Miniature Bearings Australia Pty Ltd

THREAD CATEGORIES


Thread - Kevlar
Thread - Kevlar


Super strong kevlar thread


There is also a good range of Thread - Kevlar on the Small Parts and Bearings website.


Threaded Rod


Threaded Rod - Unthreaded Centre - Steel
Threaded Rod - Unthreaded Centre - Steel

Also see combined categories:
All Threaded Rod

UNC Small range only. Threaded each end 38.1mm (1.5 inches) and unthreaded in the centre.


Related Information:

There is also a good range of Threaded Rod - Unthreaded Centre - Steel on the Small Parts and Bearings website.


Thread Inserts


Inserts - Thread Repair - EZ-Lok - Individual Kits
Inserts - Thread Repair - EZ-Lok - Individual Kits

Also see combined categories:
All EZ Lok inserts and Kits

Contains 20 inserts per kit along with a standard tap, drill bit and installation tool. Installation tool is not needed but will make multiple installations easier.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

There is also a good range of Inserts - Thread Repair - EZ-Lok - Individual Kits on the Small Parts and Bearings website.


Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel
Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel

Also see combined categories:
All EZ Lok inserts and Kits

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

There is also a good range of Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel on the Small Parts and Bearings website.


Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel
Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel

Also see combined categories:
All EZ Lok inserts and Kits

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

There is also a good range of Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel on the Small Parts and Bearings website.


Inserts - Thread Repair - Helicoil
Inserts - Thread Repair - Helicoil

Also see combined categories:
All Helicoil Inserts and Kits

Replacement helicoil inserts for after you have purchased a starter kit or tools separately.

Stainless 18-8 inserts with a hardness of RC43-50 and tensile strength above 200,000 PSI. Metric and Imperial available. Screw locking inserts have a series of straight segments to provide self-locking torque on the bolt, eliminating a need for other threadlocking methods.

There is also a good range of Inserts - Thread Repair - Helicoil on the Small Parts and Bearings website.


Inserts - Thread Repair - Helicoil Extracting Tools
Inserts - Thread Repair - Helicoil Extracting Tools


Extracting tools are used to remove helicoil inserts. This is done by applying the tool to the insert, striking the tools head and turning it counter-clockwide.


There is also a good range of Inserts - Thread Repair - Helicoil Extracting Tools on the Small Parts and Bearings website.


Inserts - Thread Repair - Helicoil Installation Tools
Inserts - Thread Repair - Helicoil Installation Tools


Tools for helicoil inserts include economy style and production style prewinder and threaded mandrel types


There is also a good range of Inserts - Thread Repair - Helicoil Installation Tools on the Small Parts and Bearings website.


Inserts - Thread Repair - Helicoil Starter Sets
Inserts - Thread Repair - Helicoil Starter Sets

Also see combined categories:
All Helicoil Inserts and Kits

Helicoil sets include 3 lengths of 1x, 1.5x and 2x the thread diameter. Also included is a tap, an installation tool, a drill and a tang removal tool packed in a sturdy plastic case.

Stainless inserts. Full instructions included. Helicoil kits include a prewinder tool for fine threads or a threaded mandrel for course and metric threads. Metric and Imperial available.

There is also a good range of Inserts - Thread Repair - Helicoil Starter Sets on the Small Parts and Bearings website.


Inserts - Thread Repair - Helicoil Tang Breakoff Tools
Inserts - Thread Repair - Helicoil Tang Breakoff Tools


The driving tangs of helicoil inserts must be removed to prevent interference with the end of the assembled screw. For inserts over 1/2 inch use long nosed pliers.


There is also a good range of Inserts - Thread Repair - Helicoil Tang Breakoff Tools on the Small Parts and Bearings website.


Inserts - Thread Repair - Keylocking
Inserts - Thread Repair - Keylocking

Also see combined categories:
All Keylocking Inserts and Kits

Steel or 303 Stainless Steel as indicated in the tables. Also known as keenserts.

Steel or 303 Stainless Steel as indicated in the tables. Maximum strength and reliability. Positive mechanical lock against rotation:. The insert kees are driven down into the tapped threads of the parent material during installation to securely lock the insert against rotation. Inserts with internal thread lock are designed to securely lock a bolt when it is entered into the insert only a few turns.

Related Information:

There is also a good range of Inserts - Thread Repair - Keylocking on the Small Parts and Bearings website.


Inserts - Thread Repair - Keylocking Assortment Kits
Inserts - Thread Repair - Keylocking Assortment Kits

Also see combined categories:
All Keylocking Inserts and Kits

Also known as keenserts.


Related Information:

There is also a good range of Inserts - Thread Repair - Keylocking Assortment Kits on the Small Parts and Bearings website.


Inserts - Thread Repair - Keylocking Insertion Tools
Inserts - Thread Repair - Keylocking Insertion Tools


Used to insert keylocking inserts - keensert style. Keylocking inserts can be wound in without these tools but the tools make the job much easier. Also known as keenserts.


Related Information:

There is also a good range of Inserts - Thread Repair - Keylocking Insertion Tools on the Small Parts and Bearings website.


Inserts - Thread Repair - Keylocking Starter Sets
Inserts - Thread Repair - Keylocking Starter Sets

Also see combined categories:
All Keylocking Inserts and Kits

Keylocking inserts are used to repair threads by tapping the worn thread to a standard larger thread, twisting the insert into place and then driving in the keys to lock the insert. Also known as keenserts.

Each kit contains an installation tool and the quantity of inserts shown. One size per kit. Also known as keenserts, keylocking inserts are available in mild steel and stainless steel. Installation is by drilling out the old thread, countersinking, tapping new thread with a standard tap, screwing the insert until slightly below the surface, then tapping down the keys using the tool supplied and a hammer.

Related Information:

There is also a good range of Inserts - Thread Repair - Keylocking Starter Sets on the Small Parts and Bearings website.


Inserts - Thread Repair - Recoil
Inserts - Thread Repair - Recoil

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.

Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

There is also a good range of Inserts - Thread Repair - Recoil on the Small Parts and Bearings website.


Inserts - Thread Repair - Recoil Starter Sets
Inserts - Thread Repair - Recoil Starter Sets

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.

Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

There is also a good range of Inserts - Thread Repair - Recoil Starter Sets on the Small Parts and Bearings website.


Tools - Thread Insert - Power Drive - EZ-Lok
Tools - Thread Insert - Power Drive - EZ-Lok

Also see combined categories:
All Tools

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.


There is also a good range of Tools - Thread Insert - Power Drive - EZ-Lok on the Small Parts and Bearings website.


Inserts - Expansion - Press In - Brass
Inserts - Expansion - Press In - Brass

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability. Not as strong as wind-in inserts.

There is also a good range of Inserts - Expansion - Press In - Brass on the Small Parts and Bearings website.


Inserts - Rivet Nuts - Klik - Ribbed
Inserts - Rivet Nuts - Klik - Ribbed

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These blind threaded inserts offer strong torque and pull out characteristics. Especially effective in sheet metal and other thin material. Insert is placed into the hole in the parent material and crimped up with the installation tool. Installs from one side - no tapping required. Installs almost flush eliminating the need for countersinking. Made from plated steel.

Related Information:

There is also a good range of Inserts - Rivet Nuts - Klik - Ribbed on the Small Parts and Bearings website.


Inserts - Rivet Nuts - Klik - Standard
Inserts - Rivet Nuts - Klik - Standard

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Featuring a heavy duty thread profile and increased thickness in the collapse area. Steel with cadmium plating.

Related Information:

There is also a good range of Inserts - Rivet Nuts - Klik - Standard on the Small Parts and Bearings website.


Inserts - Rivet Nuts - Klik - Threadsert
Inserts - Rivet Nuts - Klik - Threadsert

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Can be used in almost any material over 2.38mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material. Can be pressed or otherwise compressed manually with a hammer for quick installation jobs in sheet material. Tools are available for assembly in blind holes or production assembly. Email us for a price on tools.

There is also a good range of Inserts - Rivet Nuts - Klik - Threadsert on the Small Parts and Bearings website.


Inserts - Expansion - Press In - Brass - Flanged
Inserts - Expansion - Press In - Brass - Flanged

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability. Not as strong as wind-in inserts.

There is also a good range of Inserts - Expansion - Press In - Brass - Flanged on the Small Parts and Bearings website.


Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

There is also a good range of Inserts - Self Tapping - For Aluminium - Steel on the Small Parts and Bearings website.


Inserts - Self Tapping - For Plastics - Steel
Inserts - Self Tapping - For Plastics - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Related Information:

There is also a good range of Inserts - Self Tapping - For Plastics - Steel on the Small Parts and Bearings website.


Inserts - Expansion - Press In - 303 Stainless - Flanged
Inserts - Expansion - Press In - 303 Stainless - Flanged

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.

There is also a good range of Inserts - Expansion - Press In - 303 Stainless - Flanged on the Small Parts and Bearings website.


Inserts - Expansion - Press In - 303 Stainless Steel
Inserts - Expansion - Press In - 303 Stainless Steel

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.

There is also a good range of Inserts - Expansion - Press In - 303 Stainless Steel on the Small Parts and Bearings website.


Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

There is also a good range of Inserts - Self Tapping - For Aluminium - Stainless 303 on the Small Parts and Bearings website.


Inserts - Self Tapping - For Plastics - Stainless 303
Inserts - Self Tapping - For Plastics - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:

There is also a good range of Inserts - Self Tapping - For Plastics - Stainless 303 on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Hex Drive
Inserts - Self Tapping - For Wood - Hex Drive

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Slotted Drive
Inserts - Self Tapping - For Wood - Slotted Drive

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Related Information:

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Hex Drive - Flanged
Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

There is also a good range of Inserts - Self Tapping - For Wood - Hex Drive - Flanged on the Small Parts and Bearings website.


Inserts - Self Tapping - For Wood - Slotted Drive - Short
Inserts - Self Tapping - For Wood - Slotted Drive - Short

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole.

There is also a good range of Inserts - Self Tapping - For Wood - Slotted Drive - Short on the Small Parts and Bearings website.


Inserts - Tapered Fit - Finserts - For Wood and Plastics
Inserts - Tapered Fit - Finserts - For Wood and Plastics


Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening is ensured.

The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness. Finserts prevent splintering, splitting and thread pullout.

There is also a good range of Inserts - Tapered Fit - Finserts - For Wood and Plastics on the Small Parts and Bearings website.


You may also be interested in

Tools Threading


Tools - Thread Repair
Tools - Thread Repair

Also see combined categories:
All Tools

Quickly repairs damaged screws

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

There is also a good range of Tools - Thread Repair on the Small Parts and Bearings website.


Tools - Die Holders
Tools - Die Holders

Also see combined categories:
All Tools

Bar and round holders. 16mm, 20.64mm and 25.4mm (inch). Also called a button die stock.


There is also a good range of Tools - Die Holders on the Small Parts and Bearings website.


Tools - Die Nuts
Tools - Die Nuts

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.


There is also a good range of Tools - Die Nuts on the Small Parts and Bearings website.


Tools - Tap Wrenches
Tools - Tap Wrenches

Also see combined categories:
All Tools

Tee handle and bar types. Suit taps from 1mm to 12mm.


There is also a good range of Tools - Tap Wrenches on the Small Parts and Bearings website.


Tools - Dies - Carbon Steel
Tools - Dies - Carbon Steel

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.


There is also a good range of Tools - Dies - Carbon Steel on the Small Parts and Bearings website.


Tools - Dies - High Speed Steel
Tools - Dies - High Speed Steel

Also see combined categories:
All Dies
All Tools

High Speed Steel Button Dies


There is also a good range of Tools - Dies - High Speed Steel on the Small Parts and Bearings website.


Tools - Taps - Carbon Steel - Hand
Tools - Taps - Carbon Steel - Hand

Also see combined categories:
All Taps
All Tools

Carbon Steel Straight Flute Taps. Starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

Carbon steel hand taps. Carbon Steel (CS) Hand taps.

There is also a good range of Tools - Taps - Carbon Steel - Hand on the Small Parts and Bearings website.


Tools - Installation - For Self Tapping Inserts

Also see combined categories:
All Tools

Installation tools for self tapping thread inserts - see the linked inserts categories


Related Information:

There is also a good range of Tools - Installation - For Self Tapping Inserts on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - Extension
Tools - Taps - High Speed Steel - Extension

Also see combined categories:
All Taps
All Tools

Intermediate small shank spiral point extension taps 150mm long


There is also a good range of Tools - Taps - High Speed Steel - Extension on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - Hand
Tools - Taps - High Speed Steel - Hand

Also see combined categories:
All Taps
All Tools

High Speed Steel Short Machine Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

High Speed Steel (HSS) Short Machine taps.

There is also a good range of Tools - Taps - High Speed Steel - Hand on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - Helicoil
Tools - Taps - High Speed Steel - Helicoil

Also see combined categories:
All Taps
All Tools

Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.


There is also a good range of Tools - Taps - High Speed Steel - Helicoil on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - Hand - Sets
Tools - Taps - High Speed Steel - Hand - Sets

Also see combined categories:
All Taps
All Tools

Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set

High Speed Steel (HSS) Short Machine taps.

There is also a good range of Tools - Taps - High Speed Steel - Hand - Sets on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - NPT Pipe
Tools - Taps - High Speed Steel - NPT Pipe

Also see combined categories:
All Taps
All Tools

Taper Pipe Taps


There is also a good range of Tools - Taps - High Speed Steel - NPT Pipe on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - Spiral Flute
Tools - Taps - High Speed Steel - Spiral Flute

Also see combined categories:
All Taps
All Tools

Metric spiral flute taps. Ground thread. 50o helix.


There is also a good range of Tools - Taps - High Speed Steel - Spiral Flute on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - Spiral Point
Tools - Taps - High Speed Steel - Spiral Point

Also see combined categories:
All Taps
All Tools

Metric intermediate ground thread high speed steel taps. Also called gun taps.


There is also a good range of Tools - Taps - High Speed Steel - Spiral Point on the Small Parts and Bearings website.


Tools - Mandrels and Nosepieces - For Klik Rivet Nuts
Tools - Mandrels and Nosepieces - For Klik Rivet Nuts

Also see combined categories:
All Tools

Required for Thread Setter Tool

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

Related Information:

There is also a good range of Tools - Mandrels and Nosepieces - For Klik Rivet Nuts on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - NPT Pipe - Interrupted
Tools - Taps - High Speed Steel - NPT Pipe - Interrupted

Also see combined categories:
All Taps
All Tools

Taper Pipe Taps


There is also a good range of Tools - Taps - High Speed Steel - NPT Pipe - Interrupted on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122229 products in 2651 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122229 products in 2651 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.