Miniature Bearings Australia Pty Ltd

Universal Joints Telescoping Categories


Universal Joints - Telescoping - Plastic - Brass Spider and Insert
Universal Joints - Telescoping - Plastic - Brass Spider and Insert

Also see combined categories:
All Universal Joints
All Telescoping Universals

Acetal plastic telescoping universal joints with nickle plated brass spiders and bore inserts


There is also a good range of Universal Joints - Telescoping - Plastic - Brass Spider and Insert on the Small Parts and Bearings website.


Universal Joints - Double Joint - Hobby
Universal Joints - Double Joint - Hobby

Also see combined categories:
All Universal Joints
All Double Joint Universals

C45 Carbon Steel. Maximum operating angle 60 degree. Slow speed only.


There is also a good range of Universal Joints - Double Joint - Hobby on the Small Parts and Bearings website.


Universal Joints - Double Joint - Plastic - Brass Bore Inserts
Universal Joints - Double Joint - Plastic - Brass Bore Inserts

Also see combined categories:
All Universal Joints
All Double Joint Universals

Plain acetal with brass centre, brass bore inserts and grub screw holes


There is also a good range of Universal Joints - Double Joint - Plastic - Brass Bore Inserts on the Small Parts and Bearings website.


Universal Joints - Single Joint - High Speed - Bored and Keyed
Universal Joints - Single Joint - High Speed - Bored and Keyed

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. With keyway. Maximum operating angle 25 to 45 degrees (refer tables).


Related Information:

There is also a good range of Universal Joints - Single Joint - High Speed - Bored and Keyed on the Small Parts and Bearings website.


Universal Joints - Single Joint - High Speed - Plain Bore
Universal Joints - Single Joint - High Speed - Plain Bore

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Maximum operating angle 25 to 45 degrees (refer tables).


Related Information:

There is also a good range of Universal Joints - Single Joint - High Speed - Plain Bore on the Small Parts and Bearings website.


Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless

Also see combined categories:
All Universal Joints
All Single Joint Universals

303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.


Related Information:

There is also a good range of Universal Joints - Single Joint - High Speed - Plain Bore - Stainless on the Small Parts and Bearings website.


Universal Joints - Single Joint - High Speed - Solid
Universal Joints - Single Joint - High Speed - Solid

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Unbored. Maximum operating angle 25 to 45 degrees (refer tables).


Related Information:

There is also a good range of Universal Joints - Single Joint - High Speed - Solid on the Small Parts and Bearings website.


Universal Joints - Single Joint - Hobby
Universal Joints - Single Joint - Hobby

Also see combined categories:
All Universal Joints
All Single Joint Universals

C45 Carbon Steel. Maximum operating angle 30 degree. Slow speed only.


There is also a good range of Universal Joints - Single Joint - Hobby on the Small Parts and Bearings website.


Universal Joints - Single Joint - Plastic - Brass Bore Inserts
Universal Joints - Single Joint - Plastic - Brass Bore Inserts

Also see combined categories:
All Universal Joints
All Single Joint Universals

Plain acetal with brass centre, brass bore inserts and grub screw holes


There is also a good range of Universal Joints - Single Joint - Plastic - Brass Bore Inserts on the Small Parts and Bearings website.


Universal Joints - Single Joint - Plastic - Brass Spider
Universal Joints - Single Joint - Plastic - Brass Spider

Also see combined categories:
All Universal Joints
All Single Joint Universals

Plain acetal with brass centre, no bore inserts or grub screw holes


There is also a good range of Universal Joints - Single Joint - Plastic - Brass Spider on the Small Parts and Bearings website.


Joints - Swivel - Miniature - Steel
Joints - Swivel - Miniature - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Miniature - Steel on the Small Parts and Bearings website.


Joints - Swivel - Knob Style - Steel
Joints - Swivel - Knob Style - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Knob Style - Steel on the Small Parts and Bearings website.


Joints - Swivel - Split Type - Steel
Joints - Swivel - Split Type - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Split Type - Steel on the Small Parts and Bearings website.


Joints - Swivel - Tee Handle - Steel
Joints - Swivel - Tee Handle - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Tee Handle - Steel on the Small Parts and Bearings website.


Joints - Swivel - Wing Knob - Steel
Joints - Swivel - Wing Knob - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Wing Knob - Steel on the Small Parts and Bearings website.


Joints - Swivel - Double Wing Knob - Steel
Joints - Swivel - Double Wing Knob - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


There is also a good range of Joints - Swivel - Double Wing Knob - Steel on the Small Parts and Bearings website.


Joints - Swivel - Knob Style - Stainless Steel
Joints - Swivel - Knob Style - Stainless Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.


There is also a good range of Joints - Swivel - Knob Style - Stainless Steel on the Small Parts and Bearings website.


Joints - Swivel - Wing Knob - Stainless Steel
Joints - Swivel - Wing Knob - Stainless Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.


There is also a good range of Joints - Swivel - Wing Knob - Stainless Steel on the Small Parts and Bearings website.


Snap Buttons - Double End
Snap Buttons - Double End

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

There is also a good range of Snap Buttons - Double End on the Small Parts and Bearings website.


Snap Buttons - Flat Type
Snap Buttons - Flat Type

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

There is also a good range of Snap Buttons - Flat Type on the Small Parts and Bearings website.


Snap Buttons - Single End - Dog Leg
Snap Buttons - Single End - Dog Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

There is also a good range of Snap Buttons - Single End - Dog Leg on the Small Parts and Bearings website.


Snap Buttons - Single End - Spring Leg
Snap Buttons - Single End - Spring Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

There is also a good range of Snap Buttons - Single End - Spring Leg on the Small Parts and Bearings website.


Mounts - Universal - For Acme Thread and Ballscrews
Mounts - Universal - For Acme Thread and Ballscrews


Use grade 8 hex socket head cap screws for mounting.


There is also a good range of Mounts - Universal - For Acme Thread and Ballscrews on the Small Parts and Bearings website.


Rings - Lift - Universal
Rings - Lift - Universal


For straight lifting only. Each ring offers three different thread sizes for varied use. Made of high strength steel. Do not apply side load. Lifting capacities are MAXIMUM safe working load.


There is also a good range of Rings - Lift - Universal on the Small Parts and Bearings website.


Pins - Ball Lock - Economy - Steel
Pins - Ball Lock - Economy - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Economical pins that can be used in military or conventional equipment. Also called detent pins.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Commercial drill tolerances provide clearance for standard pins. Zinc plated C1144 steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.

Related Information:

There is also a good range of Pins - Ball Lock - Economy - Steel on the Small Parts and Bearings website.


Pins - Ball Lock - Economy - Stainless Steel
Pins - Ball Lock - Economy - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Economical pins that can be used in military or conventional equipment. Type 303 stainless steel. Also called detent pins.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Stainless steel pins used in aircraft industry, food processing machinery, marine equipment, laboratory and testing equipment. Commercial drill tolerances provide clearance for standard pins. 303 stainless steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.

Related Information:

There is also a good range of Pins - Ball Lock - Economy - Stainless Steel on the Small Parts and Bearings website.


Joints - Ball Positioner
Joints - Ball Positioner


For holding parts at an angle up to 45 degrees

Pivots 45 Deg from horizontal in every direction. Tightens at any position by rotating the collar. Has a tapped hole at the top and a male thread at the bottom for securing.

There is also a good range of Joints - Ball Positioner on the Small Parts and Bearings website.


Joints - Clevis - Plastic
Joints - Clevis - Plastic

Also see combined categories:
All Clevis Joints

Use with plastic rod ends - Includes pin and clip. See also yokes.

Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.

There is also a good range of Joints - Clevis - Plastic on the Small Parts and Bearings website.


Joints - Dual Eye - Parallel
Joints - Dual Eye - Parallel


Maintenance free - self lubricating thermoplastic. Mechanical joining linkage. Self aligning to compensate for angular misalignment. MSTS = Maximum Static Tensile Strength. MSAS = Maximum Static Axial Compressive Strength.

There is also a good range of Joints - Dual Eye - Parallel on the Small Parts and Bearings website.


Joints - Tee - Tubing and Rod
Joints - Tee - Tubing and Rod


Inexpensive nylon joiners for hobby tubing and rod


There is also a good range of Joints - Tee - Tubing and Rod on the Small Parts and Bearings website.


Tube - Round - Aluminium
Tube - Round - Aluminium

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

There is also a good range of Tube - Round - Aluminium on the Small Parts and Bearings website.


Tube - Round - Brass
Tube - Round - Brass

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

There is also a good range of Tube - Round - Brass on the Small Parts and Bearings website.


Tube - Round - Copper
Tube - Round - Copper

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

There is also a good range of Tube - Round - Copper on the Small Parts and Bearings website.


Rod Ends - Steel - Studded - Quick Disconnect - Female
Rod Ends - Steel - Studded - Quick Disconnect - Female

Also see combined categories:
All Female Rod Ends with Stud

Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.

There is also a good range of Rod Ends - Steel - Studded - Quick Disconnect - Female on the Small Parts and Bearings website.


Rod Ends - Steel - Nylon Raceway - Female
Rod Ends - Steel - Nylon Raceway - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Also known as Heim Joints


There is also a good range of Rod Ends - Steel - Nylon Raceway - Female on the Small Parts and Bearings website.


Rod Ends - Steel - Nylon Raceway - Male
Rod Ends - Steel - Nylon Raceway - Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Also known as Heim Joints


There is also a good range of Rod Ends - Steel - Nylon Raceway - Male on the Small Parts and Bearings website.


Rod Ends - Stainless Steel - Bronze Lined - Male
Rod Ends - Stainless Steel - Bronze Lined - Male

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.

There is also a good range of Rod Ends - Stainless Steel - Bronze Lined - Male on the Small Parts and Bearings website.


Yoke Ends - Threaded
Yoke Ends - Threaded

Also see combined categories:
All Yoke Ends

Linkage Connectors

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:

There is also a good range of Yoke Ends - Threaded on the Small Parts and Bearings website.


Rod Ends - Steel - Bronze Lined - Female
Rod Ends - Steel - Bronze Lined - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Steel - Bronze Lined - Female on the Small Parts and Bearings website.


Rod Ends - Steel - Bronze Lined - Male
Rod Ends - Steel - Bronze Lined - Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Steel - Bronze Lined - Male on the Small Parts and Bearings website.


Washers - Disc Spring - Flange Locking Type
Washers - Disc Spring - Flange Locking Type

Also see combined categories:
All Disc Springs

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock. Also known as belleville washers.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.

There is also a good range of Washers - Disc Spring - Flange Locking Type on the Small Parts and Bearings website.


Rod Ends - Plastic - Female
Rod Ends - Plastic - Female

Also see combined categories:
All Female Rod Ends

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Plastic - Female on the Small Parts and Bearings website.


Rod Ends - Plastic - Male
Rod Ends - Plastic - Male

Also see combined categories:
All Male Rod Ends

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Plastic - Male on the Small Parts and Bearings website.


Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female

Also see combined categories:
All Female Rod Ends
All Stainless Steel Female Rod Ends

Also known as Heim Joints


There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female on the Small Parts and Bearings website.


Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Also known as Heim Joints


There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male on the Small Parts and Bearings website.


Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female
Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female

Also see combined categories:
All Female Rod Ends
All Stainless Steel Female Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female on the Small Parts and Bearings website.


Rod Ends - Steel - Stamped - Female
Rod Ends - Steel - Stamped - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Economy stamped style combines high strength with low cost. Also known as Heim Joints

Made from low carbon steel and plated for corrosion resistance. Ball is case hardened.

There is also a good range of Rod Ends - Steel - Stamped - Female on the Small Parts and Bearings website.


Yoke Ends - Blank
Yoke Ends - Blank

Also see combined categories:
All Yoke Ends

Linkage Connectors with blank ends - no hole

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:

There is also a good range of Yoke Ends - Blank on the Small Parts and Bearings website.


Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male
Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Tight fit (Minimal ball clearance). Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male on the Small Parts and Bearings website.


Rod Ends - Steel - PTFE Lined - Tight Fit - Female
Rod Ends - Steel - PTFE Lined - Tight Fit - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit - Female on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122209 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122209 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.