STUDS CATEGORIES

STUDS CATEGORIES

Studs - Shoulder - Machine

Machine shoulder studs can be used with idlers or tensioner arms

There is also a good range of Studs - Shoulder - Machine on the Small Parts and Bearings website.

Studs - Threaded - Driver

Medium carbon steel with black oxide finish. 125,000 PSI minimum tensile strength. With wrench flats in the centre.

There is also a good range of Studs - Threaded - Driver on the Small Parts and Bearings website.

Studs - Threaded - Standard

Metric and imperial sizes. Steel and 303 stainless steel.

Yield strength 100,000 PSI. Tensile strength 125,000 PSI.

There is also a good range of Studs - Threaded - Standard on the Small Parts and Bearings website.

You may also be interested in

Castors Stud

Castors - Stud - Ball - Light Duty

Also see combined categories:
All Stud Type Castors

There is also a good range of Castors - Stud - Ball - Light Duty on the Small Parts and Bearings website.

Castors - Stud - Friction Ring - General Purpose - Swivel

Also see combined categories:
All Stud Type Castors

There is also a good range of Castors - Stud - Friction Ring - General Purpose - Swivel on the Small Parts and Bearings website.

Castors - Stud - Leveling

Also see combined categories:
All Stud Type Castors

There is also a good range of Castors - Stud - Leveling on the Small Parts and Bearings website.

Castors - Stud - Low Profile - Medium Duty

Also see combined categories:
All Stud Type Castors

There is also a good range of Castors - Stud - Low Profile - Medium Duty on the Small Parts and Bearings website.

Castors - Stud - Threaded - General Purpose - Swivel

Also see combined categories:
All Stud Type Castors

There is also a good range of Castors - Stud - Threaded - General Purpose - Swivel on the Small Parts and Bearings website.

Castors - Stud - Twin Wheel - Light Medium Duty

Also see combined categories:
All Stud Type Castors

There is also a good range of Castors - Stud - Twin Wheel - Light Medium Duty on the Small Parts and Bearings website.

Studs - Full Thread - Stainless Steel

Also see combined categories:
All Studs

18-8 Stainless Steel Allthread Threaded Bar

Short lengths of threaded 18-8 stainless steel bar.

There is also a good range of Studs - Full Thread - Stainless Steel on the Small Parts and Bearings website.

Studs - Full Thread - Steel

Also see combined categories:
All Studs

Low carbon steel allthread threaded bar

Short lengths of threaded low carbon steel bar.

There is also a good range of Studs - Full Thread - Steel on the Small Parts and Bearings website.

Rollers - Durasoft - Stud Mount - Black Neoprene

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.

There is also a good range of Rollers - Durasoft - Stud Mount - Black Neoprene on the Small Parts and Bearings website.

Rollers - Durasoft - Stud Mount - Coloured Urethane

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

There is also a good range of Rollers - Durasoft - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.

Rollers - Solid - Stud Mount - Black Neoprene

Also see combined categories:
All Solid Stud Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.

There is also a good range of Rollers - Solid - Stud Mount - Black Neoprene on the Small Parts and Bearings website.

Rollers - Solid - Stud Mount - Coloured Urethane

Also see combined categories:
All Solid Stud Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.

There is also a good range of Rollers - Solid - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.

Handles - Adjustable - Stud

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.

There is also a good range of Handles - Adjustable - Stud on the Small Parts and Bearings website.

Cam Followers - Flanged Stud Type

Also see combined categories:
All Cam Followers

There is also a good range of Cam Followers - Flanged Stud Type on the Small Parts and Bearings website.

Cam Followers - Plain Stud Type

Also see combined categories:
All Cam Followers

There is also a good range of Cam Followers - Plain Stud Type on the Small Parts and Bearings website.

Rollers - Durasoft - Finned - Stud Mount - Black Neoprene

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

There is also a good range of Rollers - Durasoft - Finned - Stud Mount - Black Neoprene on the Small Parts and Bearings website.

Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

There is also a good range of Rollers - Durasoft - Finned - Stud Mount - Coloured Urethane on the Small Parts and Bearings website.

Magnets - Cup Assemblies - Stud

Also see combined categories:
All Magnets
All Cup Magnets

There is also a good range of Magnets - Cup Assemblies - Stud on the Small Parts and Bearings website.

Cam Followers - V-Groove Stud Type

Also see combined categories:
All Cam Followers

There is also a good range of Cam Followers - V-Groove Stud Type on the Small Parts and Bearings website.

Mounts - Pivotal Levelers - With Stud

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Tough bonded neoprene. Patented pivotal leveler keeps equipment level and dampens an average 85% of noise. Adjusters.

The mounting nut which holds the stud is molded into the pad in a steel bracket and rotates freely permitting at least 6.35mm of leveling. Includes stud epoxied into the base mount.

Related Information:

Cylindrical Bobbin Mounts PDF Quick Guide

There is also a good range of Mounts - Pivotal Levelers - With Stud on the Small Parts and Bearings website.

Mounts - Pivotal Levelers - Base Without Stud

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Tough bonded neoprene. Patented pivotal leveler keeps equipment level and dampens an average 85% of noise. Adjusters.

The mounting nut which holds the stud is molded into the pad in a steel bracket and rotates freely permitting at least 6.35mm of leveling. No stud included so you can use your own custom stud.

Related Information:

Cylindrical Bobbin Mounts PDF Quick Guide

There is also a good range of Mounts - Pivotal Levelers - Base Without Stud on the Small Parts and Bearings website.

Feet - Mounting - Bonded Neoprene - No Stud

Also see combined categories:
All Mounting Feet

Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.

There is also a good range of Feet - Mounting - Bonded Neoprene - No Stud on the Small Parts and Bearings website.

Feet - Mounting - Bonded Neoprene - With Stud

Also see combined categories:
All Mounting Feet

Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.

There is also a good range of Feet - Mounting - Bonded Neoprene - With Stud on the Small Parts and Bearings website.

Mounts - Buffer - Special Purpose

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).

Related Information:

Cylindrical Bobbin Mounts PDF Quick Guide

There is also a good range of Mounts - Buffer - Special Purpose on the Small Parts and Bearings website.

Cam Followers - Roller Type - Stainless Steel

Also see combined categories:
All Cam Followers

Stainless steel roller type cam followers.

Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Related Information:

Technical

There is also a good range of Cam Followers - Roller Type - Stainless Steel on the Small Parts and Bearings website.

Mounts - Leveling - Socket - Acme Thread - Stainless

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. Use acme thread to make a custom stud. 303 Stainless Steel.

There is also a good range of Mounts - Leveling - Socket - Acme Thread - Stainless on the Small Parts and Bearings website.

Mounts - Leveling - Socket - Acme Thread - Gold Chromate

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. Use acme thread to make a custom stud.

There is also a good range of Mounts - Leveling - Socket - Acme Thread - Gold Chromate on the Small Parts and Bearings website.

Tools - Screw Extractors

Also see combined categories:
All Tools

The quick and easy way to remove broken screws, bolts, pipes and studs.

Note! You will also need a drill bit of the correct size for each extractor.

There is also a good range of Tools - Screw Extractors on the Small Parts and Bearings website.

Tools - Pullers - Dowel Remover and Setter

Also see combined categories:
All Tools

Designed for removing and setting any pull dowel up to 25.40mm.

Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set.

Related Information:

Extractable Dowel Pins

Extractable Taper Pins

Dowel Pins Catalogue PDF

There is also a good range of Tools - Pullers - Dowel Remover and Setter on the Small Parts and Bearings website.

Rod Ends - Steel - Studded - Nylon Seat - Female

Also see combined categories:
All Female Rod Ends with Stud

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

There is also a good range of Rod Ends - Steel - Studded - Nylon Seat - Female on the Small Parts and Bearings website.

Cam Followers - Roller Type - Miniature - Standard

Also see combined categories:
All Cam Followers

Small carbon steel roller type cam followers.

Carbon Steel - Nitrile Rubber seals assembled in the outer ring. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Related Information:

Technical

There is also a good range of Cam Followers - Roller Type - Miniature - Standard on the Small Parts and Bearings website.

Knobs - Ball - Novo-Grip - Male

Ergonomic Shape for easy gripping

Unique styling for a very distinctive look. Belt fluting for non-slip gripping. Black thermoplastic with steel or stainless steel studs.

Related Information:

Knobs PDF Quick Guide by Thread Size

There is also a good range of Knobs - Ball - Novo-Grip - Male on the Small Parts and Bearings website.

Shims - Slotted - Imperial Sizes

Also see combined categories:
All Slotted Shim

Precision stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.

There is also a good range of Shims - Slotted - Imperial Sizes on the Small Parts and Bearings website.

Cam Followers - Roller Type - Standard

Also see combined categories:
All Cam Followers

Carbon steel roller type cam followers.

Load 1 applies when outer race is mounted into a housing with standard bearing fit. Load 2 applies when used as a track roller. Stud designed to fit H7 housing.

Related Information:

Technical

There is also a good range of Cam Followers - Roller Type - Standard on the Small Parts and Bearings website.

Mounts - Vibration - Isolation Pads - General Purpose

Also see combined categories:
All Isolation Pad Mounts

For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.

Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.

Related Information:

Cylindrical Bobbin Mounts PDF Quick Guide

There is also a good range of Mounts - Vibration - Isolation Pads - General Purpose on the Small Parts and Bearings website.

Knobs - Round - Male - Soft

Also see combined categories:
All Round Knobs
All Knobs

Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Zinc plated threaded steel stud.

Related Information:

Knobs PDF Quick Guide by Thread Size

There is also a good range of Knobs - Round - Male - Soft on the Small Parts and Bearings website.

Pins - Hammer Drive - Round Head - Stainless Steel

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:

Master Pins Catalogue PDF

There is also a good range of Pins - Hammer Drive - Round Head - Stainless Steel on the Small Parts and Bearings website.

Pins - Hammer Drive - Flat Head

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:

Master Pins Catalogue PDF

There is also a good range of Pins - Hammer Drive - Flat Head on the Small Parts and Bearings website.

Dampers - Double Studded - Silicone

Damps low frequency vibrations. Vibration dampening

Use for compression only.

There is also a good range of Dampers - Double Studded - Silicone on the Small Parts and Bearings website.

Mounts - Leveling - Studded - 303 Stainless

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. Good quality with value pricing. 303 stainless steel.

Large diameter base for added support. 15^o off centre swivel for quick leveling on sloped surfaces.

There is also a good range of Mounts - Leveling - Studded - 303 Stainless on the Small Parts and Bearings website.

Mounts - Leveling - Studded - 303 Stainless - Industrial - Nylon Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery.

303 Stainless Steel. Nylon pad for glide applications.

There is also a good range of Mounts - Leveling - Studded - 303 Stainless - Industrial - Nylon Padded on the Small Parts and Bearings website.

Mounts - Leveling - Studded - 303 Stainless - Industrial - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery.

303 Stainless Steel. Elastomer pad for non skid applications.

There is also a good range of Mounts - Leveling - Studded - 303 Stainless - Industrial - Rubber Padded on the Small Parts and Bearings website.

Mounts - Leveling - Studded - 303 Stainless - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15^o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

There is also a good range of Mounts - Leveling - Studded - 303 Stainless - Swivel on the Small Parts and Bearings website.

Mounts - Leveling - Studded - 303 Stainless - Swivel - Acetal Base

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15^o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

There is also a good range of Mounts - Leveling - Studded - 303 Stainless - Swivel - Acetal Base on the Small Parts and Bearings website.

Mounts - Leveling - Studded - 303 Stainless - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15^o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

There is also a good range of Mounts - Leveling - Studded - 303 Stainless - Swivel - Rubber Padded on the Small Parts and Bearings website.

Mounts - Leveling - Studded - 316 Stainless - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15^o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

There is also a good range of Mounts - Leveling - Studded - 316 Stainless - Swivel on the Small Parts and Bearings website.

Mounts - Leveling - Studded - 316 Stainless - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15^o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

There is also a good range of Mounts - Leveling - Studded - 316 Stainless - Swivel - Rubber Padded on the Small Parts and Bearings website.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 131536 products in 2122 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

You may also be interested in

Castors Stud

Main Pages

Products