the Small Parts and Bearings website.


You may also be interested in

Belts Poly Vee


Belts - Poly V - J Section
Belts - Poly V - J Section


Belts include a tensile cord, most suited for industrial or adjustable applications

Poly V are ideal for high ratio and high speed drives. J Section is 2.34mm pitch and 3.56mm belt height. Note, this series is not a strechable type of belt.

There is also a good range of Belts - Poly V - J Section on the Small Parts and Bearings website.


Pulleys Vee


Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron
Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Dual purpose pulleys suit A section and M section belts

To determine the pitch diameter for M section deduct 8.636mm (0.34 inch) from the pitch diameter listed.

Related Information:

There is also a good range of Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron on the Small Parts and Bearings website.


Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron
Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron

Also see combined categories:
All Vee Pulleys M Section 10mm Top Width

Dual purpose pulleys suit A section and M section belts

To determine the pitch diameter for A section add 8.636mm (0.34 inch) to the pitch diameter listed.

Related Information:

There is also a good range of Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron on the Small Parts and Bearings website.


Pulleys Poly Vee


Pulleys - Poly V - J Section - Through Bored
Pulleys - Poly V - J Section - Through Bored


Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height.

There is also a good range of Pulleys - Poly V - J Section - Through Bored on the Small Parts and Bearings website.


Pulleys - Poly V - J Section - QD Bush
Pulleys - Poly V - J Section - QD Bush


Use with QD bush to suit your bore requirement

Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height.

There is also a good range of Pulleys - Poly V - J Section - QD Bush on the Small Parts and Bearings website.


Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core
Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core

Also see combined categories:
All Posi-Drive Belts

Same as US 20 Pitch - Use with Posi-Drive Sprockets.

Use Double Core with Posi-Drive Sprockets. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Related Information:

There is also a good range of Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core on the Small Parts and Bearings website.


Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core
Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core

Also see combined categories:
All Posi-Drive Belts

Same as US 20 Pitch - Use with Posi-Drive Pulleys.

Use Single Core with Posi-Drive Pulleys. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Related Information:

There is also a good range of Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core on the Small Parts and Bearings website.


Belts - Rounthane
Belts - Rounthane


Joinable belting. 88 Shore A hardness. Yellow colour. Temperature range -31 to 65 Deg C (-25 to 150 Deg F).

Join with Rounthane Connectors (purchased separately). Material : Non Slip Polyurethane. Use with grooved idler pulleys with diameters at least 8 times the belt width. Purchased per 305mm (1 foot). Orders for more than 1 foot will be supplied as a continuous length. FDA / USDA approved.

Related Information:

There is also a good range of Belts - Rounthane on the Small Parts and Bearings website.


Belts - Rounthane - Connectors
Belts - Rounthane - Connectors


Joinable belting connectors.


Related Information:

There is also a good range of Belts - Rounthane - Connectors on the Small Parts and Bearings website.


Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide
Belts - Timing -  5.000mm Pitch - AT5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide
Belts - Timing -  5.000mm Pitch - AT5 -  6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide
Belts - Timing -  5.000mm Pitch - AT5 -  8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide on the Small Parts and Bearings website.


Belts - Timing - 14.000mm Pitch - GT2 - 115mm Wide
Belts - Timing - 14.000mm Pitch - GT2 - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - GT2 - 115mm Wide on the Small Parts and Bearings website.


Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide
Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide on the Small Parts and Bearings website.


Belts - Timing - 14.000mm Pitch - GT2 - 40mm Wide
Belts - Timing - 14.000mm Pitch - GT2 -  40mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - GT2 - 40mm Wide on the Small Parts and Bearings website.


Belts - Timing - 14.000mm Pitch - GT2 - 55mm Wide
Belts - Timing - 14.000mm Pitch - GT2 -  55mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - GT2 - 55mm Wide on the Small Parts and Bearings website.


Belts - Timing - 14.000mm Pitch - GT2 - 85mm Wide
Belts - Timing - 14.000mm Pitch - GT2 -  85mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 14.000mm Pitch - GT2 - 85mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.000mm Pitch - GT2 - 16mm Wide
Belts - Timing -  2.000mm Pitch - GT2 - 16mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 2.000mm Pitch - GT2 - 16mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.000mm Pitch - GT2 - 3mm Wide
Belts - Timing -  2.000mm Pitch - GT2 -  3mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.

Related Information:

There is also a good range of Belts - Timing - 2.000mm Pitch - GT2 - 3mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.000mm Pitch - GT2 - 4mm Wide
Belts - Timing -  2.000mm Pitch - GT2 -  4mm Wide

Also see combined categories:
All 2mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. For easy ready selected sets of timing belts and pulleys please see the HES website.

Related Information:

There is also a good range of Belts - Timing - 2.000mm Pitch - GT2 - 4mm Wide on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122538 products in 2633 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122538 products in 2633 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.