Square Shaft Categories
Shafting - Linear - Square
There is also a good range of Shafting - Linear - Square on the Small Parts and Bearings website.
You may also be interested in
Linear Bearings with Housing
Housings - Linear - Square
Used to maintain radial integrity and eliminate the need for parallel shafting.
Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.
There is also a good range of Housings - Linear - Square on the Small Parts and Bearings website.
Square Bar - Brass
Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.
There is also a good range of Square Bar - Brass on the Small Parts and Bearings website.
Square Bar - Urethane
Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.
There is also a good range of Square Bar - Urethane on the Small Parts and Bearings website.
Bearings - Square Groove Profile OD
Special bearings. Not readily available.
There is also a good range of Bearings - Square Groove Profile OD on the Small Parts and Bearings website.
Nuts - Square - Machine Screw
For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards
There is also a good range of Nuts - Square - Machine Screw on the Small Parts and Bearings website.
Sleeves - Square Hole - Plain - Carbon Steel
Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.
There is also a good range of Sleeves - Square Hole - Plain - Carbon Steel on the Small Parts and Bearings website.
Sleeves - Square Hole - Plain - Hardened
Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.
There is also a good range of Sleeves - Square Hole - Plain - Hardened on the Small Parts and Bearings website.
Sleeves - Square Hole - Threaded - Carbon Steel
Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.
There is also a good range of Sleeves - Square Hole - Threaded - Carbon Steel on the Small Parts and Bearings website.
Washers - Square - Heavy Duty - 304 Stainless Steel
There is also a good range of Washers - Square - Heavy Duty - 304 Stainless Steel on the Small Parts and Bearings website.
Washers - Square - Heavy Duty - Steel
There is also a good range of Washers - Square - Heavy Duty - Steel on the Small Parts and Bearings website.
Bungs - Square
Plastic bungs fit inside square tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.
Related Information:
There is also a good range of Bungs - Square on the Small Parts and Bearings website.
Tube - Square - Aluminium
Hollow square tubing for general hobby applications.
Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Includes K&S Metals range and more.
Related Information:
There is also a good range of Tube - Square - Aluminium on the Small Parts and Bearings website.
Tube - Square - Brass
Hollow square tubing for general hobby applications.
Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Includes K&S Metals range and more.
Related Information:
There is also a good range of Tube - Square - Brass on the Small Parts and Bearings website.
Bumpers - Square and Rectangle
With drilled and counterbored holes for mounting. Neoprene only, no steel plate.
There is also a good range of Bumpers - Square and Rectangle on the Small Parts and Bearings website.
Bumpers - Square and Rectangle - Steel Plated - Neoprene
With drilled and counterbored holes for mounting. Neoprene bonded to steel plate.
There is also a good range of Bumpers - Square and Rectangle - Steel Plated - Neoprene on the Small Parts and Bearings website.
Bumpers - Square and Rectangle - Steel Plated - Urethane
With drilled and counterbored holes for mounting. Urethane bonded to steel plate.
There is also a good range of Bumpers - Square and Rectangle - Steel Plated - Urethane on the Small Parts and Bearings website.
Housings - Linear - Square - Clamps
There is also a good range of Housings - Linear - Square - Clamps on the Small Parts and Bearings website.
Keysteel Lengths - Square - Brass
Brass key steel. Square brass bar that can be used for keysteel or for small brass construction projects.
Related Information:
There is also a good range of Keysteel Lengths - Square - Brass on the Small Parts and Bearings website.
Keysteel Lengths - Square - Carbon Steel
Plain carbon steel key steel. Square steel bar that can be used for keysteel or for small construction projects.
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.
Related Information:
There is also a good range of Keysteel Lengths - Square - Carbon Steel on the Small Parts and Bearings website.
Keysteel Lengths - Square - Stainless Steel
303, 304 and 316 grade key steel. Square stainless steel bar that can be used for keysteel or for small construction projects.
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.
Related Information:
There is also a good range of Keysteel Lengths - Square - Stainless Steel on the Small Parts and Bearings website.
Keysteel Lengths - Square - Zinc Plated
Zinc plated carbon steel key steel. Square steel bar that can be used for keysteel or for small construction projects.
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour.
Related Information:
There is also a good range of Keysteel Lengths - Square - Zinc Plated on the Small Parts and Bearings website.
Housings - Bearing - Flanged - Square - Cast Iron
Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.
Related Information:
There is also a good range of Housings - Bearing - Flanged - Square - Cast Iron on the Small Parts and Bearings website.
Leadscrew Nuts - Metric - Square - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
Related Information:
There is also a good range of Leadscrew Nuts - Metric - Square - Metallic on the Small Parts and Bearings website.
Mounts - Bobbin - Male - Square Base
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Fastener may be steel, brass or zinc plated. Natural Rubber isolator.
Related Information:
There is also a good range of Mounts - Bobbin - Male - Square Base on the Small Parts and Bearings website.
Screws - Security - Post Combi Square - Pan Head - Super Zinc
Each 200 pack comes with a Post Combination Driver Bit. Metric only.
Use special tool listed under Screws - Securty - Socket - Tools.
Related Information:
There is also a good range of Screws - Security - Post Combi Square - Pan Head - Super Zinc on the Small Parts and Bearings website.
Screws - Security - Post Combi Square - Tools
Metric only.
Used for two hole security screws.
Related Information:
There is also a good range of Screws - Security - Post Combi Square - Tools on the Small Parts and Bearings website.
Screws - Set - Cup Point - Square Head
Grade 8 hreat treated alloy steel. All screws are threaded to the head.
There is also a good range of Screws - Set - Cup Point - Square Head on the Small Parts and Bearings website.
Screws - Set - Dog Point - Square Head
Grade 8 hreat treated alloy steel. All screws are threaded to the head.
There is also a good range of Screws - Set - Dog Point - Square Head on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Double Wire - Square - 304 Stainless Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Double Wire - Square - 304 Stainless Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel on the Small Parts and Bearings website.
Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel
Also known as snapper pins
Related Information:
There is also a good range of Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel on the Small Parts and Bearings website.
Handles - Tee
Zinc plated steel 7.94mm (5/16in.) square shank.
There is also a good range of Handles - Tee on the Small Parts and Bearings website.
Linear Slide Assemblies - Plain - Low Profile - High Load
High capacity, square gib slides are ideal for precision machine tool applications.
The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.
There is also a good range of Linear Slide Assemblies - Plain - Low Profile - High Load on the Small Parts and Bearings website.
Handles - Latching - Cab Locks
Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.
There is also a good range of Handles - Latching - Cab Locks on the Small Parts and Bearings website.
Handles - Latching - Padlocking
Zinc finished iron/steel construction. Has 5/16in. Square shank.
There is also a good range of Handles - Latching - Padlocking on the Small Parts and Bearings website.
Keys - Machine - Carbon Steel
Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884
Related Information:
There is also a good range of Keys - Machine - Carbon Steel on the Small Parts and Bearings website.
Keys - Machine - Stainless Steel
Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884
Related Information:
There is also a good range of Keys - Machine - Stainless Steel on the Small Parts and Bearings website.
Handles - Latching - T-Handle - Folding
Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.
There is also a good range of Handles - Latching - T-Handle - Folding on the Small Parts and Bearings website.
Handles - Latching - 2-Point Locking Rod Kit
Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.
There is also a good range of Handles - Latching - 2-Point Locking Rod Kit on the Small Parts and Bearings website.
Shafting - Ground - Hobby - Steel
Silversteel shafting for hobbies. Not suitable for precision bearings.
Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.
Related Information:
There is also a good range of Shafting - Ground - Hobby - Steel on the Small Parts and Bearings website.
Shafting - Aluminium - Ceramic Coated
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.
Related Information:
There is also a good range of Shafting - Aluminium - Ceramic Coated on the Small Parts and Bearings website.
Shafting - Aluminium - Ceramic Coated - Tapped
Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.
Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.
Related Information:
There is also a good range of Shafting - Aluminium - Ceramic Coated - Tapped on the Small Parts and Bearings website.
Shafting - Carbon Steel - Keyed
Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.
Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.
There is also a good range of Shafting - Carbon Steel - Keyed on the Small Parts and Bearings website.
Shafting - Ground - Precision - Chrome Plated
Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Case hardened and recommended for use with precision bearings. Ends are not plated.
Case hardened to 60-65 Rockwell C. Chrome plated for corrosion resistance.
There is also a good range of Shafting - Ground - Precision - Chrome Plated on the Small Parts and Bearings website.
Shafting - Ground - Precision - High Carbon Steel
Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - High Carbon Steel on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 303 Grade
Precision ground shafting.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 303 Grade on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 416 Grade Hardened
Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 416 Grade Hardened on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 420 Grade Hardened
Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 420 Grade Hardened on the Small Parts and Bearings website.
Shafting - Ground - Precision - Stainless 440C Grade Hardened
Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.
Related Information:
There is also a good range of Shafting - Ground - Precision - Stainless 440C Grade Hardened on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Contact Us
Charity
Dental Bearings
Distributor Locations
Dowel Pins
Downloadable PDF Catalogue Ball Lock Pins
Downloadable PDF Catalogue Balls
Downloadable PDF Catalogue Ceramic Bearings
Downloadable PDF Catalogue Circlips
Downloadable PDF Catalogue Corrosion Resistant Bearings
Downloadable PDF Catalogue Disc Springs
Downloadable PDF Catalogue Dowel Pins
Downloadable PDF Catalogue Economy Bearings
Downloadable PDF Catalogue Hammer Drive Pins
Downloadable PDF Catalogue High Speed Bearings
Downloadable PDF Catalogue Key Steel
Downloadable PDF Catalogue Knobs
Downloadable PDF Catalogue Leveling Mounts
Downloadable PDF Catalogue Metallic Bushes
Downloadable PDF Catalogue O-Rings
Downloadable PDF Catalogue Pins
Downloadable PDF Catalogue Plastic Bearings
Downloadable PDF Catalogue Polyvee Belts and Pulleys
Downloadable PDF Catalogue Precision Shim Washers
Downloadable PDF Catalogue Push On and Push In Rings
Downloadable PDF Catalogue Rod & Tube
Downloadable PDF Catalogue Roll Pins
Downloadable PDF Catalogue Shaft Collars
Downloadable PDF Catalogue Shim Sheet
Downloadable PDF Catalogue Shoulder Screws
Downloadable PDF Catalogue Sintered Bronze Bushes
Downloadable PDF Catalogue Socket Set Screws
Downloadable PDF Catalogue Solid Bronze Bushes
Downloadable PDF Catalogue Spring Steel Strip
Downloadable PDF Catalogue Springs
Downloadable PDF Catalogue Standard Ball Bearing Range
Downloadable PDF Catalogue Super Precision Bearings
Downloadable PDF Catalogue Taper Pins
Downloadable PDF Catalogue Thrust Bearings
Downloadable PDF Catalogue Thumb Screws and Nuts
Downloadable PDF Catalogue Timing Belts
Downloadable PDF Catalogue Timing Pulley Stock
Downloadable PDF Catalogue Timing Pulleys
Downloadable PDF Catalogue Vibration Mounts
Downloadable PDF Catalogue Washers
Downloadable PDF Catalogue Wave Washers
Downloadable PDF Cross Reference ADR and SKF
Downloadable PDF Cross Reference Anderton Circlips
Downloadable PDF Cross Reference Barden Bearings
Downloadable PDF Cross Reference Essentra
Downloadable PDF Cross Reference Flocast
Downloadable PDF Cross Reference K&S Metals
Downloadable PDF Cross Reference McMaster Carr
Downloadable PDF Cross Reference Miniature Precison Bearings
Downloadable PDF Cross Reference Nordex
Downloadable PDF Cross Reference NSK and NTN
Downloadable PDF Cross Reference Ondrives
Downloadable PDF Cross Reference Reid Supply
Downloadable PDF Cross Reference SDP-SI Designatronics
Downloadable PDF Cross Reference Seeger Circlips
Downloadable PDF Cross Reference Sintered Bronze
Downloadable PDF Cross Reference Small Parts Inc
Downloadable PDF Cross Reference Timing Belts and Pulleys
Freight Rates and Shipping Times
Frequently Asked Questions
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Satellite Reaction Wheels
Shipping Rates and Times
Technical
Terms
5 Axis Machine Tool Bearings
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 128084 products in 2100 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
