About Us Brands Download Contact Counter Sales Distributors FAQ Freight Payments Products Search Site Technical More Links...

Thread Inserts Categories No Pictures


Category Matches

Thread Inserts

TopShow Pictures

Inserts - Thread Repair - EZ-Lok - Individual Kits

Search Rating: 100%

Also see combined categories:
All EZ Lok inserts and Kits

Contains 20 inserts per kit along with a standard tap, drill bit and installation tool. Installation tool is not needed but will make multiple installations easier.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - EZ-Lok - Individual Kits.

Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel

Search Rating: 100%

Also see combined categories:
All EZ Lok inserts and Kits

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel.

Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel

Search Rating: 100%

Also see combined categories:
All EZ Lok inserts and Kits

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel.

Inserts - Thread Repair - Helicoil

Search Rating: 100%

Also see combined categories:
All Helicoil Inserts and Kits

Replacement helicoil inserts for after you have purchased a starter kit or tools separately.

Stainless 18-8 inserts with a hardness of RC43-50 and tensile strength above 200,000 PSI. Metric and Imperial available. Screw locking inserts have a series of straight segments to provide self-locking torque on the bolt, eliminating a need for other threadlocking methods.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Helicoil.

Inserts - Thread Repair - Helicoil Extracting Tools

Search Rating: 100%

Extracting tools are used to remove helicoil inserts. This is done by applying the tool to the insert, striking the tools head and turning it counter-clockwide.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Helicoil Extracting Tools.

Inserts - Thread Repair - Helicoil Installation Tools

Search Rating: 100%

Tools for helicoil inserts include economy style and production style prewinder and threaded mandrel types


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Helicoil Installation Tools.

Inserts - Thread Repair - Helicoil Starter Sets

Search Rating: 100%

Also see combined categories:
All Helicoil Inserts and Kits

Helicoil sets include 3 lengths of 1x, 1.5x and 2x the thread diameter. Also included is a tap, an installation tool, a drill and a tang removal tool packed in a sturdy plastic case.

Stainless inserts. Full instructions included. Helicoil kits include a prewinder tool for fine threads or a threaded mandrel for course and metric threads. Metric and Imperial available.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Helicoil Starter Sets.

Inserts - Thread Repair - Helicoil Tang Breakoff Tools

Search Rating: 100%

The driving tangs of helicoil inserts must be removed to prevent interference with the end of the assembled screw. For inserts over 1/2 inch use long nosed pliers.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Helicoil Tang Breakoff Tools.

Inserts - Thread Repair - Keylocking

Search Rating: 100%

Also see combined categories:
All Keylocking Inserts and Kits

Steel or 303 Stainless Steel as indicated in the tables. Also known as keenserts.

Steel or 303 Stainless Steel as indicated in the tables. Maximum strength and reliability. Positive mechanical lock against rotation:. The insert kees are driven down into the tapped threads of the parent material during installation to securely lock the insert against rotation. Inserts with internal thread lock are designed to securely lock a bolt when it is entered into the insert only a few turns.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Keylocking.

Inserts - Thread Repair - Keylocking Assortment Kits

Search Rating: 100%

Also see combined categories:
All Keylocking Inserts and Kits

Also known as keenserts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Keylocking Assortment Kits.

Inserts - Thread Repair - Keylocking Insertion Tools

Search Rating: 100%

Used to insert keylocking inserts - keensert style. Keylocking inserts can be wound in without these tools but the tools make the job much easier. Also known as keenserts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Keylocking Insertion Tools.

Inserts - Thread Repair - Keylocking Starter Sets

Search Rating: 100%

Also see combined categories:
All Keylocking Inserts and Kits

Keylocking inserts are used to repair threads by tapping the worn thread to a standard larger thread, twisting the insert into place and then driving in the keys to lock the insert. Also known as keenserts.

Each kit contains an installation tool and the quantity of inserts shown. One size per kit. Also known as keenserts, keylocking inserts are available in mild steel and stainless steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Keylocking Starter Sets.

Inserts - Thread Repair - Recoil

Search Rating: 100%

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.

Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Recoil.

Inserts - Thread Repair - Recoil Starter Sets

Search Rating: 100%

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.

Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - Recoil Starter Sets.

Tools - Thread Insert - Power Drive - EZ-Lok

Search Rating: 99%

Also see combined categories:
All Tools

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Thread Insert - Power Drive - EZ-Lok.

Inserts - Expansion - Press In - Brass

Search Rating: 99%

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability. Not as strong as wind-in inserts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Expansion - Press In - Brass.

Inserts - Rivet Nuts - Klik - Ribbed

Search Rating: 99%

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These blind threaded inserts offer strong torque and pull out characteristics. Especially effective in sheet metal and other thin material. Insert is placed into the hole in the parent material and crimped up with the installation tool. Installs from one side - no tapping required. Installs almost flush eliminating the need for countersinking. Made from plated steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Rivet Nuts - Klik - Ribbed.

Inserts - Rivet Nuts - Klik - Standard

Search Rating: 99%

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Featuring a heavy duty thread profile and increased thickness in the collapse area. Steel with cadmium plating.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Rivet Nuts - Klik - Standard.

Inserts - Rivet Nuts - Klik - Threadsert

Search Rating: 99%

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Can be used in almost any material over 0.8mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Rivet Nuts - Klik - Threadsert.

Inserts - Expansion - Press In - Brass - Flanged

Search Rating: 99%

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability. Not as strong as wind-in inserts.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Expansion - Press In - Brass - Flanged.

Inserts - Self Tapping - For Aluminium - Steel

Search Rating: 99%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Aluminium - Steel.

Inserts - Self Tapping - For Plastics - Steel

Search Rating: 99%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Plastics - Steel.

Inserts - Expansion - Press In - 303 Stainless - Flanged

Search Rating: 98%

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Expansion - Press In - 303 Stainless - Flanged.

Inserts - Expansion - Press In - 303 Stainless Steel

Search Rating: 98%

Also see combined categories:
All Expansion Inserts

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Expansion - Press In - 303 Stainless Steel.

Inserts - Self Tapping - For Aluminium - Stainless 303

Search Rating: 98%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Aluminium - Stainless 303.

Inserts - Self Tapping - For Plastics - Stainless 303

Search Rating: 98%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Plastics - Stainless 303.

Inserts - Self Tapping - For Wood - Hex Drive

Search Rating: 98%

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Wood - Hex Drive.

Inserts - Self Tapping - For Wood - Slotted Drive

Search Rating: 98%

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Wood - Slotted Drive.

Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Search Rating: 98%

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Wood - Hex Drive - Flanged.

Inserts - Self Tapping - For Wood - Slotted Drive - Short

Search Rating: 98%

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Self Tapping - For Wood - Slotted Drive - Short.

Inserts - Tapered Fit - Finserts - For Wood and Plastics

Search Rating: 98%

Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening is ensured.

The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness. Finserts prevent splintering, splitting and thread pullout.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Tapered Fit - Finserts - For Wood and Plastics.

Assortments

TopShow Pictures

Inserts - Thread Repair - EZ-Lok - Selection Kits

Search Rating: 74%

Also see combined categories:
All EZ Lok inserts and Kits

Contains a selection of E-Z Lok inserts

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Inserts - Thread Repair - EZ-Lok - Selection Kits.

Bungs

TopShow Pictures

Bungs - Round - Threaded

Search Rating: 72%

Round tubing end inserts with a thread


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bungs - Round - Threaded.

Bungs - Square - Threaded

Search Rating: 72%

Square tubing end inserts with a thread


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Bungs - Square - Threaded.

Tools Threading

TopShow Pictures

Tools - Installation - For Self Tapping Inserts

Search Rating: 72%

Also see combined categories:
All Tools

Installation tools for self tapping thread inserts - see the linked inserts categories

Related Information:

Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Installation - For Self Tapping Inserts.

Knobs Ball

TopShow Pictures

Knobs - Ball - Threaded - Recessed Top

Search Rating: 72%

Also see combined categories:
All Female Threaded Ball Knobs

Brass threaded insert. Phenolic.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Ball - Threaded - Recessed Top.

Knobs - Ball - Threaded - Plastic with Knurl

Search Rating: 71%

Also see combined categories:
All Female Threaded Ball Knobs

Brass threaded insert. Knurled circumference to assist with grip.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Ball - Threaded - Plastic with Knurl.

Knobs Mushroom

TopShow Pictures

Knobs - Mushroom Oval - Threaded - Phenolic

Search Rating: 71%

Also see combined categories:
All Mushroom Knobs
All Knobs

Brass threaded insert.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Mushroom Oval - Threaded - Phenolic.

Knobs Ball

TopShow Pictures

Knobs - Ball - Threaded - Thermoplastic

Search Rating: 70%

Also see combined categories:
All Female Threaded Ball Knobs

With moulded plastic threads, or metalic threaded inserts - brass or steel.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Ball - Threaded - Thermoplastic.

Knobs Wing

TopShow Pictures

Knobs - Wing - Female - Phenolic

Search Rating: 70%

Also see combined categories:
All Wing Knobs

Brass threaded insert


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Wing - Female - Phenolic.

Knobs Ball

TopShow Pictures

Knobs - Ball - Threaded - Plastic with Groove

Search Rating: 69%

Also see combined categories:
All Female Threaded Ball Knobs

Black plastic ball knobs with a groove around the circumference. Brass threaded insert.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Ball - Threaded - Plastic with Groove.

Tools Threading

TopShow Pictures

Tools - Taps - High Speed Steel - Helicoil

Search Rating: 68%

Also see combined categories:
All Taps
All Tools

Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Tools - Taps - High Speed Steel - Helicoil.

Knobs Ball

TopShow Pictures

Knobs - Ball - Threaded - Soft Touch

Search Rating: 68%

Also see combined categories:
All Female Threaded Ball Knobs

Rugged thermoplastic construction with a soft feel. Moulded with a soft rubber shell providing a sure grip. Zinc plated steel insert.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Ball - Threaded - Soft Touch.

Knobs - Ball - Threaded - Lateral Grooved

Search Rating: 67%

Also see combined categories:
All Female Threaded Ball Knobs

Moulded platic control ball handles for machine tools, jigs, fixtures etc.

Stylish grooves to assist with grip. Brass threaded insert.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Ball - Threaded - Lateral Grooved.

Knobs Lever

TopShow Pictures

Knobs - Lever

Search Rating: 65%

Also see combined categories:
All Levers
All Knobs

Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Lever.

Knobs Oval

TopShow Pictures

Knobs - Oval Tapered - Press On - Phenolic

Search Rating: 61%

Also see combined categories:
All Knobs

Press on knobs hold on securely without threads or set screws

Shaft diameter should be +0.000 / - 0.076 mm for best performance. Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs. Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Knobs - Oval Tapered - Press On - Phenolic.

Isolators

TopShow Pictures

Mounts - Vibration - Isolation Pads - General Purpose

Search Rating: 44%

Also see combined categories:
All Isolation Pad Mounts

For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.

Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.


Small Parts and Bearings website has a good range of specialty engineering products. Check it now for a possible expanded range of Mounts - Vibration - Isolation Pads - General Purpose.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Air Springs Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Bar Batteries Bearings Acetal Bearings Angular C... Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale Bearings Thrust Bearings and Housi... Bearings for Denta... Bearings for Housings Bearings for Skating Bearings for Wheel... Belts PosiDrive Belts Rounthane Books

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Bottles and Cans Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Cable Ties Cam Followers Cams Carburettor Parts Carousels Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Circlips Clamping Bushings Clamping Rings Clamps Clevis Joints Clips Clutches Collars Collectibles Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Other Couplings Rigid Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Disk Cleaning Machine Drylin Bearings an...

Visa Card Accepted
Visa
Secure Checkout


Dual Eye Joints Dual Vee Bearings Easy Selection Kits Educational Projects Enclosures Engineering and Ho... Eyebolts Fastening Bushings Fishing Reel Parts Flexible Shaft Food Processor Parts Framing Fuel Games Amusement Games General Gas Springs Gear Blanks Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gearheads Inline Gearmotors Basic Gearmotors DC Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur

Master Card Accepted
Mastercard
Secure Checkout


Gears Imperial Worms Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Servo Motors Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings with Inte... Hubs ISOPADS Insulators Isolators Jigsaws Jockey Wheel Thrus... Keys Keys and Keysteel Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Mushroom Knobs Oval Knobs Precision Knobs Round

Pay By
Phone after Checkout
07 3275 2097
International +61 7 3275 2097


Knobs Star Knobs Thumb Knobs Tri Knobs Wing Lanyards Latches Lazy Susans Leadscrews Lifting Chain Lights Linear Slides Locking Compounds Lubricants General... MRI Table Bearings Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Rare Earth Marking Measuring Equipment Measuring Gauges Medical Motors DC Motors Stepper Motors Vibrating Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Nuts Lock ORings

Amex Accepted
Amex
Secure Checkout


ORings for Dental ... Oil Seals Packing Boxes and ... Parts Boxes Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Pins Locating Plungers Ball Plungers Indexing Plungers Spring Positioning Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Grooved Pulleys Idler Pulleys Vee Punches Pushbike Bearings Ratchets and Pawls Robotic Wheels Rod Ends Rollers Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach Screws Countersunk

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sets Shaft Extenders an... Shafting Aluminium Shafting General P... Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Soldering Spacers Special Effects Li... Splined Shafts and... Spring Anchors Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant F... Springs Die Springs Disc Springs Extension Springs General

Visa Card Accepted
Visa
Secure Checkout


Springs Torsion Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stationery Stays Stops Spring Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Swimming Pool Bear... Switches Tape Tee Joints Tension Bushings Tensioners Thread Thread Inserts Threaded Rod Timing Belt Lengths Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Tips Tolerance Rings Tooling Balls

Master Card Accepted
Mastercard
Secure Checkout


Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring Tools General Purpose Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Tube and Tubing Turntables Universal Joints VRings Vacuum Cleaner Belts Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers General Washers Lock Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Miniature Bearings Australia offers 114218 products in 2800 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.