Miniature Bearings Australia Pty Ltd

Surplus Stock Categories


Clearance Items
Clearance Items


Surplus items and deleted stock lines


There is also a good range of Clearance Items on the Small Parts and Bearings website.


Gears - Spur - Stock - 24DP - Steel
Gears - Spur - Stock - 24DP - Steel

Also see combined categories:
All Imperial Spur Gear Stock

Lengths of spur gear stock for manufacturing gears. DP stands for Diametrical Pitch and is an imperial measurement system.

24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - Stock - 24DP - Steel.

There is also a good range of Gears - Spur - Stock - 24DP - Steel on the Small Parts and Bearings website.


Feeler Gauge Stock - C1095 Carbon Steel
Feeler Gauge Stock - C1095 Carbon Steel


Used for close spacing and extremely tight tolerance situation.

Rc48-62 hardness. High carbon steel. Short flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 inches and can be easily cut to length. 12.7mm wide.

There is also a good range of Feeler Gauge Stock - C1095 Carbon Steel on the Small Parts and Bearings website.


Feeler Gauge Stock - Stainless
Feeler Gauge Stock - Stainless


Used for close spacing and extremely tight tolerance situation.

Rc45-55 hardness. 300 grade stainless. Short flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 inches and can be easily cut to length. 12.7mm wide.

There is also a good range of Feeler Gauge Stock - Stainless on the Small Parts and Bearings website.


Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium
Pulleys - Timing -  2.073mm Pitch - 40DP - STOCK - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.

This category may be available in the new MBA online store at Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium
Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - AT5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT - STOCK - 304 Stainless
Pulleys - Timing -  2.000mm Pitch - GT - STOCK - 304 Stainless

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - STOCK - 304 Stainless.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - STOCK - 304 Stainless on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT - STOCK - Aluminium
Pulleys - Timing -  2.000mm Pitch - GT - STOCK - Aluminium

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 2.000mm Pitch - GT - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - GT - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - GT - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - GT - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel
Pulleys - Timing -  5.000mm Pitch - GT - STOCK - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium
Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 12.700mm Pitch - H - STOCK - Carbon Steel
Pulleys - Timing - 12.700mm Pitch - H - STOCK - Carbon Steel

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 12.700mm Pitch - H - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 12.700mm Pitch - H - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Carbon Steel

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Carbon Steel
Pulleys - Timing -  5.000mm Pitch - HTD - STOCK - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  8.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Carbon Steel
Pulleys - Timing -  8.000mm Pitch - HTD - STOCK - Carbon Steel

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 9.525mm Pitch - L - STOCK - Aluminium
Pulleys - Timing -  9.525mm Pitch - L - STOCK - Aluminium

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 9.525mm Pitch - L - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 9.525mm Pitch - L - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 9.525mm Pitch - L - STOCK - Carbon Steel
Pulleys - Timing -  9.525mm Pitch - L - STOCK - Carbon Steel

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 9.525mm Pitch - L - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 9.525mm Pitch - L - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium
Pulleys - Timing -  2.032mm Pitch - MXL - STOCK - Aluminium

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

2.032mm metric is equivalent to 0.080 pitch imperial. This category may be available in the new MBA online store at Pulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium
Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium
Pulleys - Timing -  2.500mm Pitch - T2.5 - STOCK - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - T5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium
Pulleys - Timing -  5.080mm Pitch - XL - STOCK - Aluminium

Also see combined categories:
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium.

Related Information:

There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel
Pulleys - Timing -  5.080mm Pitch - XL - STOCK - Carbon Steel

Also see combined categories:
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

This category may be available in the new MBA online store at Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel.

Related Information:

There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium
Flanges - Timing Pulley - Suit  1.000mm Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium
Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium
Flanges - Timing Pulley - Suit  9.525mm L Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel
Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 2.000mm GT Series - Aluminium
Flanges - Timing Pulley - Suit  2.000mm GT Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 2.000mm GT Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 2.000mm GT Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium
Flanges - Timing Pulley - Suit  2.500mm T2.5 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm GT Series - Aluminium
Flanges - Timing Pulley - Suit  3.000mm GT Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm GT Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm GT Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm GT Series - Aluminium
Flanges - Timing Pulley - Suit  5.000mm GT Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm GT Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm GT Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  5.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium
Flanges - Timing Pulley - Suit  5.080mm XL Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  8.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel
Flanges - Timing Pulley - Suit  9.525mm L Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel
Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series
Flanges - Timing Pulley - Suit  2.032mm MXL and 40DP Series

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm GT Series - Carbon Steel
Flanges - Timing Pulley - Suit  3.000mm GT Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm GT Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm GT Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm GT Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.000mm GT Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys. Use with GT2 or GT3 type belts.

Use with GT2 or GT3 type belts. This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm GT Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm GT Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm T5 Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.000mm T5 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.000mm T5 Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm T5 Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.080mm XL Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.080mm XL Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 5.080mm XL Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.080mm XL Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  8.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys

This category may be available in the new MBA online store at Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel.

Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212697 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 212697 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.