Tools Cutting Categories

Tools - Cutting - Hobby

Also see combined categories:
All Tools

Knives and blades, cutting mats, saws, sidecutters

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Cutting - Hobby.

Tools - Drill Bits

Also see combined categories:
All Tools

Extensive range of drill bits, from larger standard sizes down to as small as 0.32mm micro miniature sizes. Sutton - PN - Bordo.

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Drill Bits.

There is also a good range of Tools - Drill Bits on the Small Parts and Bearings website.

Tools - Drill Bits - Reduced Shank

Reduced Shanked Drill Bits

This category may be available in the new MBA online store at Tools - Drill Bits - Reduced Shank.

There is also a good range of Tools - Drill Bits - Reduced Shank on the Small Parts and Bearings website.

Tools - Rotary Files - Aluminium Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Aluminium Cut.

There is also a good range of Tools - Rotary Files - Aluminium Cut on the Small Parts and Bearings website.

Tools - Rotary Files - Double Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Double Cut.

There is also a good range of Tools - Rotary Files - Double Cut on the Small Parts and Bearings website.

Tools - Rotary Files - Standard Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Standard Cut.

There is also a good range of Tools - Rotary Files - Standard Cut on the Small Parts and Bearings website.

You may also be interested in

Fastening Bushings

Bushings - Drill - Liner Type - Headless

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.

Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Liner Type - Headless.

There is also a good range of Bushings - Drill - Liner Type - Headless on the Small Parts and Bearings website.

Bushings - Drill - Press-fit - Headless

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.

Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Press-fit - Headless.

There is also a good range of Bushings - Drill - Press-fit - Headless on the Small Parts and Bearings website.

Bushings - Drill - Slip - With Head

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.

There is also a good range of Bushings - Drill - Slip - With Head on the Small Parts and Bearings website.

Bushings - Drill - Press-fit - Standard Head

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.

Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Press-fit - Standard Head.

There is also a good range of Bushings - Drill - Press-fit - Standard Head on the Small Parts and Bearings website.

Bushings - Drill - Press-fit - Headless - Tungsten Carbide

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig.

Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 67-69. This category may be available in the new MBA online store at Bushings - Drill - Press-fit - Headless - Tungsten Carbide.

There is also a good range of Bushings - Drill - Press-fit - Headless - Tungsten Carbide on the Small Parts and Bearings website.

Gears - Blanks

Blanks for cutting gears and pulleys and friction drives.

This category may be available in the new MBA online store at Gears - Blanks.

There is also a good range of Gears - Blanks on the Small Parts and Bearings website.

Rod - Drill Blanks

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc. This category may be available in the new MBA online store at Rod - Drill Blanks.

There is also a good range of Rod - Drill Blanks on the Small Parts and Bearings website.

Screws - Self Tapping - For Soft Plastics - Pan Head

Also see combined categories:
All Self Tapping Screws
All Self Tapping Screws for Plastics

Tri-Lobe Course Thread Plastic Threading Screws

Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting. This category may be available in the new MBA online store at Screws - Self Tapping - For Soft Plastics - Pan Head.

There is also a good range of Screws - Self Tapping - For Soft Plastics - Pan Head on the Small Parts and Bearings website.

Tools - Installation - Indexing Plunger

Also see combined categories:
All Tools

Two slots provided in the upper end of the body and are accessible when the knob is in the retracted position. For use with WIP type plungers.

This category may be available in the new MBA online store at Tools - Installation - Indexing Plunger.

There is also a good range of Tools - Installation - Indexing Plunger on the Small Parts and Bearings website.

Tools - Thread Insert - Power Drive - EZ-Lok

Also see combined categories:
All Tools

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.

This category may be available in the new MBA online store at Tools - Thread Insert - Power Drive - EZ-Lok.

There is also a good range of Tools - Thread Insert - Power Drive - EZ-Lok on the Small Parts and Bearings website.

Tools - Keys - Hex

Also see combined categories:
All Tools

Long and short series allen keys.

Alloy Steel Heat Treated. Short Arm DIN 911. Long Arm ANSI B18.3 1986. This category may be available in the new MBA online store at Tools - Keys - Hex.

There is also a good range of Tools - Keys - Hex on the Small Parts and Bearings website.

Tools - Sets

Also see combined categories:
All Tools

General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.

This category may be available in the new MBA online store at Tools - Sets.

There is also a good range of Tools - Sets on the Small Parts and Bearings website.

Tools - Sets - Foldup

Also see combined categories:
All Tools

Handy sets of popular sized hex and torx wrenches.

Highest quality 8650 chrome nickel alloy heat treated and finished to resist rust. Ergo style has colour coded handles. Classic style has one piece steel grip handle. Conveniently folds up like a jack knife when not in use. This category may be available in the new MBA online store at Tools - Sets - Foldup.

There is also a good range of Tools - Sets - Foldup on the Small Parts and Bearings website.

Tools - Tubing Work

Also see combined categories:
All Tools

Tube benders and cutters

This category may be available in the new MBA online store at Tools - Tubing Work.

Related Information:

Brass Tube

Stainless Tube

Aluminium Tube

There is also a good range of Tools - Tubing Work on the Small Parts and Bearings website.

Tools - Circlip Pliers - External

Also see combined categories:
All Tools

External circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - External.

There is also a good range of Tools - Circlip Pliers - External on the Small Parts and Bearings website.

Tools - Circlip Pliers - Internal

Also see combined categories:
All Tools

Internal circlip pliers including standard and ratchet type.

There is also a good range of Tools - Circlip Pliers - Internal on the Small Parts and Bearings website.

Tools - Circlip Pliers - Reversible

Also see combined categories:
All Tools

Reversible circlip pliers for internal and external circlips.

There is also a good range of Tools - Circlip Pliers - Reversible on the Small Parts and Bearings website.

Tools - E-Clip Applicators

Also see combined categories:
All Tools

Assists with assembly e-clip application. Each tool is designed to suit one or two sizes only. This category may be available in the new MBA online store at Tools - E-Clip Applicators.

There is also a good range of Tools - E-Clip Applicators on the Small Parts and Bearings website.

Tools - General

Also see combined categories:
All Tools

Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits

X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more. This category may be available in the new MBA online store at Tools - General.

There is also a good range of Tools - General on the Small Parts and Bearings website.

Tools - Nut Drivers

Also see combined categories:
All Tools

Includes socket wrench for 0-80 size screws

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Nut Drivers.

There is also a good range of Tools - Nut Drivers on the Small Parts and Bearings website.

Tools - Paint

Also see combined categories:
All Tools

Includes airbrush, compressor, brushes, paint stand and alligator clips.

This category may be available in the new MBA online store at Tools - Paint.

There is also a good range of Tools - Paint on the Small Parts and Bearings website.

Tools - Pin Vises

Also see combined categories:
All Tools

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Pin Vises.

There is also a good range of Tools - Pin Vises on the Small Parts and Bearings website.

Tools - Punches

Also see combined categories:
All Tools

Number punch and letter punch sets

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Punches.

There is also a good range of Tools - Punches on the Small Parts and Bearings website.

Tools - Wrenches

Also see combined categories:
All Tools

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Wrenches.

There is also a good range of Tools - Wrenches on the Small Parts and Bearings website.

Tools - Pullers - Dowel Remover and Setter

Also see combined categories:
All Tools

Designed for removing and setting any pull dowel up to 25.40mm.

Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set. This category may be available in the new MBA online store at Tools - Pullers - Dowel Remover and Setter.

Related Information:

Extractable Dowel Pins

Extractable Taper Pins

Dowel Pins Catalogue PDF

There is also a good range of Tools - Pullers - Dowel Remover and Setter on the Small Parts and Bearings website.

Tools - Screw Extractors

Also see combined categories:
All Tools

The quick and easy way to remove broken screws, bolts, pipes and studs.

Note! You will also need a drill bit of the correct size for each extractor. This category may be available in the new MBA online store at Tools - Screw Extractors.

There is also a good range of Tools - Screw Extractors on the Small Parts and Bearings website.

Tools - Die Holders

Also see combined categories:
All Tools

Bar and round holders. 16mm, 20.64mm and 25.4mm (inch). Also called a button die stock.

This category may be available in the new MBA online store at Tools - Die Holders.

There is also a good range of Tools - Die Holders on the Small Parts and Bearings website.

Tools - Die Nuts

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

This category may be available in the new MBA online store at Tools - Die Nuts.

There is also a good range of Tools - Die Nuts on the Small Parts and Bearings website.

Tools - Dies - Carbon Steel

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

This category may be available in the new MBA online store at Tools - Dies - Carbon Steel.

There is also a good range of Tools - Dies - Carbon Steel on the Small Parts and Bearings website.

Tools - Installation - For Self Tapping Inserts

Also see combined categories:
All Tools

Installation tools for self tapping thread inserts - see the linked inserts categories

This category may be available in the new MBA online store at Tools - Installation - For Self Tapping Inserts.

Related Information:

Inserts for Aluminium

Inserts for plastics

Inserts for wood

There is also a good range of Tools - Installation - For Self Tapping Inserts on the Small Parts and Bearings website.

Tools - Mandrels and Nosepieces - For Klik Rivet Nuts

Also see combined categories:
All Tools

Required for Thread Setter Tool

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

Related Information:

Thread Setter Tool

Inserts

There is also a good range of Tools - Mandrels and Nosepieces - For Klik Rivet Nuts on the Small Parts and Bearings website.

Tools - Taps - Carbon Steel - Hand

Also see combined categories:
All Taps
All Tools

Carbon Steel Straight Flute Taps. Starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

Carbon steel hand taps. Carbon Steel (CS) Hand taps. This category may be available in the new MBA online store at Tools - Taps - Carbon Steel - Hand.

There is also a good range of Tools - Taps - Carbon Steel - Hand on the Small Parts and Bearings website.

Tools - Taps - High Speed Steel - Hand

Also see combined categories:
All Taps
All Tools

High Speed Steel Short Machine Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

High Speed Steel (HSS) Short Machine taps. This category may be available in the new MBA online store at Tools - Taps - High Speed Steel - Hand.

There is also a good range of Tools - Taps - High Speed Steel - Hand on the Small Parts and Bearings website.

Tools - Taps - High Speed Steel - Hand - Sets

Also see combined categories:
All Taps
All Tools

Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set

High Speed Steel (HSS) Short Machine taps. Older stock is Triangle Brand (UK). Newer stock is Volkel Brand (German). This category may be available in the new MBA online store at Tools - Taps - High Speed Steel - Hand - Sets.

There is also a good range of Tools - Taps - High Speed Steel - Hand - Sets on the Small Parts and Bearings website.

Tools - Taps - High Speed Steel - Spiral Point

Also see combined categories:
All Taps
All Tools

Metric intermediate ground thread high speed steel taps. Also called gun taps.

This category may be available in the new MBA online store at Tools - Taps - High Speed Steel - Spiral Point.

There is also a good range of Tools - Taps - High Speed Steel - Spiral Point on the Small Parts and Bearings website.

Tools - Tap Wrenches

Also see combined categories:
All Tools

Tee handle and bar types. Suit taps from 1mm to 12mm.

This category may be available in the new MBA online store at Tools - Tap Wrenches.

There is also a good range of Tools - Tap Wrenches on the Small Parts and Bearings website.

Tools - Thread Repair

Also see combined categories:
All Tools

Quickly repairs damaged screws

There is also a good range of Tools - Thread Repair on the Small Parts and Bearings website.

Tools - Pin Wrench

Also see combined categories:
All Tools

Used on nuts with two holes in the face.

Constructed of special blued steel. This category may be available in the new MBA online store at Tools - Pin Wrench.

There is also a good range of Tools - Pin Wrench on the Small Parts and Bearings website.

Balls - Tooling - One Piece - Construction - Stainless Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 440C Stainless Steel heat treated to 55-58 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. This category may be available in the new MBA online store at Balls - Tooling - One Piece - Construction - Stainless Steel.

Related Information:

Balls Master Catalogue PDF

There is also a good range of Balls - Tooling - One Piece - Construction - Stainless Steel on the Small Parts and Bearings website.

Balls - Tooling - One Piece - Construction - Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. This category may be available in the new MBA online store at Balls - Tooling - One Piece - Construction - Steel.

Related Information:

Balls Master Catalogue PDF

There is also a good range of Balls - Tooling - One Piece - Construction - Steel on the Small Parts and Bearings website.

Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.

Related Information:

Balls Master Catalogue PDF

There is also a good range of Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit on the Small Parts and Bearings website.

Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.

Related Information:

Balls Master Catalogue PDF

There is also a good range of Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit on the Small Parts and Bearings website.

Balls - Tooling - One Piece - Shoulder - Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC. This category may be available in the new MBA online store at Balls - Tooling - One Piece - Shoulder - Steel - Press Fit.

Related Information:

Balls Master Catalogue PDF

There is also a good range of Balls - Tooling - One Piece - Shoulder - Steel - Press Fit on the Small Parts and Bearings website.

Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Related Information:

Balls Master Catalogue PDF

There is also a good range of Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit on the Small Parts and Bearings website.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 209441 products in 2115 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Tools Cutting Categories

You may also be interested in

Fastening Bushings

Main Pages

Products