Miniature Bearings Australia Pty Ltd

Surplus Stock Categories


Clearance Items
Clearance Items


Surplus items and deleted stock lines


There is also a good range of Clearance Items on the Small Parts and Bearings website.


Gears - Spur - Stock - 24DP - Steel
Gears - Spur - Stock - 24DP - Steel

Also see combined categories:
All Imperial Spur Gear Stock

Lengths of spur gear stock for manufacturing gears. DP stands for Diametrical Pitch and is an imperial measurement system.

24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

There is also a good range of Gears - Spur - Stock - 24DP - Steel on the Small Parts and Bearings website.


Feeler Gauge Stock - C1095 Carbon Steel
Feeler Gauge Stock - C1095 Carbon Steel


Used for close spacing and extremely tight tolerance situation.

Rc48-62 hardness. High carbon steel. Short flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 inches and can be easily cut to length. 12.7mm wide.

There is also a good range of Feeler Gauge Stock - C1095 Carbon Steel on the Small Parts and Bearings website.


Feeler Gauge Stock - Stainless
Feeler Gauge Stock - Stainless


Used for close spacing and extremely tight tolerance situation.

Rc45-55 hardness. 300 grade stainless. Short flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 inches and can be easily cut to length. 12.7mm wide.

There is also a good range of Feeler Gauge Stock - Stainless on the Small Parts and Bearings website.


Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium
Pulleys - Timing -  2.073mm Pitch - 40DP - STOCK - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.


Related Information:

There is also a good range of Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium
Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - AT5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock.

Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - 304 Stainless
Pulleys - Timing -  2.000mm Pitch - GT2 - STOCK - 304 Stainless

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - 304 Stainless on the Small Parts and Bearings website.


Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  2.000mm Pitch - GT2 - STOCK - Aluminium

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - GT2 - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - GT2 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT2 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - GT2 - STOCK - Carbon Steel
Pulleys - Timing -  5.000mm Pitch - GT2 - STOCK - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT2 - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium
Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 12.700mm Pitch - H - STOCK - Carbon Steel
Pulleys - Timing - 12.700mm Pitch - H - STOCK - Carbon Steel

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 12.700mm Pitch - H - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Carbon Steel

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Carbon Steel
Pulleys - Timing -  5.000mm Pitch - HTD - STOCK - Carbon Steel

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  8.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Carbon Steel
Pulleys - Timing -  8.000mm Pitch - HTD - STOCK - Carbon Steel

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 9.525mm Pitch - L - STOCK - Aluminium
Pulleys - Timing -  9.525mm Pitch - L - STOCK - Aluminium

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 9.525mm Pitch - L - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 9.525mm Pitch - L - STOCK - Carbon Steel
Pulleys - Timing -  9.525mm Pitch - L - STOCK - Carbon Steel

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 9.525mm Pitch - L - STOCK - Carbon Steel on the Small Parts and Bearings website.


Pulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium
Pulleys - Timing -  2.032mm Pitch - MXL - STOCK - Aluminium

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:

There is also a good range of Pulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium
Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium
Pulleys - Timing -  2.500mm Pitch - T2.5 - STOCK - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - T5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium
Pulleys - Timing -  5.080mm Pitch - XL - STOCK - Aluminium

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium on the Small Parts and Bearings website.


Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel
Pulleys - Timing -  5.080mm Pitch - XL - STOCK - Carbon Steel

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys
All XL 5.08mm Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:

There is also a good range of Pulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel on the Small Parts and Bearings website.


Tool Steel - 496 Oil Hardening - Flat Stock
Tool Steel - 496 Oil Hardening - Flat Stock


General purpose tool steel with good wear resistance, durability and machinability

Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).

There is also a good range of Tool Steel - 496 Oil Hardening - Flat Stock on the Small Parts and Bearings website.


Tools - Pin Vises
Tools - Pin Vises

Also see combined categories:
All Tools

Lengths shown are based on standard stock but may vary.

There is also a good range of Tools - Pin Vises on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium
Flanges - Timing Pulley - Suit  1.000mm Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 1.000mm Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium
Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 12.700mm H Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium
Flanges - Timing Pulley - Suit  9.525mm L Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 9.525mm L Series - Aluminium on the Small Parts and Bearings website.


Tools - Pliers
Tools - Pliers

Also see combined categories:
All Tools

Pliers, multi tool.

Lengths shown are based on standard stock but may vary.

There is also a good range of Tools - Pliers on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel
Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 12.700mm H Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 2.000mm GT2 Series - Aluminium
Flanges - Timing Pulley - Suit  2.000mm GT2 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 2.000mm GT2 Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium
Flanges - Timing Pulley - Suit  2.500mm T2.5 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Aluminium
Flanges - Timing Pulley - Suit  3.000mm GT2 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm GT2 Series - Aluminium
Flanges - Timing Pulley - Suit  5.000mm GT2 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm GT2 Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  5.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm T5 Series - Aluminium
Flanges - Timing Pulley - Suit  5.000mm T5 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm T5 Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium
Flanges - Timing Pulley - Suit  5.080mm XL Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.080mm XL Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  8.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 8.000mm HTD Series - Aluminium on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel
Flanges - Timing Pulley - Suit  9.525mm L Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 9.525mm L Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel
Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 10.000mm T10 Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series
Flanges - Timing Pulley - Suit  2.032mm MXL and 40DP Series

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 2.032mm MXL and 40DP Series on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Carbon Steel
Flanges - Timing Pulley - Suit  3.000mm GT2 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel on the Small Parts and Bearings website.


Flanges - Timing Pulley - Suit 5.000mm GT2 Series - Carbon Steel
Flanges - Timing Pulley - Suit  5.000mm GT2 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:

There is also a good range of Flanges - Timing Pulley - Suit 5.000mm GT2 Series - Carbon Steel on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122209 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122209 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.