Tools Pullers Categories
Tools - Pullers - Dowel Remover and Setter
Designed for removing and setting any pull dowel up to 25.40mm.
Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set.
Related Information:
There is also a good range of Tools - Pullers - Dowel Remover and Setter on the Small Parts and Bearings website.
Tools - Installation - Spring Locating Pin
Installation tools designed to ease installation of spring locating pins.
There is also a good range of Tools - Installation - Spring Locating Pin on the Small Parts and Bearings website.
Tools - Installation - Indexing Plunger
Two slots provided in the upper end of the body and are accessible when the knob is in the retracted position. For use with WIP type plungers.
There is also a good range of Tools - Installation - Indexing Plunger on the Small Parts and Bearings website.
Tools - Thread Insert - Power Drive - EZ-Lok
Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.
There is also a good range of Tools - Thread Insert - Power Drive - EZ-Lok on the Small Parts and Bearings website.
Tool Steel - 496 Oil Hardening - Flat Stock
General purpose tool steel with good wear resistance, durability and machinability
Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).
There is also a good range of Tool Steel - 496 Oil Hardening - Flat Stock on the Small Parts and Bearings website.
Tools - Keys - Hex
Long and short series allen keys.
Alloy Steel Heat Treated. Short Arm DIN 911. Long Arm ANSI B18.3 1986.
There is also a good range of Tools - Keys - Hex on the Small Parts and Bearings website.
Tools - Punches - Pilot
Vanadium Steel. Tolerance is +0.000 / -0.254mm
There is also a good range of Tools - Punches - Pilot on the Small Parts and Bearings website.
Tools - Punches - Pilot - Sets
Vanadium Steel. Tolerance is +0.000 / -0.254mm
There is also a good range of Tools - Punches - Pilot - Sets on the Small Parts and Bearings website.
Tools - Sets
General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.
There is also a good range of Tools - Sets on the Small Parts and Bearings website.
Tools - Sets - Foldup
Handy sets of popular sized hex and torx wrenches.
Highest quality 8650 chrome nickel alloy heat treated and finished to resist rust. Ergo style has colour coded handles. Classic style has one piece steel grip handle. Conveniently folds up like a jack knife when not in use.
There is also a good range of Tools - Sets - Foldup on the Small Parts and Bearings website.
Tools - Tubing Work
Tube benders and cutters
Related Information:
There is also a good range of Tools - Tubing Work on the Small Parts and Bearings website.
Tools - Wire Working
For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.
Related Information:
There is also a good range of Tools - Wire Working on the Small Parts and Bearings website.
Tools - Circlip Pliers - External
Also see combined categories:
All Tools
All Tools
External circlip pliers including standard and ratchet type.
Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.
There is also a good range of Tools - Circlip Pliers - External on the Small Parts and Bearings website.
Tools - Circlip Pliers - Internal
Also see combined categories:
All Tools
All Tools
Internal circlip pliers including standard and ratchet type.
Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.
There is also a good range of Tools - Circlip Pliers - Internal on the Small Parts and Bearings website.
Tools - Circlip Pliers - Reversible
Also see combined categories:
All Tools
All Tools
Reversible circlip pliers for internal and external circlips.
Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.
There is also a good range of Tools - Circlip Pliers - Reversible on the Small Parts and Bearings website.
Tools - E-Clip Applicators
Also see combined categories:
All Tools
All Tools
Assists with assembly e-clip application. Each tool is designed to suit one or two sizes only.
There is also a good range of Tools - E-Clip Applicators on the Small Parts and Bearings website.
Tools - Drill Bits
Micro miniature drill bits starting from 0.32mm up to larger standard sizes. Sutton - PN - Bordo.
Lengths shown are based on standard stock but may vary.
There is also a good range of Tools - Drill Bits on the Small Parts and Bearings website.
Tools - Drill Bits - Reduced Shank
Reduced Shanked Drill Bits
There is also a good range of Tools - Drill Bits - Reduced Shank on the Small Parts and Bearings website.
Tools - Files
Files and file sets. File card brush. Needle files.
Lengths shown are based on standard stock but may vary.
There is also a good range of Tools - Files on the Small Parts and Bearings website.
Tools - Rotary Files - Aluminium Cut
Used for deburring and smoothing metals.
Made from Heat treated steel.
There is also a good range of Tools - Rotary Files - Aluminium Cut on the Small Parts and Bearings website.
Tools - Rotary Files - Double Cut
Used for deburring and smoothing metals.
Made from Heat treated steel.
There is also a good range of Tools - Rotary Files - Double Cut on the Small Parts and Bearings website.
Tools - Rotary Files - Standard Cut
Used for deburring and smoothing metals.
Made from Heat treated steel.
There is also a good range of Tools - Rotary Files - Standard Cut on the Small Parts and Bearings website.
Tools - Deburring
There is also a good range of Tools - Deburring on the Small Parts and Bearings website.
Tools - Chain Breaker
Used to break roller chain at the pins
There is also a good range of Tools - Chain Breaker on the Small Parts and Bearings website.
Tools - Drills
Hobby drill for very small bits.
There is also a good range of Tools - Drills on the Small Parts and Bearings website.
Tools - General
Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits
X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more.
There is also a good range of Tools - General on the Small Parts and Bearings website.
Tools - Nut Drivers
Includes socket wrench for 0-80 size screws
Lengths shown are based on standard stock but may vary.
There is also a good range of Tools - Nut Drivers on the Small Parts and Bearings website.
Tools - Pin Vises
Lengths shown are based on standard stock but may vary.
There is also a good range of Tools - Pin Vises on the Small Parts and Bearings website.
Tools - Reamers - Tapered - Hand
Tapered reamers for taper pin holes
There is also a good range of Tools - Reamers - Tapered - Hand on the Small Parts and Bearings website.
Tools - Tweezers
Selection of tweezers for those fiddly jobs.
There is also a good range of Tools - Tweezers on the Small Parts and Bearings website.
Tools - Thread Gauge
Various types of gauges to help with identification of threads.
There is also a good range of Tools - Thread Gauge on the Small Parts and Bearings website.
Tools - Screw Extractors
The quick and easy way to remove broken screws, bolts, pipes and studs.
Note! You will also need a drill bit of the correct size for each extractor.
There is also a good range of Tools - Screw Extractors on the Small Parts and Bearings website.
Tools - Die Holders
Bar and round holders. 16mm, 20.64mm and 25.4mm (inch). Also called a button die stock.
There is also a good range of Tools - Die Holders on the Small Parts and Bearings website.
Tools - Die Nuts
Tungsten Chrome Alloy - Carbon Steel die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
There is also a good range of Tools - Die Nuts on the Small Parts and Bearings website.
Tools - Dies - Carbon Steel
Tungsten Chrome Alloy - Carbon Steel Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
There is also a good range of Tools - Dies - Carbon Steel on the Small Parts and Bearings website.
Tools - Dies - High Speed Steel
High Speed Steel Button Dies
There is also a good range of Tools - Dies - High Speed Steel on the Small Parts and Bearings website.
Tools - Installation - For Self Tapping Inserts
Installation tools for self tapping thread inserts - see the linked inserts categories
Related Information:
There is also a good range of Tools - Installation - For Self Tapping Inserts on the Small Parts and Bearings website.
Tools - Mandrels and Nosepieces - For Klik Rivet Nuts
Required for Thread Setter Tool
Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.
Related Information:
There is also a good range of Tools - Mandrels and Nosepieces - For Klik Rivet Nuts on the Small Parts and Bearings website.
Tools - Taps - Carbon Steel - Hand
Carbon Steel Straight Flute Taps. Starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
Carbon steel hand taps. Carbon Steel (CS) Hand taps.
There is also a good range of Tools - Taps - Carbon Steel - Hand on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - Extension
Intermediate small shank spiral point extension taps 150mm long
There is also a good range of Tools - Taps - High Speed Steel - Extension on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - Hand
High Speed Steel Short Machine Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
High Speed Steel (HSS) Short Machine taps.
There is also a good range of Tools - Taps - High Speed Steel - Hand on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - Hand - Sets
Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set
High Speed Steel (HSS) Short Machine taps. Older stock is Triangle Brand (UK). Newer stock is Volkel Brand (German).
There is also a good range of Tools - Taps - High Speed Steel - Hand - Sets on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - Helicoil
Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.
There is also a good range of Tools - Taps - High Speed Steel - Helicoil on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - NPT Pipe
Taper Pipe Taps
There is also a good range of Tools - Taps - High Speed Steel - NPT Pipe on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - NPT Pipe - Interrupted
Taper Pipe Taps
There is also a good range of Tools - Taps - High Speed Steel - NPT Pipe - Interrupted on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide
Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. 37o helix.
There is also a good range of Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - Spiral Point
Metric intermediate ground thread high speed steel taps. Also called gun taps.
There is also a good range of Tools - Taps - High Speed Steel - Spiral Point on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - Spiral Point - Premium
Premium spiral point intermediate taps in UNC and UNF. Also called gun taps.
There is also a good range of Tools - Taps - High Speed Steel - Spiral Point - Premium on the Small Parts and Bearings website.
Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide
Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. Also called gun taps.
There is also a good range of Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide on the Small Parts and Bearings website.
Tools - Tap Wrenches
Tee handle and bar types. Suit taps from 1mm to 12mm.
There is also a good range of Tools - Tap Wrenches on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125388 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
