Tools Circlip Categories
Tools - Circlip Pliers - External
Also see combined categories:
All Tools
All Tools
External circlip pliers including standard and ratchet type.
Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - External.
There is also a good range of Tools - Circlip Pliers - External on the Small Parts and Bearings website.
Tools - Circlip Pliers - Internal
Also see combined categories:
All Tools
All Tools
Internal circlip pliers including standard and ratchet type.
Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - Internal.
There is also a good range of Tools - Circlip Pliers - Internal on the Small Parts and Bearings website.
Tools - Circlip Pliers - Reversible
Also see combined categories:
All Tools
All Tools
Reversible circlip pliers for internal and external circlips.
Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - Reversible.
There is also a good range of Tools - Circlip Pliers - Reversible on the Small Parts and Bearings website.
Tools - E-Clip Applicators
Also see combined categories:
All Tools
All Tools
Assists with assembly e-clip application. Each tool is designed to suit one or two sizes only. This category may be available in the new MBA online store at Tools - E-Clip Applicators.
There is also a good range of Tools - E-Clip Applicators on the Small Parts and Bearings website.
Circlips - External - Bevelled
N1402 / VSH / 5102 / 16630. Retaining rings. Snap Rings (USA).
A 15 Deg. bevel on the inside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments. This category may be available in the new MBA online store at Circlips - External - Bevelled.
Related Information:
There is also a good range of Circlips - External - Bevelled on the Small Parts and Bearings website.
Circlips - External - Inverted
N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel. Retaining rings. Snap Rings (USA).
Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance. Less thrust load than standard circlips. This category may be available in the new MBA online store at Circlips - External - Inverted.
Related Information:
There is also a good range of Circlips - External - Inverted on the Small Parts and Bearings website.
Circlips - External - Standard - Berryllium Copper
Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).
This category may be available in the new MBA online store at Circlips - External - Standard - Berryllium Copper.
Related Information:
There is also a good range of Circlips - External - Standard - Berryllium Copper on the Small Parts and Bearings website.
Circlips - External - Standard - Carbon Steel
Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).
Plain carbon steel. This category may be available in the new MBA online store at Circlips - External - Standard - Carbon Steel.
Related Information:
There is also a good range of Circlips - External - Standard - Carbon Steel on the Small Parts and Bearings website.
Circlips - External - Standard - Stainless Steel
Imperial and metric DIN471 / D1400 / N1400 / D1460. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).
PH15-7 Mo Stainless Steel. This category may be available in the new MBA online store at Circlips - External - Standard - Stainless Steel.
Related Information:
There is also a good range of Circlips - External - Standard - Stainless Steel on the Small Parts and Bearings website.
Circlips - External - Standard - Zinc Plated
Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).
Zinc plated carbon steel. This category may be available in the new MBA online store at Circlips - External - Standard - Zinc Plated.
Related Information:
There is also a good range of Circlips - External - Standard - Zinc Plated on the Small Parts and Bearings website.
Circlips - External - Tabbed
DIN 983 / D2100 / AK. Retaining rings. Snap Rings (USA).
External tabs are concentrically positioned for positioning in a concealed assembly. Tabs act as spacers for securing machine components. Conforming to DIN 983. This category may be available in the new MBA online store at Circlips - External - Tabbed.
Related Information:
There is also a good range of Circlips - External - Tabbed on the Small Parts and Bearings website.
Circlips - Grooveless
Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).
Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring. This category may be available in the new MBA online store at Circlips - Grooveless.
Related Information:
There is also a good range of Circlips - Grooveless on the Small Parts and Bearings website.
Circlips - Internal - Bevelled
N1302 / VHO / 16631 / 9002 / N5002. Retaining rings. Snap Rings (USA).
A 15 Deg. bevel on the outside diameter to be fitted to a 15% bevel on the load bearing groove wall. Will yield rigid end-play take-up of manufacturing tolerances or wear on the retained part. Used in greasy or oily environments. This category may be available in the new MBA online store at Circlips - Internal - Bevelled.
Related Information:
There is also a good range of Circlips - Internal - Bevelled on the Small Parts and Bearings website.
Circlips - Internal - Inverted
M1308 / JV / INTV / BN830. Retaining rings. Snap Rings (USA).
Inverted lugs seat into the groove for better clearance and cleaner appearance. Good for shielded bearings that pass tightly through the bore or housing. Use recommended installation pliers. This category may be available in the new MBA online store at Circlips - Internal - Inverted.
Related Information:
There is also a good range of Circlips - Internal - Inverted on the Small Parts and Bearings website.
Circlips - Internal - Standard - Carbon Steel
Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).
Plain carbon steel. Tolerances on request. This category may be available in the new MBA online store at Circlips - Internal - Standard - Carbon Steel.
Related Information:
There is also a good range of Circlips - Internal - Standard - Carbon Steel on the Small Parts and Bearings website.
Circlips - Internal - Standard - Stainless Steel
Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. PH15-7 Mo Stainless Steel. Retaining rings. Snap Rings (USA).
PH15-7 Mo Stainless Steel. Tolerances on request. This category may be available in the new MBA online store at Circlips - Internal - Standard - Stainless Steel.
Related Information:
There is also a good range of Circlips - Internal - Standard - Stainless Steel on the Small Parts and Bearings website.
Circlips - Internal - Standard - Zinc Plated
Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).
Zinc plated carbon steel. Tolerances on request. This category may be available in the new MBA online store at Circlips - Internal - Standard - Zinc Plated.
Related Information:
There is also a good range of Circlips - Internal - Standard - Zinc Plated on the Small Parts and Bearings website.
Circlips - Internal - Tabbed
DIN984 / D2000 / Seeger JK. Retaining rings. Snap Rings (USA).
Internal tabs are concentrically positioned for a concealed assembly. Tabs act as spacers for securing machine components. This category may be available in the new MBA online store at Circlips - Internal - Tabbed.
Related Information:
There is also a good range of Circlips - Internal - Tabbed on the Small Parts and Bearings website.
E-Clips - Bowed
For end play take up.
Thickness tolerance +/- 0.025. This category may be available in the new MBA online store at E-Clips - Bowed.
There is also a good range of E-Clips - Bowed on the Small Parts and Bearings website.
E-Clips - Klipring
Also known as Poodle Rings - Imperial - N1504 / NKP
This category may be available in the new MBA online store at E-Clips - Klipring.
There is also a good range of E-Clips - Klipring on the Small Parts and Bearings website.
E-Clips - Basic - Berrylium Copper
Basic imperial and metric e-clips DIN6799 and N1500. Berrylium Copper.
Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. This category may be available in the new MBA online store at E-Clips - Basic - Berrylium Copper.
Related Information:
There is also a good range of E-Clips - Basic - Berrylium Copper on the Small Parts and Bearings website.
E-Clips - Basic - Carbon Steel
Basic imperial and metric e-clips DIN6799 and N1500. Carbon spring steel including zinc plated and plain.
Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. Includes plain and zinc plated. This category may be available in the new MBA online store at E-Clips - Basic - Carbon Steel.
Related Information:
There is also a good range of E-Clips - Basic - Carbon Steel on the Small Parts and Bearings website.
E-Clips - Basic - Stainless Steel
Basic imperial and metric e-clips DIN6799 and N1500. Stainless Steel PH15-7 Mo.
Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. This category may be available in the new MBA online store at E-Clips - Basic - Stainless Steel.
Related Information:
There is also a good range of E-Clips - Basic - Stainless Steel on the Small Parts and Bearings website.
Wire Rings - External - Round Section
DIN7993A / RW / BN825. Retaining rings. Snap Rings (USA). Round section circlips.
Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins. This category may be available in the new MBA online store at Wire Rings - External - Round Section.
Related Information:
There is also a good range of Wire Rings - External - Round Section on the Small Parts and Bearings website.
Wire Rings - Internal - Round Section
Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA). Round section circlips.
Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins. This category may be available in the new MBA online store at Wire Rings - Internal - Round Section.
Related Information:
There is also a good range of Wire Rings - Internal - Round Section on the Small Parts and Bearings website.
Snap Rings - Internal - Basic - Carbon Steel
M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.
Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar. This category may be available in the new MBA online store at Snap Rings - Internal - Basic - Carbon Steel.
There is also a good range of Snap Rings - Internal - Basic - Carbon Steel on the Small Parts and Bearings website.
Pins - Clevis - Groove Locking - Zinc Plated
Match with a suitable E-Clip or Circlip to suit groove size shown in listings
In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Sinc plated low carbon steel. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at Pins - Clevis - Groove Locking - Zinc Plated.
Related Information:
There is also a good range of Pins - Clevis - Groove Locking - Zinc Plated on the Small Parts and Bearings website.
Pins - Clevis - Groove Locking - Stainless Steel 300 Grade
Match with a suitable E-Clip or Circlip to suit groove size shown in listings
In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at Pins - Clevis - Groove Locking - Stainless Steel 300 Grade.
Related Information:
There is also a good range of Pins - Clevis - Groove Locking - Stainless Steel 300 Grade on the Small Parts and Bearings website.
Tools - Installation - Indexing Plunger
Two slots provided in the upper end of the body and are accessible when the knob is in the retracted position. For use with WIP type plungers.
This category may be available in the new MBA online store at Tools - Installation - Indexing Plunger.
There is also a good range of Tools - Installation - Indexing Plunger on the Small Parts and Bearings website.
Tools - Thread Insert - Power Drive - EZ-Lok
Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.
This category may be available in the new MBA online store at Tools - Thread Insert - Power Drive - EZ-Lok.
There is also a good range of Tools - Thread Insert - Power Drive - EZ-Lok on the Small Parts and Bearings website.
Tools - Keys - Hex - Standard
Long and short series allen keys.
Alloy Steel Heat Treated. Short Arm DIN 911. Long Arm ANSI B18.3 1986. This category may be available in the new MBA online store at Tools - Keys - Hex - Standard.
There is also a good range of Tools - Keys - Hex - Standard on the Small Parts and Bearings website.
Tools - Sets - Foldup
Handy sets of popular sized hex and torx wrenches.
Highest quality 8650 chrome nickel alloy heat treated and finished to resist rust. Ergo style has colour coded handles. Classic style has one piece steel grip handle. Conveniently folds up like a jack knife when not in use. This category may be available in the new MBA online store at Tools - Sets - Foldup.
There is also a good range of Tools - Sets - Foldup on the Small Parts and Bearings website.
Tools - Tubing Work
Tube benders and cutters
This category may be available in the new MBA online store at Tools - Tubing Work.
Related Information:
There is also a good range of Tools - Tubing Work on the Small Parts and Bearings website.
Tools - Drill Bits - Reduced Shank
Reduced Shanked Drill Bits
This category may be available in the new MBA online store at Tools - Drill Bits - Reduced Shank.
There is also a good range of Tools - Drill Bits - Reduced Shank on the Small Parts and Bearings website.
Tools - Drill Bits - Standard - Standard
Extensive range of drill bits, from larger standard sizes down to as small as 0.32mm micro miniature sizes. Sutton - PN - Bordo.
Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Drill Bits - Standard - Standard.
There is also a good range of Tools - Drill Bits - Standard - Standard on the Small Parts and Bearings website.
Tools - Rotary Files - Aluminium Cut
Used for deburring and smoothing metals.
Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Aluminium Cut.
There is also a good range of Tools - Rotary Files - Aluminium Cut on the Small Parts and Bearings website.
Tools - Rotary Files - Double Cut
Used for deburring and smoothing metals.
Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Double Cut.
There is also a good range of Tools - Rotary Files - Double Cut on the Small Parts and Bearings website.
Tools - Rotary Files - Standard Cut
Used for deburring and smoothing metals.
Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Standard Cut.
There is also a good range of Tools - Rotary Files - Standard Cut on the Small Parts and Bearings website.
Tools - General
Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits
X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more. This category may be available in the new MBA online store at Tools - General.
There is also a good range of Tools - General on the Small Parts and Bearings website.
Tools - Nut Drivers
Includes socket wrench for 0-80 size screws
Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Nut Drivers.
There is also a good range of Tools - Nut Drivers on the Small Parts and Bearings website.
Tools - Pin Vises
Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Pin Vises.
There is also a good range of Tools - Pin Vises on the Small Parts and Bearings website.
Tools - Punches - Standard
Number punch and letter punch sets
Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Punches - Standard.
There is also a good range of Tools - Punches - Standard on the Small Parts and Bearings website.
Tools - Wrenches
Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Wrenches.
There is also a good range of Tools - Wrenches on the Small Parts and Bearings website.
Tools - Pullers - Dowel Remover and Setter
Designed for removing and setting any pull dowel up to 25.40mm.
Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set. This category may be available in the new MBA online store at Tools - Pullers - Dowel Remover and Setter.
Related Information:
There is also a good range of Tools - Pullers - Dowel Remover and Setter on the Small Parts and Bearings website.
Tools - Screw Extractors
The quick and easy way to remove broken screws, bolts, pipes and studs.
Note! You will also need a drill bit of the correct size for each extractor. This category may be available in the new MBA online store at Tools - Screw Extractors.
There is also a good range of Tools - Screw Extractors on the Small Parts and Bearings website.
Tools - Die Holders
Bar and round holders. 16mm, 20.64mm and 25.4mm (inch). Also called a button die stock.
This category may be available in the new MBA online store at Tools - Die Holders.
There is also a good range of Tools - Die Holders on the Small Parts and Bearings website.
Tools - Die Nuts
Tungsten Chrome Alloy - Carbon Steel die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
This category may be available in the new MBA online store at Tools - Die Nuts.
There is also a good range of Tools - Die Nuts on the Small Parts and Bearings website.
Tools - Dies - Carbon Steel
Tungsten Chrome Alloy - Carbon Steel Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
This category may be available in the new MBA online store at Tools - Dies - Carbon Steel.
There is also a good range of Tools - Dies - Carbon Steel on the Small Parts and Bearings website.
Tools - Installation - For Self Tapping Inserts
Installation tools for self tapping thread inserts - see the linked inserts categories
This category may be available in the new MBA online store at Tools - Installation - For Self Tapping Inserts.
Related Information:
There is also a good range of Tools - Installation - For Self Tapping Inserts on the Small Parts and Bearings website.
Tools - Mandrels and Nosepieces - For Klik Rivet Nuts
Required for Thread Setter Tool
Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.
Related Information:
There is also a good range of Tools - Mandrels and Nosepieces - For Klik Rivet Nuts on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
