Thread Inserts Categories
Inserts - Thread Repair - EZ-Lok - Individual Kits
Contains 20 inserts per kit along with a standard tap, drill bit and installation tool. Installation tool is not needed but will make multiple installations easier.
Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.
Related Information:
There is also a good range of Inserts - Thread Repair - EZ-Lok - Individual Kits on the Small Parts and Bearings website.
Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel
Easy to install with a standard tap, bolt and wrench.
Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.
Related Information:
There is also a good range of Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel on the Small Parts and Bearings website.
Inserts - Thread Repair - EZ-Lok - Solid Stainless Steel
Easy to install with a standard tap, bolt and wrench.
Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Simply drill and tap the hole to suit the external thread. Install with a bolt and wrench. Metric, UNC and UNF.
Related Information:
There is also a good range of Inserts - Thread Repair - EZ-Lok - Solid Stainless Steel on the Small Parts and Bearings website.
Inserts - Thread Repair - Helicoil
Replacement helicoil inserts for after you have purchased a starter kit or tools separately.
Stainless 18-8 inserts with a hardness of RC43-50 and tensile strength above 200,000 PSI. Metric and Imperial available. Screw locking inserts have a series of straight segments to provide self-locking torque on the bolt, eliminating a need for other threadlocking methods.
There is also a good range of Inserts - Thread Repair - Helicoil on the Small Parts and Bearings website.
Inserts - Thread Repair - Helicoil Extracting Tools
Extracting tools are used to remove helicoil inserts. This is done by applying the tool to the insert, striking the tools head and turning it counter-clockwide.
There is also a good range of Inserts - Thread Repair - Helicoil Extracting Tools on the Small Parts and Bearings website.
Inserts - Thread Repair - Helicoil Installation Tools
Tools for helicoil inserts include economy style and production style prewinder and threaded mandrel types
There is also a good range of Inserts - Thread Repair - Helicoil Installation Tools on the Small Parts and Bearings website.
Inserts - Thread Repair - Helicoil Starter Sets
Helicoil sets include 3 lengths of 1x, 1.5x and 2x the thread diameter. Also included is a tap, an installation tool, a drill and a tang removal tool packed in a sturdy plastic case.
Stainless inserts. Full instructions included. Helicoil kits include a prewinder tool for fine threads or a threaded mandrel for course and metric threads. Metric and Imperial available.
There is also a good range of Inserts - Thread Repair - Helicoil Starter Sets on the Small Parts and Bearings website.
Inserts - Thread Repair - Helicoil Tang Breakoff Tools
The driving tangs of helicoil inserts must be removed to prevent interference with the end of the assembled screw. For inserts over 1/2 inch use long nosed pliers.
There is also a good range of Inserts - Thread Repair - Helicoil Tang Breakoff Tools on the Small Parts and Bearings website.
Inserts - Thread Repair - Keylocking
Steel or 303 Stainless Steel as indicated in the tables. Also known as keenserts.
Steel or 303 Stainless Steel as indicated in the tables. Maximum strength and reliability. Positive mechanical lock against rotation:. The insert kees are driven down into the tapped threads of the parent material during installation to securely lock the insert against rotation. Inserts with internal thread lock are designed to securely lock a bolt when it is entered into the insert only a few turns.
Related Information:
There is also a good range of Inserts - Thread Repair - Keylocking on the Small Parts and Bearings website.
Inserts - Thread Repair - Keylocking Assortment Kits
Also known as keenserts.
Related Information:
There is also a good range of Inserts - Thread Repair - Keylocking Assortment Kits on the Small Parts and Bearings website.
Inserts - Thread Repair - Keylocking Insertion Tools
Used to insert keylocking inserts - keensert style. Keylocking inserts can be wound in without these tools but the tools make the job much easier. Also known as keenserts.
Related Information:
There is also a good range of Inserts - Thread Repair - Keylocking Insertion Tools on the Small Parts and Bearings website.
Inserts - Thread Repair - Keylocking Starter Sets
Keylocking inserts are used to repair threads by tapping the worn thread to a standard larger thread, twisting the insert into place and then driving in the keys to lock the insert. Also known as keenserts.
Each kit contains an installation tool and the quantity of inserts shown. One size per kit. Also known as keenserts, keylocking inserts are available in mild steel and stainless steel. Installation is by drilling out the old thread, countersinking, tapping new thread with a standard tap, screwing the insert until slightly below the surface, then tapping down the keys using the tool supplied and a hammer.
Related Information:
There is also a good range of Inserts - Thread Repair - Keylocking Starter Sets on the Small Parts and Bearings website.
Inserts - Thread Repair - Recoil
Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.
Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.
There is also a good range of Inserts - Thread Repair - Recoil on the Small Parts and Bearings website.
Inserts - Thread Repair - Recoil Starter Sets
Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.
Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.
There is also a good range of Inserts - Thread Repair - Recoil Starter Sets on the Small Parts and Bearings website.
Tools - Thread Insert - Power Drive - EZ-Lok
Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.
There is also a good range of Tools - Thread Insert - Power Drive - EZ-Lok on the Small Parts and Bearings website.
Inserts - Expansion - Press In - Brass
Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.
Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability. Not as strong as wind-in inserts.
There is also a good range of Inserts - Expansion - Press In - Brass on the Small Parts and Bearings website.
Inserts - Rivet Nuts - Klik - Ribbed
Individual Inserts for use with the Klik Thread Setter Tool
These blind threaded inserts offer strong torque and pull out characteristics. Especially effective in sheet metal and other thin material. Insert is placed into the hole in the parent material and crimped up with the installation tool. Installs from one side - no tapping required. Installs almost flush eliminating the need for countersinking. Made from plated steel.
Related Information:
There is also a good range of Inserts - Rivet Nuts - Klik - Ribbed on the Small Parts and Bearings website.
Inserts - Rivet Nuts - Klik - Standard
Individual Inserts for use with the Klik Thread Setter Tool
These threaded inserts can be used in blind or through hole applications. Featuring a heavy duty thread profile and increased thickness in the collapse area. Steel with cadmium plating.
Related Information:
There is also a good range of Inserts - Rivet Nuts - Klik - Standard on the Small Parts and Bearings website.
Inserts - Rivet Nuts - Klik - Threadsert
Individual Inserts for use with the Klik Thread Setter Tool
These threaded inserts can be used in blind or through hole applications. Can be used in almost any material over 2.38mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material. Can be pressed or otherwise compressed manually with a hammer for quick installation jobs in sheet material. Tools are available for assembly in blind holes or production assembly. Email us for a price on tools.
There is also a good range of Inserts - Rivet Nuts - Klik - Threadsert on the Small Parts and Bearings website.
Inserts - Expansion - Press In - Brass - Flanged
Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.
Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability. Not as strong as wind-in inserts.
There is also a good range of Inserts - Expansion - Press In - Brass - Flanged on the Small Parts and Bearings website.
Inserts - Self Tapping - For Aluminium - Steel
Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.
Related Information:
There is also a good range of Inserts - Self Tapping - For Aluminium - Steel on the Small Parts and Bearings website.
Inserts - Self Tapping - For Plastics - Steel
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.
Related Information:
There is also a good range of Inserts - Self Tapping - For Plastics - Steel on the Small Parts and Bearings website.
Inserts - Expansion - Press In - 303 Stainless - Flanged
Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.
Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.
There is also a good range of Inserts - Expansion - Press In - 303 Stainless - Flanged on the Small Parts and Bearings website.
Inserts - Expansion - Press In - 303 Stainless Steel
Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.
Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.
There is also a good range of Inserts - Expansion - Press In - 303 Stainless Steel on the Small Parts and Bearings website.
Inserts - Self Tapping - For Aluminium - Stainless 303
Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.
Related Information:
There is also a good range of Inserts - Self Tapping - For Aluminium - Stainless 303 on the Small Parts and Bearings website.
Inserts - Self Tapping - For Plastics - Stainless Steel
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Standard made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.
Related Information:
There is also a good range of Inserts - Self Tapping - For Plastics - Stainless Steel on the Small Parts and Bearings website.
Inserts - Self Tapping - For Wood - Hex Drive
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.
There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive on the Small Parts and Bearings website.
Inserts - Self Tapping - For Wood - Slotted Drive
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.
Related Information:
There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive on the Small Parts and Bearings website.
Inserts - Self Tapping - For Wood - Hex Drive - Flanged
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.
There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive - Flanged on the Small Parts and Bearings website.
Inserts - Self Tapping - For Wood - Slotted Drive - Short
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole.
There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive - Short on the Small Parts and Bearings website.
Inserts - Tapered Fit - Finserts - For Wood and Plastics
Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening is ensured.
The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness. Finserts prevent splintering, splitting and thread pullout.
There is also a good range of Inserts - Tapered Fit - Finserts - For Wood and Plastics on the Small Parts and Bearings website.
You may also be interested in
Assortments
Inserts - Thread Repair - EZ-Lok - Selection Kits
Contains a selection of E-Z Lok inserts
Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.
Related Information:
There is also a good range of Inserts - Thread Repair - EZ-Lok - Selection Kits on the Small Parts and Bearings website.
Tools Threading
Tools - Installation - For Self Tapping Inserts
Installation tools for self tapping thread inserts - see the linked inserts categories
Related Information:
There is also a good range of Tools - Installation - For Self Tapping Inserts on the Small Parts and Bearings website.
Knobs Ball
Knobs - Ball - Threaded - Recessed Top
Brass threaded insert. Phenolic.
Related Information:
There is also a good range of Knobs - Ball - Threaded - Recessed Top on the Small Parts and Bearings website.
Knobs - Ball - Threaded - Plastic with Knurl
Brass threaded insert. Knurled circumference to assist with grip.
Related Information:
There is also a good range of Knobs - Ball - Threaded - Plastic with Knurl on the Small Parts and Bearings website.
Knobs Mushroom
Knobs - Mushroom Oval - Threaded - Phenolic
Brass threaded insert.
Related Information:
There is also a good range of Knobs - Mushroom Oval - Threaded - Phenolic on the Small Parts and Bearings website.
Knobs Ball
Knobs - Ball - Threaded - Thermoplastic
With moulded plastic threads, or metalic threaded inserts - brass or steel.
Related Information:
There is also a good range of Knobs - Ball - Threaded - Thermoplastic on the Small Parts and Bearings website.
Tools Threading
Tools - Taps - High Speed Steel - Helicoil
Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.
There is also a good range of Tools - Taps - High Speed Steel - Helicoil on the Small Parts and Bearings website.
Knobs Ball
Knobs - Ball - Threaded - Soft Touch
Rugged thermoplastic construction with a soft feel. Moulded with a soft rubber shell providing a sure grip. Zinc plated steel insert.
Related Information:
There is also a good range of Knobs - Ball - Threaded - Soft Touch on the Small Parts and Bearings website.
Knobs Lever
Knobs - Lever - Through Bore
Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert.
Related Information:
There is also a good range of Knobs - Lever - Through Bore on the Small Parts and Bearings website.
Knobs Oval
Knobs - Oval Tapered - Press On - Phenolic
Also see combined categories:
All Knobs
All Knobs
Press on knobs hold on securely without threads or set screws
Shaft diameter should be +0.000 / - 0.076 mm for best performance. Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs. Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside.
Related Information:
There is also a good range of Knobs - Oval Tapered - Press On - Phenolic on the Small Parts and Bearings website.
Mounts - Vibration - Isolation Pads - General Purpose
For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.
Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.
Related Information:
There is also a good range of Mounts - Vibration - Isolation Pads - General Purpose on the Small Parts and Bearings website.
Threaded Rod - Allthread - Plastic
UNC - UNF - METRIC - Nylon and PVC. Also known as booker rod.
Light Weight. Non Corrosive. Vibration Resistant.
There is also a good range of Threaded Rod - Allthread - Plastic on the Small Parts and Bearings website.
Threaded Rod - Allthread - Stainless Steel - 304
UNC - UNF - METRIC - 303 and 304 grades. Also known as booker rod.
There is also a good range of Threaded Rod - Allthread - Stainless Steel - 304 on the Small Parts and Bearings website.
Threaded Rod - Allthread - Stainless Steel - 316
UNC - UNF - METRIC - 316 grade. Also known as booker rod.
There is also a good range of Threaded Rod - Allthread - Stainless Steel - 316 on the Small Parts and Bearings website.
Threaded Rod - Allthread - Steel - Plain
UNC - UNF - METRIC - BSW - Includes plain mild steel and high tensile. Also known as booker rod.
There is also a good range of Threaded Rod - Allthread - Steel - Plain on the Small Parts and Bearings website.
Threaded Rod - Allthread - Steel - Zinc Plated
UNC - UNF - METRIC - BSW. Also known as booker rod.
There is also a good range of Threaded Rod - Allthread - Steel - Zinc Plated on the Small Parts and Bearings website.
Threaded Rod - Unthreaded Centre - Steel
UNC Small range only. Threaded each end 38.1mm (1.5 inches) and unthreaded in the centre.
Related Information:
There is also a good range of Threaded Rod - Unthreaded Centre - Steel on the Small Parts and Bearings website.
Collars - Threaded - Clamp Type - Stainless Steel
Offer full radial holding power without marring the shaft.
Related Information:
There is also a good range of Collars - Threaded - Clamp Type - Stainless Steel on the Small Parts and Bearings website.
Collars - Threaded - Clamp Type - Steel
Offer full radial holding power without marring the shaft.
Related Information:
There is also a good range of Collars - Threaded - Clamp Type - Steel on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125386 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
