Tensioners Categories

Tensioner - Adjustable Screw

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Uses a screw adjustment for positive precise tensioning.

Idler shaft and pulleys not included with tensioner.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Adjustable Screw on the Small Parts and Bearings website.

Tensioner - Drive - Adjustable Angle

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Fixed base with adjustable arm through 360^o.

Idler shaft and pulleys not included with tensioner.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Drive - Adjustable Angle on the Small Parts and Bearings website.

Tensioner - Drive - Adjustable Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360^o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Drive - Adjustable Flanged on the Small Parts and Bearings website.

Tensioner - Drive - Double Adjust - Base Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Adjusting slot assists with precise adjustments.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360^o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Drive - Double Adjust - Base Mount on the Small Parts and Bearings website.

Tensioner - Drive - Single Adjusting - Shaft Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360^o.

Idler shaft and pulleys not included with tensioner.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Drive - Single Adjusting - Shaft Mount on the Small Parts and Bearings website.

Tensioner - Fixed Angle

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Can be mounted on top of any flat surface to provide horizontal tenaioning.

Idler shaft and pulleys not included with tensioner.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Fixed Angle on the Small Parts and Bearings website.

Tensioner - Fixed Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Compact design allows mounting where space is limited.

Idler shaft and pulleys not included with tensioner.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Fixed Flanged on the Small Parts and Bearings website.

Tensioner - Heavy Duty - Type 2

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted to the side at 90^o and is anchored by set screws.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Heavy Duty - Type 2 on the Small Parts and Bearings website.

Tensioner - Heavy Duty - Type 3

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Shaft is located in the centre of the tensioner between the adjusting slots.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Heavy Duty - Type 3 on the Small Parts and Bearings website.

Tensioner - Heavy Duty - Type 4

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Adjusting slots are parallel to each other.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Heavy Duty - Type 4 on the Small Parts and Bearings website.

Tensioner - Horizontal Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel and is mounted 90^o to the length of the part. Both ends are tapped so the shaft can be threaded on either side of the tensioner.

Idler shaft and pulleys not included with tensioner. Hole is tapped to accept 38.1mm diameter idler shaft (ordered separately).

Related Information:

Idler Shafts

There is also a good range of Tensioner - Horizontal Mount on the Small Parts and Bearings website.

Tensioner - Vertical Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel through the use of the vertical slot. Head is drilled and tapped to accept 38.1mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner.

Related Information:

Idler Shafts

There is also a good range of Tensioner - Vertical Mount on the Small Parts and Bearings website.

You may also be interested in

Studs

Studs - Shoulder - Machine

Machine shoulder studs can be used with idlers or tensioner arms

There is also a good range of Studs - Shoulder - Machine on the Small Parts and Bearings website.

Shafting Precision Ground

Shafts - Idler

Ready made precision ground idler shafts.

Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.

Related Information:

Tensioners

There is also a good range of Shafts - Idler on the Small Parts and Bearings website.

Main Pages

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 125387 products in 2307 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Tensioners Categories

You may also be interested in

Studs

Shafting Precision Ground

Main Pages

Products