Miniature Bearings Australia Pty Ltd

Timing Belt Lengths Categories


Belts - Timing - Lengths
Belts - Timing - Lengths


Sold per meter - Refer diagrams in timing belt listings for aspects of various pitches.

Lengths of timing belt stock are used for reciprocating applications. Not meant to be joined and used as a round belt. Orders for multiple metres will be supplied as a complete length up to the maximum length shown in the table. GT3 replaces GT2 as GT2 stock is depleted. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:

There is also a good range of Belts - Timing - Lengths on the Small Parts and Bearings website.


You may also be interested in

Clamps


Clamps - Timing Belt
Clamps - Timing Belt


Used for locking the ends of timing belt lengths used in reciprocating applications

Suits single and double sided belts. Black Polycarbonate with 303 stainless fasteners. Low inertia. Compact Design. Patent Pending. For MXL, XL, GT 2mm, GT 3mm, GT 5mm, HTD 3mm and HTD 5mm belt pitches.

Related Information:

There is also a good range of Clamps - Timing Belt on the Small Parts and Bearings website.


Clamp Kits - Timing Belt
Clamp Kits - Timing Belt


Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included. This category may be available in the new MBA online store at Clamp Kits - Timing Belt.

Related Information:

There is also a good range of Clamp Kits - Timing Belt on the Small Parts and Bearings website.


Belts Timing T10 10mm


Belts - Timing - 10.000mm Pitch - T10 - 10mm Wide
Belts - Timing - 10.000mm Pitch - T10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - T10 - 10mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - T10 - 12mm Wide
Belts - Timing - 10.000mm Pitch - T10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - T10 - 12mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - T10 - 16mm Wide
Belts - Timing - 10.000mm Pitch - T10 - 16mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - T10 - 16mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - T10 - 20mm Wide
Belts - Timing - 10.000mm Pitch - T10 - 20mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - T10 - 20mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - T10 - 25mm Wide
Belts - Timing - 10.000mm Pitch - T10 - 25mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - T10 - 25mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - T10 - 32mm Wide
Belts - Timing - 10.000mm Pitch - T10 - 32mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - T10 - 32mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - T10 - 50mm Wide
Belts - Timing - 10.000mm Pitch - T10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - T10 - 50mm Wide on the Small Parts and Bearings website.


Belts Timing T2.5 2.5mm


Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 - 10mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.500mm Pitch - T2.5 - 12mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 - 12mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 12mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 -  4mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 -  6mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.500mm Pitch - T2.5 - 8mm Wide
Belts - Timing -  2.500mm Pitch - T2.5 -  8mm Wide

Also see combined categories:
All 2.5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.500mm.

Related Information:

There is also a good range of Belts - Timing - 2.500mm Pitch - T2.5 - 8mm Wide on the Small Parts and Bearings website.


Belts Timing T5 5mm


Belts - Timing - 5.000mm Pitch - T5 - 10mm Wide
Belts - Timing -  5.000mm Pitch - T5 - 10mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - T5 - 10mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - T5 - 12mm Wide
Belts - Timing -  5.000mm Pitch - T5 - 12mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - T5 - 12mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - T5 - 15mm Wide
Belts - Timing -  5.000mm Pitch - T5 - 15mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - T5 - 15mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - T5 - 16mm Wide
Belts - Timing -  5.000mm Pitch - T5 - 16mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - T5 - 16mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - T5 - 20mm Wide
Belts - Timing -  5.000mm Pitch - T5 - 20mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - T5 - 20mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - T5 - 25mm Wide
Belts - Timing -  5.000mm Pitch - T5 - 25mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - T5 - 25mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - T5 - 6mm Wide
Belts - Timing -  5.000mm Pitch - T5 -  6mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - T5 - 6mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.000mm Pitch - T5 - 8mm Wide
Belts - Timing -  5.000mm Pitch - T5 -  8mm Wide

Also see combined categories:
All 5mm Pitch Timing Belts

T Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.000mm.

Related Information:

There is also a good range of Belts - Timing - 5.000mm Pitch - T5 - 8mm Wide on the Small Parts and Bearings website.


Belts Timing AT10 10mm


Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide on the Small Parts and Bearings website.


Belts Timing L Pitch 9.53mm


Belts - Timing - 9.525mm Pitch - L - 12.7mm Wide
Belts - Timing -  9.525mm Pitch - L -  12.7mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 9.525mm Pitch - L - 12.7mm Wide on the Small Parts and Bearings website.


Belts - Timing - 9.525mm Pitch - L - 19.1mm Wide
Belts - Timing -  9.525mm Pitch - L -  19.1mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 9.525mm Pitch - L - 19.1mm Wide on the Small Parts and Bearings website.


Belts - Timing - 9.525mm Pitch - L - 25.4mm Wide
Belts - Timing -  9.525mm Pitch - L -  25.4mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 9.525mm Pitch - L - 25.4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 9.525mm Pitch - L - 38.1mm Wide
Belts - Timing -  9.525mm Pitch - L -  38.1mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 9.525mm Pitch - L - 38.1mm Wide on the Small Parts and Bearings website.


Belts Timing XL Pitch 5.08mm


Belts - Timing - 5.080mm Pitch - XL - 6.4mm Wide
Belts - Timing -  5.080mm Pitch - XL -  6.4mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 5.080mm Pitch - XL - 6.4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide
Belts - Timing -  5.080mm Pitch - XL -  7.9mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.080mm Pitch - XL - 9.5mm Wide
Belts - Timing -  5.080mm Pitch - XL -  9.5mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 5.080mm Pitch - XL - 9.5mm Wide on the Small Parts and Bearings website.


Belts Timing L Pitch 9.53mm


Belts - Timing - 9.525mm Pitch - L Double Sided - 12.7mm Wide
Belts - Timing -  9.525mm Pitch - L Double Sided - 12.7mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 9.525mm Pitch - L Double Sided - 12.7mm Wide on the Small Parts and Bearings website.


Belts - Timing - 9.525mm Pitch - L Double Sided - 19.1mm Wide
Belts - Timing -  9.525mm Pitch - L Double Sided - 19.1mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 9.525mm Pitch - L Double Sided - 19.1mm Wide on the Small Parts and Bearings website.


Belts - Timing - 9.525mm Pitch - L Double Sided - 25.4mm Wide
Belts - Timing -  9.525mm Pitch - L Double Sided - 25.4mm Wide

Also see combined categories:
All L 9.525mm Pitch Timing Belts

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Pitch (P) - 9.525mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 9.525mm Pitch - L Double Sided - 25.4mm Wide on the Small Parts and Bearings website.


Belts Timing 40DP LT Pitch


Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 4.8mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 6.4mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 7.9mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Pitch (P) - 2.073mm (0.0816 inch).

Related Information:

There is also a good range of Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide on the Small Parts and Bearings website.


Belts Timing XL Pitch 5.08mm


Belts - Timing - 5.080mm Pitch - XL - 12.7mm Wide
Belts - Timing -  5.080mm Pitch - XL - 12.7mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch. 12mm or 12.7mm width.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 5.080mm Pitch - XL - 12.7mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.080mm Pitch - XL Double Sided - 6.4mm Wide
Belts - Timing -  5.080mm Pitch - XL Double Sided -  6.4mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 5.080mm Pitch - XL Double Sided - 6.4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 5.080mm Pitch - XL Double Sided - 9.5mm Wide
Belts - Timing -  5.080mm Pitch - XL Double Sided -  9.5mm Wide

Also see combined categories:
All XL 5.08mm Pitch Timing Belts

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Pitch (P) - 5.080mm (0.200 inch).

Related Information:

There is also a good range of Belts - Timing - 5.080mm Pitch - XL Double Sided - 9.5mm Wide on the Small Parts and Bearings website.


Belts Timing MXL Pitch


Belts - Timing - 2.032mm Pitch - MXL - 12.7mm Wide
Belts - Timing -  2.032mm Pitch - MXL - 12.7mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 12.7mm (1/2 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 12.7mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.032mm Pitch - MXL - 3.2mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  3.2mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 3.18mm (1/8 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 3.2mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.032mm Pitch - MXL - 4.8mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  4.8mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 4.76mm (3/16 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 4.8mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.032mm Pitch - MXL - 6.4mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  6.4mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 6.4mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.032mm Pitch - MXL - 7.9mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  7.9mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 7.93mm (5/16 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 7.9mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  9.5mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 9.53mm (3/8 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide on the Small Parts and Bearings website.


Belts - Timing - 2.032mm Pitch - MXL Double Sided - 6.4mm Wide
Belts - Timing -  2.032mm Pitch - MXL Double Sided - 6.4mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Pitch (P) - 2.032mm (0.08 inch).

Related Information:

There is also a good range of Belts - Timing - 2.032mm Pitch - MXL Double Sided - 6.4mm Wide on the Small Parts and Bearings website.


Belts Timing AT10 10mm


Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 10mm Wide on the Small Parts and Bearings website.


Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide
Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide

Also see combined categories:
All 10mm Pitch Timing Belts

AT Synchroflex Generation III Series Metric Timing Belts.

Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Pitch (P) - 10.000mm.

Related Information:

There is also a good range of Belts - Timing - 10.000mm Pitch - AT10 - 12mm Wide on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212690 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.