Miniature Bearings Australia Pty Ltd

Tensioner Horizontal Mount Categories


Tensioners


Tensioner - Horizontal Mount
Tensioner - Horizontal Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel and is mounted 90o to the length of the part. Both ends are tapped so the shaft can be threaded on either side of the tensioner.

Idler shaft and pulleys not included with tensioner. Hole is tapped to accept 38.1mm diameter idler shaft (ordered separately).

Related Information:
Idler Shafts

There is also a good range of Tensioner - Horizontal Mount on the Small Parts and Bearings website.


Tensioner - Fixed Angle
Tensioner - Fixed Angle

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Can be mounted on top of any flat surface to provide horizontal tenaioning.

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Fixed Angle on the Small Parts and Bearings website.


You may also be interested in

Hooks


Hooks - Horizontal Mounted - 304 Stainless
Hooks - Horizontal Mounted - 304 Stainless

Mirror finish with 20kg Load Capacity. Ideal for corrosive environments.


There is also a good range of Hooks - Horizontal Mounted - 304 Stainless on the Small Parts and Bearings website.


Tensioners


Tensioner - Vertical Mount
Tensioner - Vertical Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel through the use of the vertical slot. Head is drilled and tapped to accept 38.1mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Vertical Mount on the Small Parts and Bearings website.


Tensioner - Drive - Double Adjust - Base Mount
Tensioner - Drive - Double Adjust - Base Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Adjusting slot assists with precise adjustments.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Drive - Double Adjust - Base Mount on the Small Parts and Bearings website.


Tensioner - Drive - Single Adjusting - Shaft Mount
Tensioner - Drive - Single Adjusting - Shaft Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360o.

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Drive - Single Adjusting - Shaft Mount on the Small Parts and Bearings website.


Mounts Machinery


Mounts - Machinery - Industrial - Heavy Duty
Mounts - Machinery - Industrial - Heavy Duty

Also see combined categories:
All Industrial Machine Mounts

High strength machined components. Rapid installation and leveling. 80% vibration reduction. Vertical and horizontal isolation.

For milling mchines, presses, injection molding, packaging machines. Industrial machine mount designed with high strength construction for reduction of both shock and vibration. Prevents vibration from affecting other machines and protects mounted equipment from external vibration effects. Provides precision leveling with large support plate and meets OSHA standards by preventing machinery walking.


There is also a good range of Mounts - Machinery - Industrial - Heavy Duty on the Small Parts and Bearings website.


Mounts - Machinery - Industrial - Medium Duty
Mounts - Machinery - Industrial - Medium Duty

Also see combined categories:
All Industrial Machine Mounts

High strength machined components. Rapid installation and leveling. 80% vibration reduction. Vertical and horizontal isolation.

For milling mchines, presses, injection molding, packaging machines. Industrial machine mount designed with high strength construction for reduction of both shock and vibration. Prevents vibration from affecting other machines and protects mounted equipment from external vibration effects. Provides precision leveling with large support plate and meets OSHA standards by preventing machinery walking.


There is also a good range of Mounts - Machinery - Industrial - Medium Duty on the Small Parts and Bearings website.


Tensioners


Tensioner - Fixed Flanged
Tensioner - Fixed Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Compact design allows mounting where space is limited.

Idler shaft and pulleys not included with tensioner.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Fixed Flanged on the Small Parts and Bearings website.


Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Drive - Adjustable Flanged on the Small Parts and Bearings website.


Mounts Machinery


Mounts - Machinery - Industrial - Pneumatic Elastomeric
Mounts - Machinery - Industrial - Pneumatic Elastomeric

Also see combined categories:
All Industrial Machine Mounts

Well suited for applications requiring high deflection isolation. Vibration can be reduced as much as 90%. High stability horizontal to vertical stiffness ratio 1 to 1.

Heavy wall construction. Significant shock loads are deflected to the outer wall of the mount. Will not bottom out if properly installed. Will continue to support and isolateeven with no air pressure. Leveling is easily accomplished by adding or removing air.


There is also a good range of Mounts - Machinery - Industrial - Pneumatic Elastomeric on the Small Parts and Bearings website.


Tensioners


Tensioner - Heavy Duty - Type 2
Tensioner - Heavy Duty - Type 2

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted to the side at 90o and is anchored by set screws.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Heavy Duty - Type 2 on the Small Parts and Bearings website.


Tensioner - Heavy Duty - Type 3
Tensioner - Heavy Duty - Type 3

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Shaft is located in the centre of the tensioner between the adjusting slots.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Heavy Duty - Type 3 on the Small Parts and Bearings website.


Tensioner - Heavy Duty - Type 4
Tensioner - Heavy Duty - Type 4

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Adjusting slots are parallel to each other.

Related Information:
Idler Shafts

There is also a good range of Tensioner - Heavy Duty - Type 4 on the Small Parts and Bearings website.


Mounts Rectangular


Mounts - Rectangular - 4 Bolt
Mounts - Rectangular - 4 Bolt

Also see combined categories:
All Rectangular Mounts

Rectangular elastomer component bonded with two steel plates.

Low installation height provides good stability. Effectively isolates against horizontal and vertical vibrations. High deflection capacity in horiziontal direction whilst deflection is low in vertical. Oil and grease resistant. Meets OSHA anchoring standards. Ideal use in presses, blowers, pumps, vibrators, rolling mills, crushers etc.


There is also a good range of Mounts - Rectangular - 4 Bolt on the Small Parts and Bearings website.


Isolators


Mounts - Vibration - Isolation Pads - Compression Shear
Mounts - Vibration - Isolation Pads - Compression Shear

Also see combined categories:
All Isolation Pad Mounts

Durable, high quality mount combines effective compression and shear isolation from vibration and shock with the convenience of an internal leveling device.

Deep cavity design allows excellent vibration and shock control in both the vertical and horizontal directions. Heavy duty ductile iron cover and chemically resistant neoprene insert. Internal leveling device levels up to 12.7mm. Specially designed recess on top of cover hosues a rubber washer. Concentric rings on base of neoprene insert prevents walking or creeping. Ideal for lathes, milling machines, punch presses, printing machines, shears, brakes, injection moulding machines, grinders etc. Includes all necessary hardware.


There is also a good range of Mounts - Vibration - Isolation Pads - Compression Shear on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122182 products in 2649 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122182 products in 2649 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.