Miniature Bearings Australia Pty Ltd

Threaded Rod


Threaded Rod - Unthreaded Centre - Steel
Threaded Rod - Unthreaded Centre - Steel

Also see combined categories:
All Threaded Rod

UNC Small range only. Threaded each end 38.1mm (1.5 inches) and unthreaded in the centre.

Related Information:
Fully threaded rod
Studs

There is also a good range of Threaded Rod - Unthreaded Centre - Steel on the Small Parts and Bearings website.

You may also like

Allthread


Threaded Rod - Allthread - Aluminium
Threaded Rod - Allthread - Aluminium

Also see combined categories:
All Threaded Rod

UNC and UNF light weight aluminium. Also known as booker rod.


There is also a good range of Threaded Rod - Allthread - Aluminium on the Small Parts and Bearings website.

Threaded Rod - Allthread - Plastic
Threaded Rod - Allthread - Plastic

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - Nylon and PVC. Also known as booker rod.

Light Weight. Non Corrosive. Vibration Resistant.


There is also a good range of Threaded Rod - Allthread - Plastic on the Small Parts and Bearings website.

Threaded Rod - Allthread - Stainless Steel - 304
Threaded Rod - Allthread - Stainless Steel - 304

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 303 and 304 grades. Also known as booker rod.


There is also a good range of Threaded Rod - Allthread - Stainless Steel - 304 on the Small Parts and Bearings website.

Threaded Rod - Allthread - Stainless Steel - 316
Threaded Rod - Allthread - Stainless Steel - 316

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 316 grade. Also known as booker rod.


There is also a good range of Threaded Rod - Allthread - Stainless Steel - 316 on the Small Parts and Bearings website.

Threaded Rod - Allthread - Steel - Plain
Threaded Rod - Allthread - Steel - Plain

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - BSW - Includes plain mild steel and high tensile. Also known as booker rod.


There is also a good range of Threaded Rod - Allthread - Steel - Plain on the Small Parts and Bearings website.

Threaded Rod - Allthread - Steel - Zinc Plated
Threaded Rod - Allthread - Steel - Zinc Plated

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - BSW. Also known as booker rod.


There is also a good range of Threaded Rod - Allthread - Steel - Zinc Plated on the Small Parts and Bearings website.

Collars


Collars - Threaded - Clamp Type - Stainless Steel
Collars - Threaded - Clamp Type - Stainless Steel

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


There is also a good range of Collars - Threaded - Clamp Type - Stainless Steel on the Small Parts and Bearings website.

Collars - Threaded - Clamp Type - Steel
Collars - Threaded - Clamp Type - Steel

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


There is also a good range of Collars - Threaded - Clamp Type - Steel on the Small Parts and Bearings website.

Framing


Automat - Frame Kit Threaded Rods
Automat - Frame Kit Threaded Rods

All M3.5 Thread. See PDF file in FTP Directory for more information. Educational tool suitable for mechanical teaching institutions.

All M3.5 Thread Mild Steel.

Related Information:
See all Automat Categories

There is also a good range of Automat - Frame Kit Threaded Rods on the Small Parts and Bearings website.

Cable


Attachments - Threaded Plugs
Attachments - Threaded Plugs

Use with synchromesh or standard miniature cable

F and L dimensions are obtained after swaging. Before swaging the fitting is round.

Related Information:
Cable

There is also a good range of Attachments - Threaded Plugs on the Small Parts and Bearings website.

Pillars


Pillars - Threaded
Pillars - Threaded

Standoffs

Also know as stand offs.


There is also a good range of Pillars - Threaded on the Small Parts and Bearings website.

Studs


Studs - Threaded - Driver
Studs - Threaded - Driver

Medium carbon steel with black oxide finish. 125,000 PSI minimum tensile strength. With wrench flats in the centre.


There is also a good range of Studs - Threaded - Driver on the Small Parts and Bearings website.

Studs - Threaded - Standard
Studs - Threaded - Standard

Metric and imperial sizes. Steel and 303 stainless steel.

Yield strength 100,000 PSI. Tensile strength 125,000 PSI.


There is also a good range of Studs - Threaded - Standard on the Small Parts and Bearings website.

Castors Stud


Castors - Stud - Threaded - General Purpose - Swivel
Castors - Stud - Threaded - General Purpose - Swivel

Also see combined categories:
All Stud Type Castors


There is also a good range of Castors - Stud - Threaded - General Purpose - Swivel on the Small Parts and Bearings website.

Knobs Ball


Knobs - Ball - Threaded - Lateral Grooved
Knobs - Ball - Threaded - Lateral Grooved

Also see combined categories:
All Female Threaded Ball Knobs

Moulded platic control ball handles for machine tools, jigs, fixtures etc.

Stylish grooves to assist with grip. Brass threaded insert.


There is also a good range of Knobs - Ball - Threaded - Lateral Grooved on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Phenolic
Knobs - Ball - Threaded - Phenolic

Also see combined categories:
All Female Threaded Ball Knobs

Moulded from black or red phenolic resin.

Light Weight. Thermal insulating. Non corrosive.


There is also a good range of Knobs - Ball - Threaded - Phenolic on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Phenolic with Shank
Knobs - Ball - Threaded - Phenolic with Shank

Also see combined categories:
All Female Threaded Ball Knobs


There is also a good range of Knobs - Ball - Threaded - Phenolic with Shank on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Plastic with Groove
Knobs - Ball - Threaded - Plastic with Groove

Also see combined categories:
All Female Threaded Ball Knobs

Black plastic ball knobs with a groove around the circumference. Brass threaded insert.


There is also a good range of Knobs - Ball - Threaded - Plastic with Groove on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Plastic with Knurl
Knobs - Ball - Threaded - Plastic with Knurl

Also see combined categories:
All Female Threaded Ball Knobs

Brass threaded insert. Knurled circumference to assist with grip.


There is also a good range of Knobs - Ball - Threaded - Plastic with Knurl on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Polished Aluminium
Knobs - Ball - Threaded - Polished Aluminium

Also see combined categories:
All Female Threaded Ball Knobs

DIN319 Tapped aluminium

Polished with a flash chrome finish.


There is also a good range of Knobs - Ball - Threaded - Polished Aluminium on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Polished or Raw Brass
Knobs - Ball - Threaded - Polished or Raw Brass

Also see combined categories:
All Female Threaded Ball Knobs

CDA 360 Free Machining Brass

Polished balls are fully finished and suitable for decorative and display purposes.


There is also a good range of Knobs - Ball - Threaded - Polished or Raw Brass on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Polished Steel
Knobs - Ball - Threaded - Polished Steel

Also see combined categories:
All Female Threaded Ball Knobs

Low carbon steel 12L14


There is also a good range of Knobs - Ball - Threaded - Polished Steel on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Recessed Top
Knobs - Ball - Threaded - Recessed Top

Also see combined categories:
All Female Threaded Ball Knobs

Brass threaded insert. Phenolic.


There is also a good range of Knobs - Ball - Threaded - Recessed Top on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Soft Touch
Knobs - Ball - Threaded - Soft Touch

Also see combined categories:
All Female Threaded Ball Knobs

Rugged thermoplastic construction with a soft feel. Moulded with a soft rubber shell providing a sure grip. Zinc plated steel insert.


There is also a good range of Knobs - Ball - Threaded - Soft Touch on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Stainless Steel
Knobs - Ball - Threaded - Stainless Steel

Also see combined categories:
All Female Threaded Ball Knobs

303 stainless steel (European grade 1.4305)


There is also a good range of Knobs - Ball - Threaded - Stainless Steel on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Thermoplastic
Knobs - Ball - Threaded - Thermoplastic

Also see combined categories:
All Female Threaded Ball Knobs

With moulded plastic threads, or metalic threaded inserts - brass or steel.


There is also a good range of Knobs - Ball - Threaded - Thermoplastic on the Small Parts and Bearings website.

Knobs - Ball - Threaded - Wrench Flats and Knob-Lok
Knobs - Ball - Threaded - Wrench Flats and Knob-Lok

Also see combined categories:
All Female Threaded Ball Knobs

Unique Knob-Lok features a nylon locking element that resists vibration and prevents back-off

Perfect for high vibrational applications.


There is also a good range of Knobs - Ball - Threaded - Wrench Flats and Knob-Lok on the Small Parts and Bearings website.

Plungers Ball


Plungers - Ball - Threaded - 303 Stainless Steel
Plungers - Ball - Threaded - 303 Stainless Steel

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Ball - Threaded - 303 Stainless Steel on the Small Parts and Bearings website.

Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls
Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls on the Small Parts and Bearings website.

Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock
Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock

Also see combined categories:
All Threaded Ball Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock on the Small Parts and Bearings website.

Plungers - Ball - Threaded - Acetal Body and Nylon Ball
Plungers - Ball - Threaded - Acetal Body and Nylon Ball

Also see combined categories:
All Threaded Ball Plungers

For use in plastic applications or when the application requires as few metal parts as possible.

Electrical isolation. Highly durable acetal body with stainless steel spring allows use in corrosive environments. Plunger wrenches will not work with these.


There is also a good range of Plungers - Ball - Threaded - Acetal Body and Nylon Ball on the Small Parts and Bearings website.

Plungers - Ball - Threaded - Acetal Body with Stainless Ball
Plungers - Ball - Threaded - Acetal Body with Stainless Ball

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Ball - Threaded - Acetal Body with Stainless Ball on the Small Parts and Bearings website.

Plungers - Ball - Threaded - Steel
Plungers - Ball - Threaded - Steel

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Ball - Threaded - Steel on the Small Parts and Bearings website.

Plungers - Ball - Threaded - Steel Body - Nylon Ball
Plungers - Ball - Threaded - Steel Body - Nylon Ball

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Ball - Threaded - Steel Body - Nylon Ball on the Small Parts and Bearings website.

Plungers - Ball - Threaded - Steel Body - Stainless Ball
Plungers - Ball - Threaded - Steel Body - Stainless Ball

Also see combined categories:
All Threaded Ball Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Ball - Threaded - Steel Body - Stainless Ball on the Small Parts and Bearings website.

Plungers - Ball - Threaded - Steel - Threadlock
Plungers - Ball - Threaded - Steel - Threadlock

Also see combined categories:
All Threaded Ball Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Ball - Threaded - Steel - Threadlock on the Small Parts and Bearings website.

Plungers - Ball - Threaded - With Limit Switch
Plungers - Ball - Threaded - With Limit Switch

Also see combined categories:
All Threaded Ball Plungers

Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.

Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N. Working Temperature: -10 deg C to 80 deg C. Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA. Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long. Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings.


There is also a good range of Plungers - Ball - Threaded - With Limit Switch on the Small Parts and Bearings website.

Plungers Spring


Plungers - Spring - Threaded Adapter - Locking - Stainless
Plungers - Spring - Threaded Adapter - Locking - Stainless

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded Adapter - Locking - Stainless on the Small Parts and Bearings website.

Plungers - Spring - Threaded Adapter - Locking - Steel
Plungers - Spring - Threaded Adapter - Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded Adapter - Locking - Steel on the Small Parts and Bearings website.

Plungers - Spring - Threaded Adapter - Non Locking - Stainless
Plungers - Spring - Threaded Adapter - Non Locking - Stainless

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded Adapter - Non Locking - Stainless on the Small Parts and Bearings website.

Plungers - Spring - Threaded Adapter - Non Locking - Steel
Plungers - Spring - Threaded Adapter - Non Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded Adapter - Non Locking - Steel on the Small Parts and Bearings website.

Plungers - Spring - Threaded - Stainless
Plungers - Spring - Threaded - Stainless

Also see combined categories:
All Threaded Spring Plungers

303 Stainless Steel.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded - Stainless on the Small Parts and Bearings website.

Plungers - Spring - Threaded - Stainless-Acetal
Plungers - Spring - Threaded - Stainless-Acetal

Also see combined categories:
All Threaded Spring Plungers

303 Stainless Steel body and acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded - Stainless-Acetal on the Small Parts and Bearings website.

Plungers - Spring - Threaded - Stainless and Plastic
Plungers - Spring - Threaded - Stainless and Plastic

Also see combined categories:
All Threaded Spring Plungers

303 Stainless Steel.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded - Stainless and Plastic on the Small Parts and Bearings website.

Plungers - Spring - Threaded - Steel
Plungers - Spring - Threaded - Steel

Also see combined categories:
All Threaded Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded - Steel on the Small Parts and Bearings website.

Plungers - Spring - Threaded - Steel-Acetal
Plungers - Spring - Threaded - Steel-Acetal

Also see combined categories:
All Threaded Spring Plungers

Acetal nose with steel body

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded - Steel-Acetal on the Small Parts and Bearings website.

Plungers - Spring - Threaded - Steel-Acetal - Hex Nose
Plungers - Spring - Threaded - Steel-Acetal - Hex Nose

Also see combined categories:
All Threaded Spring Plungers

Steel body and acetal hex nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded - Steel-Acetal - Hex Nose on the Small Parts and Bearings website.

Plungers - Spring - Threaded - Steel and Plastic
Plungers - Spring - Threaded - Steel and Plastic

Also see combined categories:
All Threaded Spring Plungers

Plastic nose with steel body

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded - Steel and Plastic on the Small Parts and Bearings website.

Plungers - Spring - Threaded - Steel - Hex Nose
Plungers - Spring - Threaded - Steel - Hex Nose

Also see combined categories:
All Threaded Spring Plungers

Steel body and steel hex nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded - Steel - Hex Nose on the Small Parts and Bearings website.

Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose
Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose

Also see combined categories:
All Threaded Spring Plungers

Over 10 million cycles. Built to take the tough abuse of high speed, long run, stamping operations. Ideal for use as parts lifters in dies, or other applications requiring exceptional long life.

Special long life springs. Black oxide finished bodies. Nylon locking element. Not recommended for use in aluminium applications.


There is also a good range of Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose on the Small Parts and Bearings website.

Plungers - Spring - Threaded - Steel - Long Stroke
Plungers - Spring - Threaded - Steel - Long Stroke

Also see combined categories:
All Threaded Spring Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


There is also a good range of Plungers - Spring - Threaded - Steel - Long Stroke on the Small Parts and Bearings website.

Pins Pull


Pins - Pull - Threaded End - Aluminium and Steel
Pins - Pull - Threaded End - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.


There is also a good range of Pins - Pull - Threaded End - Aluminium and Steel on the Small Parts and Bearings website.

Pins - Pull - Threaded End - Stainless Steel
Pins - Pull - Threaded End - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.


There is also a good range of Pins - Pull - Threaded End - Stainless Steel on the Small Parts and Bearings website.

Pins - Pull - Threaded End - Steel
Pins - Pull - Threaded End - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.


There is also a good range of Pins - Pull - Threaded End - Steel on the Small Parts and Bearings website.

Spacers


Spacers - Hex - Threaded - 303-304 Stainless Steel
Spacers - Hex - Threaded - 303-304 Stainless Steel

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


There is also a good range of Spacers - Hex - Threaded - 303-304 Stainless Steel on the Small Parts and Bearings website.

Spacers - Hex - Threaded - 316 Stainless Steel
Spacers - Hex - Threaded - 316 Stainless Steel

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


There is also a good range of Spacers - Hex - Threaded - 316 Stainless Steel on the Small Parts and Bearings website.

Spacers - Hex - Threaded - Aluminium
Spacers - Hex - Threaded - Aluminium

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts.


There is also a good range of Spacers - Hex - Threaded - Aluminium on the Small Parts and Bearings website.

Spacers - Hex - Threaded - Brass
Spacers - Hex - Threaded - Brass

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts.

Most items are nickel plated. Refer details recorded against each item.


There is also a good range of Spacers - Hex - Threaded - Brass on the Small Parts and Bearings website.

Spacers - Hex - Threaded - Nylon
Spacers - Hex - Threaded - Nylon

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers.


There is also a good range of Spacers - Hex - Threaded - Nylon on the Small Parts and Bearings website.

Spacers - Hex - Threaded - Steel
Spacers - Hex - Threaded - Steel

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


There is also a good range of Spacers - Hex - Threaded - Steel on the Small Parts and Bearings website.

Spacers - Round - Threaded
Spacers - Round - Threaded

Brass or 303 Stainless Steel


There is also a good range of Spacers - Round - Threaded on the Small Parts and Bearings website.

Yoke Ends


Yoke Ends - Threaded
Yoke Ends - Threaded

Also see combined categories:
All Yoke Ends

Linkage Connectors

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:
Large Clevis Pins to suit these yokes
Other Clevis Joints
Other Clevis Pins

There is also a good range of Yoke Ends - Threaded on the Small Parts and Bearings website.

Bungs


Bungs - Round - Threaded
Bungs - Round - Threaded

Round tubing end inserts with a thread


There is also a good range of Bungs - Round - Threaded on the Small Parts and Bearings website.

Bungs - Square - Threaded
Bungs - Square - Threaded

Square tubing end inserts with a thread


There is also a good range of Bungs - Square - Threaded on the Small Parts and Bearings website.

Knobs Mushroom


Knobs - Mushroom Oval - Threaded - Phenolic
Knobs - Mushroom Oval - Threaded - Phenolic

Also see combined categories:
All Mushroom Knobs
All Knobs

Brass threaded insert.


There is also a good range of Knobs - Mushroom Oval - Threaded - Phenolic on the Small Parts and Bearings website.

Knobs - Mushroom Round - Threaded - Phenolic
Knobs - Mushroom Round - Threaded - Phenolic

Also see combined categories:
All Mushroom Knobs
All Knobs


There is also a good range of Knobs - Mushroom Round - Threaded - Phenolic on the Small Parts and Bearings website.

Eyebolts


Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel. No threads. No capacity rating as this will depend on your modifications.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


There is also a good range of Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel on the Small Parts and Bearings website.

Bolts - Eye - Full Threaded Shanks - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


There is also a good range of Bolts - Eye - Full Threaded Shanks - Carbon Steel on the Small Parts and Bearings website.

Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel
Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel

Also see combined categories:
All Eye Bolts

304 Stainless Steel

Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


There is also a good range of Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel on the Small Parts and Bearings website.

Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel on the Small Parts and Bearings website.

Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated

Also see combined categories:
All Eye Bolts

Forged zinc plated carbon steel.

Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


There is also a good range of Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated on the Small Parts and Bearings website.

Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel
Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel

Also see combined categories:
All Eye Bolts

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


There is also a good range of Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel on the Small Parts and Bearings website.

Bolts - Eye - Partially Threaded Shanks - Plain - Stainless Steel
Bolts - Eye - Partially Threaded Shanks - Plain - Stainless Steel

Also see combined categories:
All Eye Bolts

316 Stainless Steel

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


There is also a good range of Bolts - Eye - Partially Threaded Shanks - Plain - Stainless Steel on the Small Parts and Bearings website.

Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel

Also see combined categories:
All Eye Bolts

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


There is also a good range of Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel on the Small Parts and Bearings website.

Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel
Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel

Also see combined categories:
All Eye Bolts

316 Stainless Steel

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


There is also a good range of Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel on the Small Parts and Bearings website.

Pins Ball Lock


Pins - Ball Lock - Threaded End - Stainless Steel
Pins - Ball Lock - Threaded End - Stainless Steel

Also see combined categories:
All Ball Lock Pins with Threaded End

One end threaded so you can attach your own handle or knob. Also called detent pins.


There is also a good range of Pins - Ball Lock - Threaded End - Stainless Steel on the Small Parts and Bearings website.

Sleeves


Sleeves - Square Hole - Threaded - Carbon Steel
Sleeves - Square Hole - Threaded - Carbon Steel

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.


There is also a good range of Sleeves - Square Hole - Threaded - Carbon Steel on the Small Parts and Bearings website.

Shock Absorbers


Shock Absorbers - Full Threaded - Adjustable
Shock Absorbers - Full Threaded - Adjustable

Also see combined categories:
All Shock Absorbers


There is also a good range of Shock Absorbers - Full Threaded - Adjustable on the Small Parts and Bearings website.

Shock Absorbers - Full Threaded - Clevis Mounts
Shock Absorbers - Full Threaded - Clevis Mounts

Also see combined categories:
All Shock Absorbers


There is also a good range of Shock Absorbers - Full Threaded - Clevis Mounts on the Small Parts and Bearings website.

Shock Absorbers - Full Threaded - Low Velocity Adjustable
Shock Absorbers - Full Threaded - Low Velocity Adjustable

Also see combined categories:
All Shock Absorbers


There is also a good range of Shock Absorbers - Full Threaded - Low Velocity Adjustable on the Small Parts and Bearings website.

Shock Absorbers - Full Threaded - Soft Contact-Self-Compensating
Shock Absorbers - Full Threaded - Soft Contact-Self-Compensating

Also see combined categories:
All Shock Absorbers


There is also a good range of Shock Absorbers - Full Threaded - Soft Contact-Self-Compensating on the Small Parts and Bearings website.

Allthread


Studs - Full Thread - Steel
Studs - Full Thread - Steel

Also see combined categories:
All Studs

Low carbon steel allthread threaded bar

Short lengths of threaded low carbon steel bar.


There is also a good range of Studs - Full Thread - Steel on the Small Parts and Bearings website.

Studs - Full Thread - Stainless Steel
Studs - Full Thread - Stainless Steel

Also see combined categories:
All Studs

18-8 Stainless Steel Allthread Threaded Bar

Short lengths of threaded 18-8 stainless steel bar.


There is also a good range of Studs - Full Thread - Stainless Steel on the Small Parts and Bearings website.

Pins Dowel


Pins - Groove
Pins - Groove

Also see combined categories:
All Groove Pins

Non threaded press fit fastener that doesn't require a reamed hole as do dowel pins.Commonly used in place of taper pins.

An economic method of fastening without the need for precision drilled and reamed holes. Recommended hole tolerance is H11. Total length may be slightly longer than the nominal length. Expanded portion of the pin is compressed into the hole a few thousands of an inch wider than the nominal pin diameter. Radial forces lock the pin securely into the drilled hole.


There is also a good range of Pins - Groove on the Small Parts and Bearings website.

Spacers


Standoffs - Hexagonal
Standoffs - Hexagonal

Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.


There is also a good range of Standoffs - Hexagonal on the Small Parts and Bearings website.

Standoffs - Round
Standoffs - Round

Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.


There is also a good range of Standoffs - Round on the Small Parts and Bearings website.

Knobs Wing


Knobs - Wing - Female - Phenolic
Knobs - Wing - Female - Phenolic

Also see combined categories:
All Wing Knobs

Brass threaded insert


There is also a good range of Knobs - Wing - Female - Phenolic on the Small Parts and Bearings website.

Thread Inserts


Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:
Installation Tools

There is also a good range of Inserts - Self Tapping - For Aluminium - Steel on the Small Parts and Bearings website.

Inserts - Self Tapping - For Plastics - Steel
Inserts - Self Tapping - For Plastics - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Related Information:
Installation Tools

There is also a good range of Inserts - Self Tapping - For Plastics - Steel on the Small Parts and Bearings website.

Balls Metallic


Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI - Threaded
Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI - Threaded

Also see combined categories:
All Threaded Metallic Balls

Implant Grade can be used for Jewellery and Body Piercing. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent.

Precision Grade: 200. Plain. Composition Percentage: Al 5.5-6.5, V 3.5-4.5, N 0.03, C 0.08, H 0.013, Fe 0.25, O 0.13, Ti Balance. Grade 23 6Al-4V is a high strength titanium alloy. Tensile Strength 84.5kgf / mm2. Yield Strength 77.5kgf / mm2. Elongation 10 Percent. Threaded either 1-72 UNF or M1.2.

Related Information:
AFBMA Ball Grades
Other Types of Balls

There is also a good range of Balls - Titanium Alloy - Ti-Gr23 Ti-6Al4V-ELI - Threaded on the Small Parts and Bearings website.

Hooks


Hooks - Ball - Cup - 304 Stainless
Hooks - Ball - Cup - 304 Stainless

Polished finish. Threaded end for quick installation. Light and strong. Ideal in corrosive environments.


There is also a good range of Hooks - Ball - Cup - 304 Stainless on the Small Parts and Bearings website.

Hooks - Ball End - 304 Stainless
Hooks - Ball End - 304 Stainless

Polished finish. Threaded end for quick installation. Light and strong. Ideal in corrosive environments.


There is also a good range of Hooks - Ball End - 304 Stainless on the Small Parts and Bearings website.

Thread Inserts


Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:
Installation Tools

There is also a good range of Inserts - Self Tapping - For Aluminium - Stainless 303 on the Small Parts and Bearings website.

Inserts - Self Tapping - For Plastics - Stainless 303
Inserts - Self Tapping - For Plastics - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:
Installation Tools

There is also a good range of Inserts - Self Tapping - For Plastics - Stainless 303 on the Small Parts and Bearings website.

Inserts - Self Tapping - For Wood - Hex Drive
Inserts - Self Tapping - For Wood - Hex Drive

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.


There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive on the Small Parts and Bearings website.

Inserts - Self Tapping - For Wood - Slotted Drive
Inserts - Self Tapping - For Wood - Slotted Drive

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Related Information:
Installation Tools

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive on the Small Parts and Bearings website.

Hooks


Hooks - Ball - Half Cup - 304 Stainless
Hooks - Ball - Half Cup - 304 Stainless

Polished finish. Threaded end for quick installation. Light and strong. Ideal in corrosive environments.


There is also a good range of Hooks - Ball - Half Cup - 304 Stainless on the Small Parts and Bearings website.

Thread Inserts


Inserts - Self Tapping - For Wood - Hex Drive - Flanged
Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.


There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive - Flanged on the Small Parts and Bearings website.

Inserts - Self Tapping - For Wood - Slotted Drive - Short
Inserts - Self Tapping - For Wood - Slotted Drive - Short

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole.


There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive - Short on the Small Parts and Bearings website.

Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122785 products in 2708 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 122785 products in 2708 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.