TAPE CATEGORIES
Tape - Fiberglass - PTFE Coated
Heat Sealer Tape
Non stick ptfe tape is resistant to abrasion, high temperature and chemicals. Commonly used on heatsealing machines, mould protection, packaging, automotive and electrical applications. Temperature range minus 73 oC to 260 oC (-100 to 500 Deg F). Less than 5 percent elongation. This category may be available in the new MBA online store at Tape - Fiberglass - PTFE Coated.
There is also a good range of Tape - Fiberglass - PTFE Coated on the Small Parts and Bearings website.
Bushings - Taperlock
This category may be available in the new MBA online store at Bushings - Taperlock.
There is also a good range of Bushings - Taperlock on the Small Parts and Bearings website.
Bearings - Tapered Roller Set - Single Row - Inch
Common automotive sets include cup and cone
This category may be available in the new MBA online store at Bearings - Tapered Roller Set - Single Row - Inch.
Bearings - Tapered Roller Cone
Replacements for existing tapered roller cones (inner part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.
This category may be available in the new MBA online store at Bearings - Tapered Roller Cone.
There is also a good range of Bearings - Tapered Roller Cone on the Small Parts and Bearings website.
Bearings - Tapered Roller Cup
Replacements for existing tapered roller cups (outer part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.
This category may be available in the new MBA online store at Bearings - Tapered Roller Cup.
There is also a good range of Bearings - Tapered Roller Cup on the Small Parts and Bearings website.
Bearings - Tapered Roller Set - Single Row - Metric
Includes cup and cone
This category may be available in the new MBA online store at Bearings - Tapered Roller Set - Single Row - Metric.
Pins - Taper Imperial - Extractable - External Thread - Stainless Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.
Threaded externally for easy extraction.
Related Information:
There is also a good range of Pins - Taper Imperial - Extractable - External Thread - Stainless Steel on the Small Parts and Bearings website.
Pins - Taper Imperial - Miniature - Carbon Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.
This category may be available in the new MBA online store at Pins - Taper Imperial - Miniature - Carbon Steel.
Related Information:
There is also a good range of Pins - Taper Imperial - Miniature - Carbon Steel on the Small Parts and Bearings website.
Pins - Taper Imperial - Miniature - Stainless Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.
This category may be available in the new MBA online store at Pins - Taper Imperial - Miniature - Stainless Steel.
Related Information:
There is also a good range of Pins - Taper Imperial - Miniature - Stainless Steel on the Small Parts and Bearings website.
Pins - Taper Imperial - Standard - Carbon Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.
This category may be available in the new MBA online store at Pins - Taper Imperial - Standard - Carbon Steel.
Related Information:
There is also a good range of Pins - Taper Imperial - Standard - Carbon Steel on the Small Parts and Bearings website.
Pins - Taper Imperial - Standard - Stainless Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.
This category may be available in the new MBA online store at Pins - Taper Imperial - Standard - Stainless Steel.
Related Information:
There is also a good range of Pins - Taper Imperial - Standard - Stainless Steel on the Small Parts and Bearings website.
Pins - Taper Metric - Carbon Steel
Metric Sizes Tapered 1:50. DIN 1 - A - Ground Ra 0.8um
Metric Sizes to DIN 1. This category may be available in the new MBA online store at Pins - Taper Metric - Carbon Steel.
Related Information:
There is also a good range of Pins - Taper Metric - Carbon Steel on the Small Parts and Bearings website.
Pins - Taper Metric - Extractable - External Thread
Metric Sizes Tapered 1:50 and threaded externally for easy extraction.
DIN 7977. This category may be available in the new MBA online store at Pins - Taper Metric - Extractable - External Thread.
Related Information:
There is also a good range of Pins - Taper Metric - Extractable - External Thread on the Small Parts and Bearings website.
Pins - Taper Metric - Extractable - Internal Thread
Metric Sizes Tapered 1:50 and threaded internally for easy extraction.
DIN 7978. This category may be available in the new MBA online store at Pins - Taper Metric - Extractable - Internal Thread.
Related Information:
There is also a good range of Pins - Taper Metric - Extractable - Internal Thread on the Small Parts and Bearings website.
Pins - Taper Metric - Stainless Steel
Metric Sizes Tapered 1:50. DIN 1 - A - Ground Ra 0.8um
Metric Sizes to DIN 1. This category may be available in the new MBA online store at Pins - Taper Metric - Stainless Steel.
Related Information:
There is also a good range of Pins - Taper Metric - Stainless Steel on the Small Parts and Bearings website.
Inserts - Tapered Fit - Finserts - For Wood and Plastics
Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening is ensured.
The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness. Finserts prevent splintering, splitting and thread pullout. This category may be available in the new MBA online store at Inserts - Tapered Fit - Finserts - For Wood and Plastics.
There is also a good range of Inserts - Tapered Fit - Finserts - For Wood and Plastics on the Small Parts and Bearings website.
Bushings - Integral Taper
Stainless Steel Taper Bushings.
Will not mar shafts. This category may be available in the new MBA online store at Bushings - Integral Taper.
There is also a good range of Bushings - Integral Taper on the Small Parts and Bearings website.
Knobs - Oval Tapered Press On - Phenolic
Also see combined categories:
All Knobs
All Knobs
Press on knobs hold on securely without threads or set screws
Shaft diameter should be +0.000 / - 0.076 mm for best performance. Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs. Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside. This category may be available in the new MBA online store at Knobs - Oval Tapered Press On - Phenolic.
Related Information:
There is also a good range of Knobs - Oval Tapered Press On - Phenolic on the Small Parts and Bearings website.
Bearings - Spherical Roller - Tapered Bore - 21305K to 21322K Series
Use with H300 Series Adaptor Sleeves or AH300 Series Withdrawal Sleeves.
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Spherical Roller - Tapered Bore - 22205K to 22222K Series
Use with H300 Series Adaptor Sleeves or AH300 Series Withdrawal Sleeves.
Related Information:
Bearings - Spherical Roller - Tapered Bore - 22224K to 22264K
Use with H3100 Series Adaptor Sleeves. AH3100 Withdrawal sleeves up to 22234K and AH2200 withdrawal sleeves from 22236K to 22264K
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Spherical Roller - Tapered Bore - 22308K to 22356K Series
Use with H2300 Series Adaptor Sleeves or AH2300 Withdrawal Sleeves
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Spherical Roller - Tapered Bore - 23024K to 230-500K Series
Use with H3000 Series Adaptor Sleeves
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Spherical Roller - Tapered Bore - 23100K to 231-500K Series
Use with H3100 Series Adaptor Sleeves
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Spherical Roller - Tapered Bore - 23218K to 23256K Series
Use with H2300 Series Adaptor Sleeves. AH3200 Withdrawal sleeves up to 23240K and AH2300 withdrawal sleeves from 23244K to 23256K
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Related Information:
Bearings - Spherical Roller - Tapered Bore - 24000K Series
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Bearings - Spherical Roller - Tapered Bore - 24100K Series
Suffix K indicates standard 1 to 12 tapered bore. Suffix K30 indicates special 1 to 30 tapered bore.
Bushings - QD
Used with QD type cast iron vee pulleys, timing pulleys, sprockets, poly vee pulleys and other parts designed specifically for use with a QD bushing
Similar to a taperlock bush, but not interchangeable. QD bushings like taperlock bushings allow for use of a single stock pulley for many applications with different shaft sizes. Select the correct QD series to suit the pulley. This category may be available in the new MBA online store at Bushings - QD.
Related Information:
There is also a good range of Bushings - QD on the Small Parts and Bearings website.
Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
There is also a good range of Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts on the Small Parts and Bearings website.
Bearings - Double Row Ball - Self Aligning - Tapered Bore - Heavy Series
Use with H300 heavy series adaptor sleeves or AH300 Withdrawal sleeves
Related Information:
Bearings - Double Row Ball - Self Aligning - Tapered Bore - Light Series
Use with H200 light series adaptor sleeves or AH200 Withdrawal sleeves
Related Information:
Bungs and Caps - Reversible - Round
Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.
Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges. This category may be available in the new MBA online store at Bungs and Caps - Reversible - Round.
Related Information:
There is also a good range of Bungs and Caps - Reversible - Round on the Small Parts and Bearings website.
Sleeves - Adaptor - H200
For use with tapered bore bearings
Suits 1204K to 1222K tapered bore Self aligning ball bearing. This category may be available in the new MBA online store at Sleeves - Adaptor - H200.
Related Information:
Sleeves - Adaptor - H2300
For use with tapered bore bearings
Suits 2304K to 2322K tapered bore self aligning ball bearing. Suits 23218K to 23256K tapered bore self aligning spherical roller bearings. Suits 22308K to 22356K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Adaptor - H2300.
Related Information:
Sleeves - Adaptor - H3000
For use with tapered bore bearings
Suits 23024K to 230-500K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Adaptor - H3000.
Related Information:
Sleeves - Adaptor - H3100
For use with tapered bore bearings
Suits 23122K to 231-500K tapered bore self aligning spherical roller bearings. Suits 22224K to 22264K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Adaptor - H3100.
Related Information:
Sleeves - Withdrawal - AH3000
For use with tapered bore bearings
Suits 23024K to 230-500K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Withdrawal - AH3000.
Sleeves - Withdrawal - AH3100
For use with tapered bore bearings
Suits 23122K to 231-500K tapered bore self aligning spherical roller bearings. Suits 22222K to 22234K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Withdrawal - AH3100.
Sleeves - Withdrawal - AH3200
For use with tapered bore bearings
Suits 23218K to 23240K tapered bore self aligning spherical roller bearings. Suits 23260K to 232-500K tapered bore self aligning spherical roller bearings. This category may be available in the new MBA online store at Sleeves - Withdrawal - AH3200.
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock
Match with 12.70x7.75mm simplex chain (08B BS)
Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 08B - 1/2 inch. This category may be available in the new MBA online store at Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock.
Related Information:
There is also a good range of Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing 14.000mm Pitch GT - 115mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 14.000mm Pitch GT - 115mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing 14.000mm Pitch GT - 115mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing 14.000mm Pitch GT - 170mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 170mm wide. Taperlock. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 14.000mm Pitch GT - 170mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing 14.000mm Pitch GT - 170mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing 14.000mm Pitch GT - 40mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 40mm wide. Taperlock. Use with GT2 or GT3 type belts.
Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 14.000mm Pitch GT - 40mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing 14.000mm Pitch GT - 40mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing 14.000mm Pitch GT - 55mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 55mm wide. Taperlock. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 14.000mm Pitch GT - 55mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing 14.000mm Pitch GT - 55mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing 14.000mm Pitch GT - 85mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 85mm wide. Taperlock. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 14.000mm Pitch GT - 85mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing 14.000mm Pitch GT - 85mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing 5.000mm Pitch GT - 15mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch GT - 15mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing 5.000mm Pitch GT - 15mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing 5.000mm Pitch GT - 25mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Use with GT2 or GT3 type belts.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size. This category may be available in the new MBA online store at Pulleys - Timing 5.000mm Pitch GT - 25mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing 5.000mm Pitch GT - 25mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Use with GT2 or GT3 type belts.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 12mm Wide - Taperlock on the Small Parts and Bearings website.
Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 20mm wide. Use with GT2 or GT3 type belts.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock.
Related Information:
There is also a good range of Pulleys - Timing 8.000mm Pitch GT - 20mm Wide - Taperlock on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 227672 products in 2186 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
