Universal Joints Single Categories
Universal Joints - Single Joint - High Speed - Bored and Keyed
Carbon Steel. With keyway. Maximum operating angle 25 to 45 degrees (refer tables).
Related Information:
There is also a good range of Universal Joints - Single Joint - High Speed - Bored and Keyed on the Small Parts and Bearings website.
Universal Joints - Single Joint - High Speed - Plain Bore
Carbon Steel. Maximum operating angle 25 to 45 degrees (refer tables).
Related Information:
There is also a good range of Universal Joints - Single Joint - High Speed - Plain Bore on the Small Parts and Bearings website.
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.
Related Information:
There is also a good range of Universal Joints - Single Joint - High Speed - Plain Bore - Stainless on the Small Parts and Bearings website.
Universal Joints - Single Joint - High Speed - Solid
Carbon Steel. Unbored. Maximum operating angle 25 to 45 degrees (refer tables).
Related Information:
There is also a good range of Universal Joints - Single Joint - High Speed - Solid on the Small Parts and Bearings website.
You may also be interested in
Universal Joint Covers
Covers - Universal Joint - Elasticate Rubber
For Single and Double Universal Joints.
-27 oC to 70 Deg C temp range (constant). -32 oC to 120 Deg C temp range (intermittent).
Related Information:
There is also a good range of Covers - Universal Joint - Elasticate Rubber on the Small Parts and Bearings website.
Universal Joints Double
Universal Joints - Double Joint - Hobby
C45 Carbon Steel. Maximum operating angle 60 degree. Slow speed only.
There is also a good range of Universal Joints - Double Joint - Hobby on the Small Parts and Bearings website.
Universal Joints Telescoping
Universal Joints - Telescoping - Plastic - Brass Spider and Insert
Acetal plastic telescoping universal joints with nickle plated brass spiders and bore inserts
There is also a good range of Universal Joints - Telescoping - Plastic - Brass Spider and Insert on the Small Parts and Bearings website.
Cross Blocks
Joints - Swivel - Miniature - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Miniature - Steel on the Small Parts and Bearings website.
Joints - Swivel - Knob Style - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Knob Style - Steel on the Small Parts and Bearings website.
Joints - Swivel - Split Type - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Split Type - Steel on the Small Parts and Bearings website.
Joints - Swivel - Tee Handle - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Tee Handle - Steel on the Small Parts and Bearings website.
Joints - Swivel - Wing Knob - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Wing Knob - Steel on the Small Parts and Bearings website.
Joints - Swivel - Double Wing Knob - Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.
There is also a good range of Joints - Swivel - Double Wing Knob - Steel on the Small Parts and Bearings website.
Joints - Swivel - Knob Style - Stainless Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.
There is also a good range of Joints - Swivel - Knob Style - Stainless Steel on the Small Parts and Bearings website.
Joints - Swivel - Wing Knob - Stainless Steel
Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.
There is also a good range of Joints - Swivel - Wing Knob - Stainless Steel on the Small Parts and Bearings website.
Mounts - Universal - For Acme Thread and Ballscrews
Use grade 8 hex socket head cap screws for mounting.
Related Information:
There is also a good range of Mounts - Universal - For Acme Thread and Ballscrews on the Small Parts and Bearings website.
80T Single Speed Penn Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of 80T Single Speed Penn Parts on the Small Parts and Bearings website.
R Clips - Single Coil - Stainless Steel
Also known as internal hitch pins, bridge pins or humpback pins
There is also a good range of R Clips - Single Coil - Stainless Steel on the Small Parts and Bearings website.
R Clips - Single Coil - Steel
Also known as internal hitch pins, bridge pins or humpback pins
There is also a good range of R Clips - Single Coil - Steel on the Small Parts and Bearings website.
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
There is also a good range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls on the Small Parts and Bearings website.
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
There is also a good range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls on the Small Parts and Bearings website.
Bearings - Acetal - Single Row - with Glass Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
There is also a good range of Bearings - Acetal - Single Row - with Glass Balls on the Small Parts and Bearings website.
Snap Buttons - Single End - Dog Leg
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.
There is also a good range of Snap Buttons - Single End - Dog Leg on the Small Parts and Bearings website.
Snap Buttons - Single End - Spring Leg
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.
There is also a good range of Snap Buttons - Single End - Spring Leg on the Small Parts and Bearings website.
Sprockets - Miniature - Single Row - Steel
25-1 ASA 1/4 Inch. With unfinished bore. Economy for hobbies.
Match with miniature 6.35mm simplex chain. American Standard ASA25-1 - 1/4 inch.
Related Information:
Tensioner - Drive - Single Adjusting - Shaft Mount
Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360o.
Idler shaft and pulleys not included with tensioner.
Related Information:
There is also a good range of Tensioner - Drive - Single Adjusting - Shaft Mount on the Small Parts and Bearings website.
Shaftloc-tm Sleeves - Single Ended
Simple effective way to lock components onto shafts.
416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.
Related Information:
There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.
Pins - Side Thrust - Single Sided - Plastic Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Plastic ball and stainless spring with black oxide coated steel body.
Related Information:
There is also a good range of Pins - Side Thrust - Single Sided - Plastic Ball on the Small Parts and Bearings website.
Pins - Side Thrust - Single Sided - Stainless Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Stainless ball and stainless spring with black oxide coated steel body.
Related Information:
There is also a good range of Pins - Side Thrust - Single Sided - Stainless Ball on the Small Parts and Bearings website.
Pins - Side Thrust - Single Sided - Steel Ball
For holding, clamping and positioning work pieces. Body is black oxide steel.
Steel ball and elasticised spring with black oxide coated steel body.
Related Information:
There is also a good range of Pins - Side Thrust - Single Sided - Steel Ball on the Small Parts and Bearings website.
Hubs - Gear and Dial - Single
Fairloctm Hubs require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.
Related Information:
There is also a good range of Hubs - Gear and Dial - Single on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Single Wire - Trapezoid - Carbon Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Single Wire - Trapezoid - Carbon Steel on the Small Parts and Bearings website.
Pulleys - Vee - A - 4L - Single Row - For QD Bushing
Cast iron pulleys. QD bushings are used to vary the bore sizes.
Related Information:
There is also a good range of Pulleys - Vee - A - 4L - Single Row - For QD Bushing on the Small Parts and Bearings website.
Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium
Stenco vee pulleys
Related Information:
There is also a good range of Pulleys - Vee - A - 4L - Single Row - Through Bore - Aluminium on the Small Parts and Bearings website.
Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron
Dual purpose pulleys suit A section and M section belts
To determine the pitch diameter for M section deduct 8.636mm (0.34 inch) from the pitch diameter listed.
Related Information:
There is also a good range of Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron on the Small Parts and Bearings website.
Pulleys - Vee - B - 5L - Single Row - For QD Bushing
Cast iron pulleys. QD bushings are used to vary the bore sizes.
Related Information:
There is also a good range of Pulleys - Vee - B - 5L - Single Row - For QD Bushing on the Small Parts and Bearings website.
Pulleys - Vee - M - 3L - Single Row - Through Bore - Aluminium
Stenco vee pulleys
Related Information:
There is also a good range of Pulleys - Vee - M - 3L - Single Row - Through Bore - Aluminium on the Small Parts and Bearings website.
Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron
Dual purpose pulleys suit A section and M section belts
To determine the pitch diameter for A section add 8.636mm (0.34 inch) to the pitch diameter listed.
Related Information:
There is also a good range of Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron on the Small Parts and Bearings website.
Bearings - Conveyor - Hex Bore - Plastic - Single Row
Plastic hex bore conveyor bearings with 316 stainless balls
Loads and Speeds are for reference only. Testing recommended.
There is also a good range of Bearings - Conveyor - Hex Bore - Plastic - Single Row on the Small Parts and Bearings website.
Bearings - Ball - 440C Stainless
Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
Stainless steel radial ball bearings
Standard single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
There is also a good range of Bearings - Ball - 440C Stainless on the Small Parts and Bearings website.
Bearings - Ball - Chrome Steel
Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome
Chrome steel radial ball bearings.
Standard single row radial ball bearings. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.
Related Information:
There is also a good range of Bearings - Ball - Chrome Steel on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Open
Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Open on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Small Parts and Bearings website.
Bearings - Ball - 316 Stainless Steel - Single Row - Shielded
Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
There is also a good range of Bearings - Ball - 316 Stainless Steel - Single Row - Shielded on the Small Parts and Bearings website.
Mounts - Leveling - Nylathane - Studded Type - Single Lag Hole
Max load 3200kg. Adjusters.
Related Information:
There is also a good range of Mounts - Leveling - Nylathane - Studded Type - Single Lag Hole on the Small Parts and Bearings website.
Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row
316 stainless conveyor bearings with plastic cage and plastic hex insert
Loads and Speeds are for reference only. Testing recommended.
There is also a good range of Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row on the Small Parts and Bearings website.
Bearings - Ball - High Speed Cage
This product group includes bearings with cages for high speed applications, including phenolic, nylon and polyamide.
Bearings in this group have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. See individual datasheets, available on request. Items with high speed cages usually have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.
Related Information:
There is also a good range of Bearings - Ball - High Speed Cage on the Small Parts and Bearings website.
Bearings - Ball - Semi-Ground - Sealed
Radial ball bearings. This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127
There is also a good range of Bearings - Ball - Semi-Ground - Sealed on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125365 products in 2297 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
