STUDS CATEGORIES
Studs - Shoulder - Machine
Machine shoulder studs can be used with idlers or tensioner arms
This category may be available in the new MBA online store at Studs - Shoulder - Machine.
There is also a good range of Studs - Shoulder - Machine on the Small Parts and Bearings website.
Studs - Threaded - Driver
Medium carbon steel with black oxide finish. 125,000 PSI minimum tensile strength. With wrench flats in the centre.
This category may be available in the new MBA online store at Studs - Threaded - Driver.
There is also a good range of Studs - Threaded - Driver on the Small Parts and Bearings website.
Studs - Threaded - Standard
Metric and imperial sizes. Steel and 303 stainless steel.
Yield strength 100,000 PSI. Tensile strength 125,000 PSI. This category may be available in the new MBA online store at Studs - Threaded - Standard.
There is also a good range of Studs - Threaded - Standard on the Small Parts and Bearings website.
You may also be interested in
Castors Stud
Castors - Stud - Threaded - General Purpose - Swivel
This category may be available in the new MBA online store at Castors - Stud - Threaded - General Purpose - Swivel.
There is also a good range of Castors - Stud - Threaded - General Purpose - Swivel on the Small Parts and Bearings website.
Castors - Stud - Twin Wheel - Light Medium Duty
This category may be available in the new MBA online store at Castors - Stud - Twin Wheel - Light Medium Duty.
There is also a good range of Castors - Stud - Twin Wheel - Light Medium Duty on the Small Parts and Bearings website.
Castors - Bolt - Utility
Swivel Castors for light duty applications including wire baskets, display equipment and light trolley applications.
This category may be available in the new MBA online store at Castors - Bolt - Utility.
There is also a good range of Castors - Bolt - Utility on the Small Parts and Bearings website.
Studs - Full Thread - Stainless Steel
18-8 Stainless Steel Allthread Threaded Bar
Short lengths of threaded 18-8 stainless steel bar. This category may be available in the new MBA online store at Studs - Full Thread - Stainless Steel.
There is also a good range of Studs - Full Thread - Stainless Steel on the Small Parts and Bearings website.
Studs - Full Thread - Steel
Low carbon steel allthread threaded bar
Short lengths of threaded low carbon steel bar. This category may be available in the new MBA online store at Studs - Full Thread - Steel.
There is also a good range of Studs - Full Thread - Steel on the Small Parts and Bearings website.
Rollers - Durasoft - Stud Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. This category may be available in the new MBA online store at Rollers - Durasoft - Stud Mount - Black Neoprene.
There is also a good range of Rollers - Durasoft - Stud Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Durasoft - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Stud Mount - Coloured Urethane.
There is also a good range of Rollers - Durasoft - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.
Rollers - Solid - Stud Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings. This category may be available in the new MBA online store at Rollers - Solid - Stud Mount - Black Neoprene.
There is also a good range of Rollers - Solid - Stud Mount - Black Neoprene on the Small Parts and Bearings website.
Rollers - Solid - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings. This category may be available in the new MBA online store at Rollers - Solid - Stud Mount - Coloured Urethane.
There is also a good range of Rollers - Solid - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.
Handles - Adjustable Stud
Adjustable Handles with Stud
Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space. This category may be available in the new MBA online store at Handles - Adjustable Stud.
There is also a good range of Handles - Adjustable Stud on the Small Parts and Bearings website.
Cam Followers - Flanged Stud Type
This category may be available in the new MBA online store at Cam Followers - Flanged Stud Type.
There is also a good range of Cam Followers - Flanged Stud Type on the Small Parts and Bearings website.
Magnets - Cup Assemblies - Stud
This category may be available in the new MBA online store at Magnets - Cup Assemblies - Stud.
There is also a good range of Magnets - Cup Assemblies - Stud on the Small Parts and Bearings website.
Cam Followers - V-Groove Stud Type
This category may be available in the new MBA online store at Cam Followers - V-Groove Stud Type.
There is also a good range of Cam Followers - V-Groove Stud Type on the Small Parts and Bearings website.
Mounts - Pivotal Levellers - With Stud
Tough bonded neoprene. Patented pivotal leveler keeps equipment level and dampens an average 85% of noise. Adjusters.
The mounting nut which holds the stud is molded into the pad in a steel bracket and rotates freely permitting at least 6.35mm of leveling. Includes stud epoxied into the base mount. This category may be available in the new MBA online store at Mounts - Pivotal Levellers - With Stud.
Related Information:
There is also a good range of Mounts - Pivotal Levellers - With Stud on the Small Parts and Bearings website.
Mounts - Pivotal Levellers - Base Without Stud
Tough bonded neoprene. Patented pivotal leveler keeps equipment level and dampens an average 85% of noise. Adjusters.
The mounting nut which holds the stud is molded into the pad in a steel bracket and rotates freely permitting at least 6.35mm of leveling. No stud included so you can use your own custom stud. This category may be available in the new MBA online store at Mounts - Pivotal Levellers - Base Without Stud.
Related Information:
There is also a good range of Mounts - Pivotal Levellers - Base Without Stud on the Small Parts and Bearings website.
Feet - Mounting - Bonded Neoprene - No Stud
Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.
This category may be available in the new MBA online store at Feet - Mounting - Bonded Neoprene - No Stud.
There is also a good range of Feet - Mounting - Bonded Neoprene - No Stud on the Small Parts and Bearings website.
Feet - Mounting - Bonded Neoprene - With Stud
Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.
This category may be available in the new MBA online store at Feet - Mounting - Bonded Neoprene - With Stud.
There is also a good range of Feet - Mounting - Bonded Neoprene - With Stud on the Small Parts and Bearings website.
Cam Followers - Roller Type - Stainless Steel
Stainless steel roller type cam followers.
Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.
Related Information:
There is also a good range of Cam Followers - Roller Type - Stainless Steel on the Small Parts and Bearings website.
Mounts - Levelling Socket - Acme Thread - Gold Chromate
Levelling adjusters. Use acme thread to make a custom stud.
This category may be available in the new MBA online store at Mounts - Levelling Socket - Acme Thread - Gold Chromate.
There is also a good range of Mounts - Levelling Socket - Acme Thread - Gold Chromate on the Small Parts and Bearings website.
Tools - Screw Extractors
The quick and easy way to remove broken screws, bolts, pipes and studs.
Note! You will also need a drill bit of the correct size for each extractor. This category may be available in the new MBA online store at Tools - Screw Extractors.
There is also a good range of Tools - Screw Extractors on the Small Parts and Bearings website.
Shims - Slotted - Imperial Sizes
Precision stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.
This category may be available in the new MBA online store at Shims - Slotted - Imperial Sizes.
There is also a good range of Shims - Slotted - Imperial Sizes on the Small Parts and Bearings website.
Mounts - Buffer - Special Purpose
Vibration dampening
Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F). This category may be available in the new MBA online store at Mounts - Buffer - Special Purpose.
Related Information:
There is also a good range of Mounts - Buffer - Special Purpose on the Small Parts and Bearings website.
Pins - Hammer Drive - Round Head Stainless Steel
Used to replace screws where the need to remove the pin is unlikely.
Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
Related Information:
There is also a good range of Pins - Hammer Drive - Round Head Stainless Steel on the Small Parts and Bearings website.
Tools - Pullers - Dowel Remover and Setter
Designed for removing and setting any pull dowel up to 25.40mm.
Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set. This category may be available in the new MBA online store at Tools - Pullers - Dowel Remover and Setter.
Related Information:
There is also a good range of Tools - Pullers - Dowel Remover and Setter on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - Nylon Seat Female
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated. This category may be available in the new MBA online store at Rod Ends - Steel - Studded - Nylon Seat Female.
There is also a good range of Rod Ends - Steel - Studded - Nylon Seat Female on the Small Parts and Bearings website.
Knobs - Ball Threaded Male - Novo-Grip
Ergonomic Shape for easy gripping
Unique styling for a very distinctive look. Belt fluting for non-slip gripping. Black thermoplastic with steel or stainless steel studs. This category may be available in the new MBA online store at Knobs - Ball Threaded Male - Novo-Grip.
Related Information:
There is also a good range of Knobs - Ball Threaded Male - Novo-Grip on the Small Parts and Bearings website.
Cam Followers - Roller Type - Standard
Carbon steel roller type cam followers.
Load 1 applies when outer race is mounted into a housing with standard bearing fit. Load 2 applies when used as a track roller. Stud designed to fit H7 housing. This category may be available in the new MBA online store at Cam Followers - Roller Type - Standard.
Related Information:
There is also a good range of Cam Followers - Roller Type - Standard on the Small Parts and Bearings website.
Knobs - Round Male - Soft
Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Zinc plated threaded steel stud. This category may be available in the new MBA online store at Knobs - Round Male - Soft.
Related Information:
There is also a good range of Knobs - Round Male - Soft on the Small Parts and Bearings website.
Pins - Hammer Drive - Flat Head
Used to replace screws where the need to remove the pin is unlikely.
Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
Related Information:
There is also a good range of Pins - Hammer Drive - Flat Head on the Small Parts and Bearings website.
Dampers - Double Studded - Silicone
Damps low frequency vibrations. Vibration dampening
Use for compression only. This category may be available in the new MBA online store at Dampers - Double Studded - Silicone.
There is also a good range of Dampers - Double Studded - Silicone on the Small Parts and Bearings website.
Mounts - Levelling Studded - 303 Stainless - Industrial - Nylon Padded
Levelling adjusters. These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery.
303 Stainless Steel. Nylon pad for glide applications.
There is also a good range of Mounts - Levelling Studded - 303 Stainless - Industrial - Nylon Padded on the Small Parts and Bearings website.
Mounts - Levelling Studded - 303 Stainless - Industrial - Rubber Padded
Levelling adjusters. These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery.
303 Stainless Steel. Elastomer pad for non skid applications.
There is also a good range of Mounts - Levelling Studded - 303 Stainless - Industrial - Rubber Padded on the Small Parts and Bearings website.
Mounts - Levelling Studded - 303 Stainless - Standard
Levelling adjusters. Good quality with value pricing. 303 stainless steel.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces. This category may be available in the new MBA online store at Mounts - Levelling Studded - 303 Stainless - Standard.
There is also a good range of Mounts - Levelling Studded - 303 Stainless - Standard on the Small Parts and Bearings website.
Mounts - Levelling Studded - 303 Stainless - Swivel - Acetal Base
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
This category may be available in the new MBA online store at Mounts - Levelling Studded - 303 Stainless - Swivel - Acetal Base.
There is also a good range of Mounts - Levelling Studded - 303 Stainless - Swivel - Acetal Base on the Small Parts and Bearings website.
Mounts - Levelling Studded - 303 Stainless - Swivel - Rubber Padded
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
There is also a good range of Mounts - Levelling Studded - 303 Stainless - Swivel - Rubber Padded on the Small Parts and Bearings website.
Mounts - Levelling Studded - 303 Stainless - Swivel - Standard
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
This category may be available in the new MBA online store at Mounts - Levelling Studded - 303 Stainless - Swivel - Standard.
There is also a good range of Mounts - Levelling Studded - 303 Stainless - Swivel - Standard on the Small Parts and Bearings website.
Mounts - Levelling Studded - 316 Stainless - Swivel - Rubber Padded
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
There is also a good range of Mounts - Levelling Studded - 316 Stainless - Swivel - Rubber Padded on the Small Parts and Bearings website.
Mounts - Levelling Studded - 316 Stainless - Swivel - Standard
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
This category may be available in the new MBA online store at Mounts - Levelling Studded - 316 Stainless - Swivel - Standard.
There is also a good range of Mounts - Levelling Studded - 316 Stainless - Swivel - Standard on the Small Parts and Bearings website.
Mounts - Levelling Studded - Acme Thread - Gold Chromate
Levelling adjusters.
This category may be available in the new MBA online store at Mounts - Levelling Studded - Acme Thread - Gold Chromate.
There is also a good range of Mounts - Levelling Studded - Acme Thread - Gold Chromate on the Small Parts and Bearings website.
Mounts - Levelling Studded - Anti-Vibration
Levelling adjusters. Specifically designed to provide low frequency vibration isolation, leveling and shock attenuation for electronics and machinery.
15o swivel off centre to adjust to uneven surfaces. over 12mm of black neoprene permanently bonded to the base. Neoprene operating temperature -20 to 80 oC. Steel parts are zinc plated with black chromate finish. This category may be available in the new MBA online store at Mounts - Levelling Studded - Anti-Vibration.
There is also a good range of Mounts - Levelling Studded - Anti-Vibration on the Small Parts and Bearings website.
Mounts - Levelling Studded - Black Chromate - Standard
Levelling adjusters. For levelling machine tools, electronic racks, benches etc on uneven surfaces.
Load is distributed over 120o of full radial contact rather than a single radial contact point, providing greater weight distribution between the ball and pad. Zinc plated steel with case hardened ball. This category may be available in the new MBA online store at Mounts - Levelling Studded - Black Chromate - Standard.
There is also a good range of Mounts - Levelling Studded - Black Chromate - Standard on the Small Parts and Bearings website.
Mounts - Levelling Studded - Black Chromate - Swivel - Rubber Padded
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
There is also a good range of Mounts - Levelling Studded - Black Chromate - Swivel - Rubber Padded on the Small Parts and Bearings website.
Mounts - Levelling Studded - Black Chromate - Swivel - Standard
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
This category may be available in the new MBA online store at Mounts - Levelling Studded - Black Chromate - Swivel - Standard.
There is also a good range of Mounts - Levelling Studded - Black Chromate - Swivel - Standard on the Small Parts and Bearings website.
Mounts - Levelling Studded - Clear Chromate - Swivel - Rubber Padded
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
There is also a good range of Mounts - Levelling Studded - Clear Chromate - Swivel - Rubber Padded on the Small Parts and Bearings website.
Mounts - Levelling Studded - Clear Chromate - Swivel - Standard
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
This category may be available in the new MBA online store at Mounts - Levelling Studded - Clear Chromate - Swivel - Standard.
There is also a good range of Mounts - Levelling Studded - Clear Chromate - Swivel - Standard on the Small Parts and Bearings website.
Mounts - Levelling Studded - Economy - Plain Base
Levelling adjusters. Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration.
This category may be available in the new MBA online store at Mounts - Levelling Studded - Economy - Plain Base.
There is also a good range of Mounts - Levelling Studded - Economy - Plain Base on the Small Parts and Bearings website.
Mounts - Levelling Studded - Economy - PVC Padded
Levelling adjusters. Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration.
This category may be available in the new MBA online store at Mounts - Levelling Studded - Economy - PVC Padded.
There is also a good range of Mounts - Levelling Studded - Economy - PVC Padded on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 227672 products in 2187 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
