Miniature Bearings Australia Pty Ltd

Searched For: Tools Circlip Categories


Tools Circlip


Tools - Circlip Pliers - External
Tools - Circlip Pliers - External

Also see combined categories:
All Tools

External circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - External.

There is also a good range of Tools - Circlip Pliers - External on the Small Parts and Bearings website.


Tools - Circlip Pliers - Internal
Tools - Circlip Pliers - Internal

Also see combined categories:
All Tools

Internal circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - Internal.

There is also a good range of Tools - Circlip Pliers - Internal on the Small Parts and Bearings website.


Tools - Circlip Pliers - Reversible
Tools - Circlip Pliers - Reversible

Also see combined categories:
All Tools

Reversible circlip pliers for internal and external circlips.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - Reversible.

There is also a good range of Tools - Circlip Pliers - Reversible on the Small Parts and Bearings website.


Tools - E-Clip Applicators
Tools - E-Clip Applicators

Also see combined categories:
All Tools

Assists with assembly e-clip application. Each tool is designed to suit one or two sizes only. This category may be available in the new MBA online store at Tools - E-Clip Applicators.

There is also a good range of Tools - E-Clip Applicators on the Small Parts and Bearings website.


Circlips - External - Bevelled
Circlips - External - Bevelled

Also see combined categories:
All External Circlips

N1402 / VSH / 5102 / 16630. Retaining rings. Snap Rings (USA).

A 15 Deg. bevel on the inside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments. This category may be available in the new MBA online store at Circlips - External - Bevelled.

Related Information:

There is also a good range of Circlips - External - Bevelled on the Small Parts and Bearings website.


Circlips - External - Grooveless
Circlips - External - Grooveless

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring. This category may be available in the new MBA online store at Circlips - External - Grooveless.

Related Information:

There is also a good range of Circlips - External - Grooveless on the Small Parts and Bearings website.


Circlips - External - Inverted
Circlips - External - Inverted

Also see combined categories:
All External Circlips

N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel. Retaining rings. Snap Rings (USA).

Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance. Less thrust load than standard circlips. This category may be available in the new MBA online store at Circlips - External - Inverted.

Related Information:

There is also a good range of Circlips - External - Inverted on the Small Parts and Bearings website.


Circlips - External - Standard - Berryllium Copper
Circlips - External - Standard - Berryllium Copper

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).

This category may be available in the new MBA online store at Circlips - External - Standard - Berryllium Copper.

Related Information:

There is also a good range of Circlips - External - Standard - Berryllium Copper on the Small Parts and Bearings website.


Circlips - External - Standard - Carbon Steel
Circlips - External - Standard - Carbon Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Plain carbon steel. This category may be available in the new MBA online store at Circlips - External - Standard - Carbon Steel.

Related Information:

There is also a good range of Circlips - External - Standard - Carbon Steel on the Small Parts and Bearings website.


Circlips - External - Standard - Stainless Steel
Circlips - External - Standard - Stainless Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / D1400 / N1400 / D1460. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).

PH15-7 Mo Stainless Steel. This category may be available in the new MBA online store at Circlips - External - Standard - Stainless Steel.

Related Information:

There is also a good range of Circlips - External - Standard - Stainless Steel on the Small Parts and Bearings website.


Circlips - External - Standard - Zinc Plated
Circlips - External - Standard - Zinc Plated

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. This category may be available in the new MBA online store at Circlips - External - Standard - Zinc Plated.

Related Information:

There is also a good range of Circlips - External - Standard - Zinc Plated on the Small Parts and Bearings website.


Circlips - External - Tabbed
Circlips - External - Tabbed

Also see combined categories:
All External Circlips

DIN 983 / D2100 / AK. Retaining rings. Snap Rings (USA).

External tabs are concentrically positioned for positioning in a concealed assembly. Tabs act as spacers for securing machine components. Conforming to DIN 983. This category may be available in the new MBA online store at Circlips - External - Tabbed.

Related Information:

There is also a good range of Circlips - External - Tabbed on the Small Parts and Bearings website.


Circlips - Internal - Bevelled
Circlips - Internal - Bevelled

Also see combined categories:
All Internal Circlips

N1302 / VHO / 16631 / 9002 / N5002. Retaining rings. Snap Rings (USA).

A 15 Deg. bevel on the outside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments. This category may be available in the new MBA online store at Circlips - Internal - Bevelled.

Related Information:

There is also a good range of Circlips - Internal - Bevelled on the Small Parts and Bearings website.


Circlips - Internal - Inverted
Circlips - Internal - Inverted

Also see combined categories:
All Internal Circlips

M1308 / JV / INTV / BN830. Retaining rings. Snap Rings (USA).

Inverted lugs seat into the groove for better clearance and cleaner appearance. Good for shielded bearings that pass tightly through the bore or housing. Use recommended installation pliers. This category may be available in the new MBA online store at Circlips - Internal - Inverted.

Related Information:

There is also a good range of Circlips - Internal - Inverted on the Small Parts and Bearings website.


Circlips - Internal - Standard - Carbon Steel
Circlips - Internal - Standard - Carbon Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Plain carbon steel. Tolerances on request. This category may be available in the new MBA online store at Circlips - Internal - Standard - Carbon Steel.

Related Information:

There is also a good range of Circlips - Internal - Standard - Carbon Steel on the Small Parts and Bearings website.


Circlips - Internal - Standard - Stainless Steel
Circlips - Internal - Standard - Stainless Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).

PH15-7 Mo Stainless Steel. Tolerances on request. This category may be available in the new MBA online store at Circlips - Internal - Standard - Stainless Steel.

Related Information:

There is also a good range of Circlips - Internal - Standard - Stainless Steel on the Small Parts and Bearings website.


Circlips - Internal - Standard - Zinc Plated
Circlips - Internal - Standard - Zinc Plated

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Zinc plated carbon steel. Tolerances on request. This category may be available in the new MBA online store at Circlips - Internal - Standard - Zinc Plated.

Related Information:

There is also a good range of Circlips - Internal - Standard - Zinc Plated on the Small Parts and Bearings website.


Circlips - Internal - Tabbed
Circlips - Internal - Tabbed

Also see combined categories:
All Internal Circlips

DIN984 / D2000 / Seeger JK. Retaining rings. Snap Rings (USA).

Internal tabs are concentrically positioned for a concealed assembly. Tabs act as spacers for securing machine components. This category may be available in the new MBA online store at Circlips - Internal - Tabbed.

Related Information:

There is also a good range of Circlips - Internal - Tabbed on the Small Parts and Bearings website.


E-Clips - Bowed
E-Clips - Bowed

Also see combined categories:
All E-Clips

For end play take up.

Thickness tolerance +/- 0.025. This category may be available in the new MBA online store at E-Clips - Bowed.

There is also a good range of E-Clips - Bowed on the Small Parts and Bearings website.


E-Clips - Klipring
E-Clips - Klipring

Also see combined categories:
All E-Clips

Also known as Poodle Rings - Imperial - N1504 / NKP

This category may be available in the new MBA online store at E-Clips - Klipring.

There is also a good range of E-Clips - Klipring on the Small Parts and Bearings website.


E-Clips - Basic - Berrylium Copper
E-Clips - Basic - Berrylium Copper

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Berrylium Copper.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. This category may be available in the new MBA online store at E-Clips - Basic - Berrylium Copper.

Related Information:

There is also a good range of E-Clips - Basic - Berrylium Copper on the Small Parts and Bearings website.


E-Clips - Basic - Carbon Steel
E-Clips - Basic - Carbon Steel

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Carbon spring steel including zinc plated and plain.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. Includes plain and zinc plated. This category may be available in the new MBA online store at E-Clips - Basic - Carbon Steel.

Related Information:

There is also a good range of E-Clips - Basic - Carbon Steel on the Small Parts and Bearings website.


E-Clips - Basic - Stainless Steel
E-Clips - Basic - Stainless Steel

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Stainless Steel PH15-7 Mo.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. This category may be available in the new MBA online store at E-Clips - Basic - Stainless Steel.

Related Information:

There is also a good range of E-Clips - Basic - Stainless Steel on the Small Parts and Bearings website.


Wire Rings - External - Round Section
Wire Rings - External - Round Section

Also see combined categories:
All External Circlips

DIN7993A / RW / BN825. Retaining rings. Snap Rings (USA). Round section circlips.

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins. This category may be available in the new MBA online store at Wire Rings - External - Round Section.

Related Information:

There is also a good range of Wire Rings - External - Round Section on the Small Parts and Bearings website.


Wire Rings - Internal - Round Section
Wire Rings - Internal - Round Section

Also see combined categories:
All Internal Circlips

Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA). Round section circlips.

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins. This category may be available in the new MBA online store at Wire Rings - Internal - Round Section.

Related Information:

There is also a good range of Wire Rings - Internal - Round Section on the Small Parts and Bearings website.


Snap Rings - Internal - Basic - Carbon Steel
Snap Rings - Internal - Basic - Carbon Steel

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar. This category may be available in the new MBA online store at Snap Rings - Internal - Basic - Carbon Steel.

There is also a good range of Snap Rings - Internal - Basic - Carbon Steel on the Small Parts and Bearings website.


Pins - Clevis - Zinc Plated - Groove Locking
Pins - Clevis - Zinc Plated - Groove Locking

Also see combined categories:
All Clevis Pins

Match with a suitable E-Clip or Circlip to suit groove size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Sinc plated low carbon steel. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at Pins - Clevis - Zinc Plated - Groove Locking.

Related Information:

There is also a good range of Pins - Clevis - Zinc Plated - Groove Locking on the Small Parts and Bearings website.


Pins - Clevis - Stainless Steel 300 Grade - Groove Locking
Pins - Clevis - Stainless Steel 300 Grade  - Groove Locking

Also see combined categories:
All Clevis Pins

Match with a suitable E-Clip or Circlip to suit groove size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at Pins - Clevis - Stainless Steel 300 Grade - Groove Locking.

Related Information:

There is also a good range of Pins - Clevis - Stainless Steel 300 Grade - Groove Locking on the Small Parts and Bearings website.


Tools - Installation - Indexing Plunger
Tools - Installation - Indexing Plunger

Also see combined categories:
All Tools

Two slots provided in the upper end of the body and are accessible when the knob is in the retracted position. For use with WIP type plungers.

This category may be available in the new MBA online store at Tools - Installation - Indexing Plunger.

There is also a good range of Tools - Installation - Indexing Plunger on the Small Parts and Bearings website.


Tools - Thread Insert - Power Drive - EZ-Lok
Tools - Thread Insert - Power Drive - EZ-Lok

Also see combined categories:
All Tools

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.

This category may be available in the new MBA online store at Tools - Thread Insert - Power Drive - EZ-Lok.

There is also a good range of Tools - Thread Insert - Power Drive - EZ-Lok on the Small Parts and Bearings website.


Tools - Keys - Hex
Tools - Keys - Hex

Also see combined categories:
All Tools

Long and short series allen keys.

Alloy Steel Heat Treated. Short Arm DIN 911. Long Arm ANSI B18.3 1986. This category may be available in the new MBA online store at Tools - Keys - Hex.

There is also a good range of Tools - Keys - Hex on the Small Parts and Bearings website.


Tools - Sets
Tools - Sets

Also see combined categories:
All Tools

General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.

This category may be available in the new MBA online store at Tools - Sets.

There is also a good range of Tools - Sets on the Small Parts and Bearings website.


Tools - Sets - Foldup
Tools - Sets - Foldup

Also see combined categories:
All Tools

Handy sets of popular sized hex and torx wrenches.

Highest quality 8650 chrome nickel alloy heat treated and finished to resist rust. Ergo style has colour coded handles. Classic style has one piece steel grip handle. Conveniently folds up like a jack knife when not in use. This category may be available in the new MBA online store at Tools - Sets - Foldup.

There is also a good range of Tools - Sets - Foldup on the Small Parts and Bearings website.


Tools - Tubing Work
Tools - Tubing Work

Also see combined categories:
All Tools

Tube benders and cutters

This category may be available in the new MBA online store at Tools - Tubing Work.

Related Information:

There is also a good range of Tools - Tubing Work on the Small Parts and Bearings website.


Tools - Drill Bits
Tools - Drill Bits

Also see combined categories:
All Tools

Extensive range of drill bits, from larger standard sizes down to as small as 0.32mm micro miniature sizes. Sutton - PN - Bordo.

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Drill Bits.

There is also a good range of Tools - Drill Bits on the Small Parts and Bearings website.


Tools - Drill Bits - Reduced Shank
Tools - Drill Bits - Reduced Shank


Reduced Shanked Drill Bits

This category may be available in the new MBA online store at Tools - Drill Bits - Reduced Shank.

There is also a good range of Tools - Drill Bits - Reduced Shank on the Small Parts and Bearings website.


Tools - Rotary Files - Aluminium Cut
Tools - Rotary Files - Aluminium Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Aluminium Cut.

There is also a good range of Tools - Rotary Files - Aluminium Cut on the Small Parts and Bearings website.


Tools - Rotary Files - Double Cut
Tools - Rotary Files - Double Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Double Cut.

There is also a good range of Tools - Rotary Files - Double Cut on the Small Parts and Bearings website.


Tools - Rotary Files - Standard Cut
Tools - Rotary Files - Standard Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Standard Cut.

There is also a good range of Tools - Rotary Files - Standard Cut on the Small Parts and Bearings website.


Tools - General
Tools - General

Also see combined categories:
All Tools

Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits

X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more. This category may be available in the new MBA online store at Tools - General.

There is also a good range of Tools - General on the Small Parts and Bearings website.


Tools - Nut Drivers
Tools - Nut Drivers

Also see combined categories:
All Tools

Includes socket wrench for 0-80 size screws

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Nut Drivers.

There is also a good range of Tools - Nut Drivers on the Small Parts and Bearings website.


Tools - Pin Vises
Tools - Pin Vises

Also see combined categories:
All Tools

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Pin Vises.

There is also a good range of Tools - Pin Vises on the Small Parts and Bearings website.


Tools - Punches
Tools - Punches

Also see combined categories:
All Tools

Number punch and letter punch sets

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Punches.

There is also a good range of Tools - Punches on the Small Parts and Bearings website.


Tools - Wrenches
Tools - Wrenches

Also see combined categories:
All Tools

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Wrenches.

There is also a good range of Tools - Wrenches on the Small Parts and Bearings website.


Tools - Pullers - Dowel Remover and Setter
Tools - Pullers - Dowel Remover and Setter

Also see combined categories:
All Tools

Designed for removing and setting any pull dowel up to 25.40mm.

Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set. This category may be available in the new MBA online store at Tools - Pullers - Dowel Remover and Setter.

Related Information:

There is also a good range of Tools - Pullers - Dowel Remover and Setter on the Small Parts and Bearings website.


Tools - Screw Extractors
Tools - Screw Extractors

Also see combined categories:
All Tools

The quick and easy way to remove broken screws, bolts, pipes and studs.

Note! You will also need a drill bit of the correct size for each extractor. This category may be available in the new MBA online store at Tools - Screw Extractors.

There is also a good range of Tools - Screw Extractors on the Small Parts and Bearings website.


Tools - Die Holders
Tools - Die Holders

Also see combined categories:
All Tools

Bar and round holders. 16mm, 20.64mm and 25.4mm (inch). Also called a button die stock.

This category may be available in the new MBA online store at Tools - Die Holders.

There is also a good range of Tools - Die Holders on the Small Parts and Bearings website.


Tools - Die Nuts
Tools - Die Nuts

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

This category may be available in the new MBA online store at Tools - Die Nuts.

There is also a good range of Tools - Die Nuts on the Small Parts and Bearings website.


Tools - Dies - Carbon Steel
Tools - Dies - Carbon Steel

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

This category may be available in the new MBA online store at Tools - Dies - Carbon Steel.

There is also a good range of Tools - Dies - Carbon Steel on the Small Parts and Bearings website.


Tools - Installation - For Self Tapping Inserts
Tools - Installation - For Self Tapping Inserts

Also see combined categories:
All Tools

Installation tools for self tapping thread inserts - see the linked inserts categories

This category may be available in the new MBA online store at Tools - Installation - For Self Tapping Inserts.

Related Information:

There is also a good range of Tools - Installation - For Self Tapping Inserts on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 219142 products in 2170 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 219142 products in 2170 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.