Springs Torsion Categories
Springs - Torsion - Left Hand Wound
Free Deflection denotes the angle of the legs in the unloaded starting position
Load should be applied at about half the leg length. This category may be available in the new MBA online store at Springs - Torsion - Left Hand Wound.
Related Information:
There is also a good range of Springs - Torsion - Left Hand Wound on the Small Parts and Bearings website.
Springs - Torsion - Right Hand Wound
Free Deflection denotes the angle of the legs in the unloaded starting position
Load should be applied at about half the leg length. This category may be available in the new MBA online store at Springs - Torsion - Right Hand Wound.
Related Information:
There is also a good range of Springs - Torsion - Right Hand Wound on the Small Parts and Bearings website.
Spring Motor Assemblies - Open - RINO
Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.
Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles. This category may be available in the new MBA online store at Spring Motor Assemblies - Open - RINO.
There is also a good range of Spring Motor Assemblies - Open - RINO on the Small Parts and Bearings website.
Springs - Compression - Conical
Conical 302 Stainless steel springs
Solid height lower than a standard compression spring due to the conical shape. Ends are closed. Starting rate is the same as the kg/mm rate. This category may be available in the new MBA online store at Springs - Compression - Conical.
Related Information:
There is also a good range of Springs - Compression - Conical on the Small Parts and Bearings website.
Springs - Compression - Long Lengths - Music Wire
1 metre and 914mm lengths
Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310. This category may be available in the new MBA online store at Springs - Compression - Long Lengths - Music Wire.
Related Information:
There is also a good range of Springs - Compression - Long Lengths - Music Wire on the Small Parts and Bearings website.
Springs - Compression - Long Lengths - Stainless Steel
1 metre and half metre lengths
Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310. This category may be available in the new MBA online store at Springs - Compression - Long Lengths - Stainless Steel.
Related Information:
There is also a good range of Springs - Compression - Long Lengths - Stainless Steel on the Small Parts and Bearings website.
Springs - Compression - Stainless Steel
This category includes short and long lengths
Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote. This category may be available in the new MBA online store at Springs - Compression - Stainless Steel.
Related Information:
There is also a good range of Springs - Compression - Stainless Steel on the Small Parts and Bearings website.
Springs - Compression - Steel
This category includes short and long lengths
Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote. This category may be available in the new MBA online store at Springs - Compression - Steel.
Related Information:
There is also a good range of Springs - Compression - Steel on the Small Parts and Bearings website.
Springs - Drawbar - Stainless Steel
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring. This category may be available in the new MBA online store at Springs - Drawbar - Stainless Steel.
Related Information:
There is also a good range of Springs - Drawbar - Stainless Steel on the Small Parts and Bearings website.
Springs - Drawbar - Zinc Plated
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring. This category may be available in the new MBA online store at Springs - Drawbar - Zinc Plated.
Related Information:
There is also a good range of Springs - Drawbar - Zinc Plated on the Small Parts and Bearings website.
Springs - Constant Force
301 Stainless Steel
Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum. This category may be available in the new MBA online store at Springs - Constant Force.
Related Information:
There is also a good range of Springs - Constant Force on the Small Parts and Bearings website.
Springs - Die - Imperial - Extra Heavy Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Extra Heavy Duty.
Related Information:
There is also a good range of Springs - Die - Imperial - Extra Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Heavy Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Heavy Duty.
Related Information:
There is also a good range of Springs - Die - Imperial - Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Heavy Duty - Chrome Silicon
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Heavy Duty - Chrome Silicon.
Related Information:
There is also a good range of Springs - Die - Imperial - Heavy Duty - Chrome Silicon on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Medium Duty.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium Duty - Chrome Silicon
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Colour coded blue. Efficient operating range is 25 to 35 percent of the length. Maximum deflection is 50 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Medium Duty - Chrome Silicon.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium Duty - Chrome Silicon on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium-Heavy Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Medium-Heavy Duty.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium-Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Colour coded red. Efficient operating range is 20 to 25 percent of the length. Maximum deflection is 37 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon on the Small Parts and Bearings website.
Springs - Die - Metric - Extra Heavy Duty
Colour coded yellow
High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length. This category may be available in the new MBA online store at Springs - Die - Metric - Extra Heavy Duty.
Related Information:
There is also a good range of Springs - Die - Metric - Extra Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Metric - Heavy Duty
Colour coded red
High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length. This category may be available in the new MBA online store at Springs - Die - Metric - Heavy Duty.
Related Information:
There is also a good range of Springs - Die - Metric - Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Metric - Light Duty
Colour coded green
High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length. This category may be available in the new MBA online store at Springs - Die - Metric - Light Duty.
Related Information:
There is also a good range of Springs - Die - Metric - Light Duty on the Small Parts and Bearings website.
Springs - Die - Metric - Medium Duty
Colour coded blue
High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length. This category may be available in the new MBA online store at Springs - Die - Metric - Medium Duty.
Related Information:
There is also a good range of Springs - Die - Metric - Medium Duty on the Small Parts and Bearings website.
Springs - Extension - Music Wire
Includes long lengths up to 1 metre
Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic. This category may be available in the new MBA online store at Springs - Extension - Music Wire.
Related Information:
There is also a good range of Springs - Extension - Music Wire on the Small Parts and Bearings website.
Springs - Extension - Stainless Steel
Includes long lengths up to 1 metre
Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic. This category may be available in the new MBA online store at Springs - Extension - Stainless Steel.
Related Information:
There is also a good range of Springs - Extension - Stainless Steel on the Small Parts and Bearings website.
Springs - Neoprene
Neoprene elastomer springs have proven to be the safest, most efficient material for punching, stamping and drawing dies.
Major advantages include high loads, increased durability, better performance, no maintenance and long life. This category may be available in the new MBA online store at Springs - Neoprene.
Related Information:
There is also a good range of Springs - Neoprene on the Small Parts and Bearings website.
Springs - Urethane
Urethane springs are designed for use in applications where corrosion, vibration or magnetism prevent the use of conventional steel springs.
They replace steel coil springs in medium pressure applications involving space limitations, high blank holding pressure and adequate stripping. Durometer 95 shore A. Colour black. Tensile strength 5000 psi. Temperature range minus 40 to 80 oC. This category may be available in the new MBA online store at Springs - Urethane.
Related Information:
There is also a good range of Springs - Urethane on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 1
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 1.
There is also a good range of Snaps - Spring - Interlocking - Style 1 on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 2
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 2.
There is also a good range of Snaps - Spring - Interlocking - Style 2 on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 3
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
This category may be available in the new MBA online store at Snaps - Spring - Interlocking - Style 3.
There is also a good range of Snaps - Spring - Interlocking - Style 3 on the Small Parts and Bearings website.
Plungers - Spring - Acetal Handle - Locking - Stainless
White acetal plastic handle . 303 stainless steel body and plunger.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Acetal Handle - Locking - Stainless.
There is also a good range of Plungers - Spring - Acetal Handle - Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Acetal Handle - Locking - Steel
Black acetal plastic handle . Black oxide coated steel body and plunger.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Acetal Handle - Locking - Steel.
There is also a good range of Plungers - Spring - Acetal Handle - Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Acetal Handle - Non Locking - Stainless
White acetal plastic handle . 303 stainless steel body and plunger.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Acetal Handle - Non Locking - Stainless.
There is also a good range of Plungers - Spring - Acetal Handle - Non Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Acetal Handle - Non Locking - Steel
Black acetal plastic handle . Black oxide coated steel body and plunger.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Acetal Handle - Non Locking - Steel.
There is also a good range of Plungers - Spring - Acetal Handle - Non Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Hex Drive Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Hex Drive Handle - Locking - Steel.
There is also a good range of Plungers - Spring - Hex Drive Handle - Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Knurled Handle - Locking - Stainless.
There is also a good range of Plungers - Spring - Knurled Handle - Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal
Steel body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal.
There is also a good range of Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Knurled Handle - Locking - Steel.
There is also a good range of Plungers - Spring - Knurled Handle - Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Locking - Steel-Acetal
Steel body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Knurled Handle - Locking - Steel-Acetal.
There is also a good range of Plungers - Spring - Knurled Handle - Locking - Steel-Acetal on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Non Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Knurled Handle - Non Locking - Stainless.
There is also a good range of Plungers - Spring - Knurled Handle - Non Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Non Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Knurled Handle - Non Locking - Steel.
There is also a good range of Plungers - Spring - Knurled Handle - Non Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - Stainless.
There is also a good range of Plungers - Spring - L Handle - Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Stainless-Acetal
Stainless body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - Stainless-Acetal.
There is also a good range of Plungers - Spring - L Handle - Locking - Stainless-Acetal on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Stainless-Phenolic
Stainless body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - Stainless-Phenolic.
There is also a good range of Plungers - Spring - L Handle - Locking - Stainless-Phenolic on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - Steel.
There is also a good range of Plungers - Spring - L Handle - Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Steel-Acetal
Steel body and acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - Steel-Acetal.
There is also a good range of Plungers - Spring - L Handle - Locking - Steel-Acetal on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Steel-Phenolic
Steel body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Locking - Steel-Phenolic.
There is also a good range of Plungers - Spring - L Handle - Locking - Steel-Phenolic on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Non Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - L Handle - Non Locking - Steel.
There is also a good range of Plungers - Spring - L Handle - Non Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Pull Ring - Locking - Stainless-Acetal
Stainless body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Pull Ring - Locking - Stainless-Acetal.
There is also a good range of Plungers - Spring - Pull Ring - Locking - Stainless-Acetal on the Small Parts and Bearings website.
Plungers - Spring - Pull Ring - Locking - Steel-Acetal
Steel body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Pull Ring - Locking - Steel-Acetal.
There is also a good range of Plungers - Spring - Pull Ring - Locking - Steel-Acetal on the Small Parts and Bearings website.
Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal
Stainless body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread. This category may be available in the new MBA online store at Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal.
There is also a good range of Plungers - Spring - Pull Ring - Non Locking - Stainless-Acetal on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Catalogue
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Charity
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
McMaster Carr Cross Reference PDF
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 209441 products in 2115 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
