Tools Screw Extractors Categories
Tools - Screw Extractors
The quick and easy way to remove broken screws, bolts, pipes and studs.
Note! You will also need a drill bit of the correct size for each extractor.
There is also a good range of Tools - Screw Extractors on the Small Parts and Bearings website.
Screws - Security - Socket - Tools
Only available to users of the Socket Type Security Screws. Metric only.
Used for hex socket security screws.
Related Information:
There is also a good range of Screws - Security - Socket - Tools on the Small Parts and Bearings website.
Screws - Security - Post Combi Square - Tools
Metric only.
Used for two hole security screws.
Related Information:
There is also a good range of Screws - Security - Post Combi Square - Tools on the Small Parts and Bearings website.
Screws - Shoulder - Jig and Fixture - Steel
Used in construction of tool, jig and fixture work. 4140L heat treated steel with black oxide finish.
Also known as stripper bolts.
There is also a good range of Screws - Shoulder - Jig and Fixture - Steel on the Small Parts and Bearings website.
Screws - Security - Button - Socket
Metric only.
Use special tool listed under Screws - Security - Socket - Tools..
Related Information:
There is also a good range of Screws - Security - Button - Socket on the Small Parts and Bearings website.
Screws - Security - Cap - Socket
Metric only.
Use special tool listed under Screws - Security - Socket - Tools..
Related Information:
There is also a good range of Screws - Security - Cap - Socket on the Small Parts and Bearings website.
Tools - Thread Repair
Quickly repairs damaged screws
Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.
There is also a good range of Tools - Thread Repair on the Small Parts and Bearings website.
Screws - Security - Socket - Countersunk - Stainless
Metric only.
Use special tool listed under Screws - Security - Socket - Tools..
Related Information:
There is also a good range of Screws - Security - Socket - Countersunk - Stainless on the Small Parts and Bearings website.
Screws - Security - Socket - Countersunk - Zinc Plated
Metric only.
Use special tool listed under Screws - Security - Socket - Tools..
Related Information:
There is also a good range of Screws - Security - Socket - Countersunk - Zinc Plated on the Small Parts and Bearings website.
Tools - Nut Drivers
Includes socket wrench for 0-80 size screws
Lengths shown are based on standard stock but may vary.
There is also a good range of Tools - Nut Drivers on the Small Parts and Bearings website.
Screws - Security - Post Combi Square - Pan Head - Super Zinc
Each 200 pack comes with a Post Combination Driver Bit. Metric only.
Use special tool listed under Screws - Securty - Socket - Tools.
Related Information:
There is also a good range of Screws - Security - Post Combi Square - Pan Head - Super Zinc on the Small Parts and Bearings website.
Inserts - Thread Repair - Recoil Starter Sets
Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.
Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.
There is also a good range of Inserts - Thread Repair - Recoil Starter Sets on the Small Parts and Bearings website.
Tools - General
Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits
X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more.
There is also a good range of Tools - General on the Small Parts and Bearings website.
Inserts - Thread Repair - Helicoil Tang Breakoff Tools
The driving tangs of helicoil inserts must be removed to prevent interference with the end of the assembled screw. For inserts over 1/2 inch use long nosed pliers.
There is also a good range of Inserts - Thread Repair - Helicoil Tang Breakoff Tools on the Small Parts and Bearings website.
Tools - Mandrels and Nosepieces - For Klik Rivet Nuts
Required for Thread Setter Tool
Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.
Related Information:
There is also a good range of Tools - Mandrels and Nosepieces - For Klik Rivet Nuts on the Small Parts and Bearings website.
Balls - Tooling - Two Piece - Construction - Steel
High quality tooling balls provide a precise reference point for critical machining operations.
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft. Construction balls can be pulled into a hole or bushing from below without applying pressure on the ball by using a cap screw in the internally tapped shank.
Related Information:
There is also a good range of Balls - Tooling - Two Piece - Construction - Steel on the Small Parts and Bearings website.
Inserts - Thread Repair - Helicoil
Replacement helicoil inserts for after you have purchased a starter kit or tools separately.
Stainless 18-8 inserts with a hardness of RC43-50 and tensile strength above 200,000 PSI. Metric and Imperial available. Screw locking inserts have a series of straight segments to provide self-locking torque on the bolt, eliminating a need for other threadlocking methods.
There is also a good range of Inserts - Thread Repair - Helicoil on the Small Parts and Bearings website.
Inserts - Self Tapping - For Plastics - Stainless Steel
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Standard made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.
Related Information:
There is also a good range of Inserts - Self Tapping - For Plastics - Stainless Steel on the Small Parts and Bearings website.
Inserts - Self Tapping - For Wood - Slotted Drive
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.
Related Information:
There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive on the Small Parts and Bearings website.
Inserts - Self Tapping - For Plastics - Steel
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.
Related Information:
There is also a good range of Inserts - Self Tapping - For Plastics - Steel on the Small Parts and Bearings website.
Inserts - Self Tapping - For Aluminium - Steel
Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.
Related Information:
There is also a good range of Inserts - Self Tapping - For Aluminium - Steel on the Small Parts and Bearings website.
Inserts - Self Tapping - For Aluminium - Stainless 303
Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.
Related Information:
There is also a good range of Inserts - Self Tapping - For Aluminium - Stainless 303 on the Small Parts and Bearings website.
Tools - Sets
General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.
There is also a good range of Tools - Sets on the Small Parts and Bearings website.
Inserts - Rivet Nuts - Klik - Threadsert
Individual Inserts for use with the Klik Thread Setter Tool
These threaded inserts can be used in blind or through hole applications. Can be used in almost any material over 2.38mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material. Can be pressed or otherwise compressed manually with a hammer for quick installation jobs in sheet material. Tools are available for assembly in blind holes or production assembly. Email us for a price on tools.
There is also a good range of Inserts - Rivet Nuts - Klik - Threadsert on the Small Parts and Bearings website.
Bits - Power
Power bits for use with power screwdrivers and drills
There is also a good range of Bits - Power on the Small Parts and Bearings website.
Screws - Roof Bolt - Steel
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Roof Bolt - Steel on the Small Parts and Bearings website.
Screws - Hex Head - Steel - Zinc Plated
BSW and METRIC - Bolts
Related Information:
There is also a good range of Screws - Hex Head - Steel - Zinc Plated on the Small Parts and Bearings website.
Screws - Shoulder - Slotted Shallow Head - Carbon Steel
Also known as stripper bolts.
There is also a good range of Screws - Shoulder - Slotted Shallow Head - Carbon Steel on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - 303 Stainless
Also known as stripper bolts.
There is also a good range of Screws - Shoulder - Socket Head - 303 Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - 416 Stainless
Also known as stripper bolts.
There is also a good range of Screws - Shoulder - Socket Head - 416 Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - Carbon Steel
Also known as stripper bolts.
There is also a good range of Screws - Shoulder - Socket Head - Carbon Steel on the Small Parts and Bearings website.
Screws - Shoulder - Slotted Head - Stainless
303 Stainless Steel
Also known as stripper bolts.
There is also a good range of Screws - Shoulder - Slotted Head - Stainless on the Small Parts and Bearings website.
Screws - Thumb - 1-4 Turn
Related Information:
There is also a good range of Screws - Thumb - 1-4 Turn on the Small Parts and Bearings website.
Screws - Thumb - Dog Point
Related Information:
There is also a good range of Screws - Thumb - Dog Point on the Small Parts and Bearings website.
Screws - Thumb - Flat Key Head - Nylon
Related Information:
There is also a good range of Screws - Thumb - Flat Key Head - Nylon on the Small Parts and Bearings website.
Screws - Thumb - Flat Key Head - Steel
Related Information:
There is also a good range of Screws - Thumb - Flat Key Head - Steel on the Small Parts and Bearings website.
Screws - Thumb - Flat Key Head - Washer Face - Steel
Flat Key head malleable iron screws with an integral washer
Related Information:
There is also a good range of Screws - Thumb - Flat Key Head - Washer Face - Steel on the Small Parts and Bearings website.
Screws - Thumb - Flat Tip
Related Information:
There is also a good range of Screws - Thumb - Flat Tip on the Small Parts and Bearings website.
Screws - Thumb - Half Turn
Related Information:
There is also a good range of Screws - Thumb - Half Turn on the Small Parts and Bearings website.
Screws - Thumb - Knurled - Brass
Brass knurled head thumb screws with zinc or black oxide protective coating.
Related Information:
There is also a good range of Screws - Thumb - Knurled - Brass on the Small Parts and Bearings website.
Screws - Thumb - Knurled - Nylon
Nylon knurled head thumb screws
Related Information:
There is also a good range of Screws - Thumb - Knurled - Nylon on the Small Parts and Bearings website.
Screws - Thumb - Knurled - Stainless
Stainless steel knurled head thumb screws
Related Information:
There is also a good range of Screws - Thumb - Knurled - Stainless on the Small Parts and Bearings website.
Screws - Thumb - Knurled - Stainless - Precision Head
Related Information:
There is also a good range of Screws - Thumb - Knurled - Stainless - Precision Head on the Small Parts and Bearings website.
Screws - Thumb - Knurled - Stainless - Slim Head
Related Information:
There is also a good range of Screws - Thumb - Knurled - Stainless - Slim Head on the Small Parts and Bearings website.
Screws - Thumb - Knurled - Steel
Steel knurled head thumb screws
Related Information:
There is also a good range of Screws - Thumb - Knurled - Steel on the Small Parts and Bearings website.
Screws - Thumb - Knurled - Washer Face - Brass
Knurled head brass thumb screws with an integral washer
Related Information:
There is also a good range of Screws - Thumb - Knurled - Washer Face - Brass on the Small Parts and Bearings website.
Screws - Thumb - Knurled - Washer Face - Nylon
Knurled head nylon thumb screws with an integral washer
Related Information:
There is also a good range of Screws - Thumb - Knurled - Washer Face - Nylon on the Small Parts and Bearings website.
Screws - Thumb - Knurled - Washer Face - Stainless Steel
Knurled head stainless steel thumb screws with an integral washer
Related Information:
There is also a good range of Screws - Thumb - Knurled - Washer Face - Stainless Steel on the Small Parts and Bearings website.
Screws - Thumb - Nylon Tip
Soft nylon tip to help prevent damage to parts being locked.
Related Information:
There is also a good range of Screws - Thumb - Nylon Tip on the Small Parts and Bearings website.
Screws - Thumb - Shoulder
303 Stainless Steel
Related Information:
There is also a good range of Screws - Thumb - Shoulder on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125387 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
