Miniature Bearings Australia Pty Ltd

Searched For: Springs Constant Force Categories


Springs Constant Force


Springs - Constant Force
Springs - Constant Force


301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum. This category may be available in the new MBA online store at Springs - Constant Force.

Related Information:

There is also a good range of Springs - Constant Force on the Small Parts and Bearings website.


You may also be interested in

Springs Disc


Washers - Disc Spring - Plastic
Washers - Disc Spring - Plastic

Also see combined categories:
All Disc Springs

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.

There is also a good range of Washers - Disc Spring - Plastic on the Small Parts and Bearings website.


Springs Die


Springs - Die - Imperial - Heavy Duty
Springs - Die - Imperial - Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Heavy Duty.

Related Information:

There is also a good range of Springs - Die - Imperial - Heavy Duty on the Small Parts and Bearings website.


Springs - Die - Imperial - Medium Duty
Springs - Die - Imperial - Medium Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Medium Duty.

Related Information:

There is also a good range of Springs - Die - Imperial - Medium Duty on the Small Parts and Bearings website.


Springs - Die - Imperial - Extra Heavy Duty
Springs - Die - Imperial - Extra Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Extra Heavy Duty.

Related Information:

There is also a good range of Springs - Die - Imperial - Extra Heavy Duty on the Small Parts and Bearings website.


Springs - Die - Imperial - Medium-Heavy Duty
Springs - Die - Imperial - Medium-Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Medium-Heavy Duty.

Related Information:

There is also a good range of Springs - Die - Imperial - Medium-Heavy Duty on the Small Parts and Bearings website.


Gas Springs - Adjustable Force
Gas Springs - Adjustable Force

Also see combined categories:
All Gas Springs

This category may be available in the new MBA online store at Gas Springs - Adjustable Force.

There is also a good range of Gas Springs - Adjustable Force on the Small Parts and Bearings website.


Gas Springs - Fixed Force
Gas Springs - Fixed Force

Also see combined categories:
All Gas Springs

This category may be available in the new MBA online store at Gas Springs - Fixed Force.

There is also a good range of Gas Springs - Fixed Force on the Small Parts and Bearings website.


Plungers - Indexing - Large Handle
Plungers - Indexing - Large Handle

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Extra large fluted handle for quick and easy plunger retraction. Can be fully retracted into the body by pulling up on the handle. Handle is black thermoplastic. Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Large Handle.

There is also a good range of Plungers - Indexing - Large Handle on the Small Parts and Bearings website.


Pins - Pull - Round Handle - Steel
Pins - Pull - Round Handle - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Round Handle - Steel on the Small Parts and Bearings website.


Pins - Pull - Tee Handle - Steel
Pins - Pull - Tee Handle - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Tee Handle - Steel on the Small Parts and Bearings website.


Pins - Pull - Threaded End - Steel
Pins - Pull - Threaded End - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.

Related Information:

There is also a good range of Pins - Pull - Threaded End - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - Steel
Plungers - Indexing - Non Locking - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - Steel.

There is also a good range of Plungers - Indexing - Non Locking - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Precision - Ball Grip
Plungers - Indexing - Precision - Ball Grip

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

This category may be available in the new MBA online store at Plungers - Indexing - Precision - Ball Grip.

There is also a good range of Plungers - Indexing - Precision - Ball Grip on the Small Parts and Bearings website.


Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Round Handle - Stainless Steel on the Small Parts and Bearings website.


Pins - Pull - Tee Handle - Stainless Steel
Pins - Pull - Tee Handle - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Tee Handle - Stainless Steel on the Small Parts and Bearings website.


Pins - Pull - Threaded End - Stainless Steel
Pins - Pull - Threaded End - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.

Related Information:

There is also a good range of Pins - Pull - Threaded End - Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Knob - Steel
Plungers - Indexing - Locking - With Knob - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Knob - Steel.

There is also a good range of Plungers - Indexing - Locking - With Knob - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Shoulder - Steel
Plungers - Indexing - Locking - With Shoulder - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Shoulder - Steel.

There is also a good range of Plungers - Indexing - Locking - With Shoulder - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - Stainless Steel
Plungers - Indexing - Non Locking - Stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - Stainless Steel.

There is also a good range of Plungers - Indexing - Non Locking - Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Precision - Locking - Ball Grip
Plungers - Indexing - Precision - Locking - Ball Grip

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

This category may be available in the new MBA online store at Plungers - Indexing - Precision - Locking - Ball Grip.

There is also a good range of Plungers - Indexing - Precision - Locking - Ball Grip on the Small Parts and Bearings website.


Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Round Handle - Aluminium and Steel on the Small Parts and Bearings website.


Pins - Pull - Tee Handle - Aluminium and Steel
Pins - Pull - Tee Handle - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:

There is also a good range of Pins - Pull - Tee Handle - Aluminium and Steel on the Small Parts and Bearings website.


Pins - Pull - Threaded End - Aluminium and Steel
Pins - Pull - Threaded End - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.

Related Information:

There is also a good range of Pins - Pull - Threaded End - Aluminium and Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Mounting Plate - Steel
Plungers - Indexing - Locking - With Mounting Plate - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Mounting Plate - Steel.

There is also a good range of Plungers - Indexing - Locking - With Mounting Plate - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Plungers - Indexing - Locking - With Shoulder - Stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Shoulder - Stainless Steel.

There is also a good range of Plungers - Indexing - Locking - With Shoulder - Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Knob - Steel
Plungers - Indexing - Non Locking - With Knob - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - With Knob - Steel.

There is also a good range of Plungers - Indexing - Non Locking - With Knob - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - Without Knob - Steel
Plungers - Indexing - Non Locking - Without Knob - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - Without Knob - Steel.

There is also a good range of Plungers - Indexing - Non Locking - Without Knob - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Precision - With Support - Ball Grip
Plungers - Indexing - Precision - With Support - Ball Grip

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

This category may be available in the new MBA online store at Plungers - Indexing - Precision - With Support - Ball Grip.

There is also a good range of Plungers - Indexing - Precision - With Support - Ball Grip on the Small Parts and Bearings website.


Plungers - Indexing - Locking - With Knob - 303 stainless Steel
Plungers - Indexing - Locking - With Knob - 303 stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel. This category may be available in the new MBA online store at Plungers - Indexing - Locking - With Knob - 303 stainless Steel.

There is also a good range of Plungers - Indexing - Locking - With Knob - 303 stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Mounting Plate - Steel
Plungers - Indexing - Non Locking - With Mounting Plate - Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. This category may be available in the new MBA online store at Plungers - Indexing - Non Locking - With Mounting Plate - Steel.

There is also a good range of Plungers - Indexing - Non Locking - With Mounting Plate - Steel on the Small Parts and Bearings website.


Plungers - Indexing - Precision - With Support - Locking - Ball Grip
Plungers - Indexing - Precision - With Support - Locking - Ball Grip

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


There is also a good range of Plungers - Indexing - Precision - With Support - Locking - Ball Grip on the Small Parts and Bearings website.


Plungers - Indexing - Unthreaded - Non Locking - Steel - With Knob
Plungers - Indexing - Unthreaded - Non Locking - Steel - With Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish. This category may be available in the new MBA online store at Plungers - Indexing - Unthreaded - Non Locking - Steel - With Knob.

There is also a good range of Plungers - Indexing - Unthreaded - Non Locking - Steel - With Knob on the Small Parts and Bearings website.


Plungers - Indexing - Unthreaded - Non Locking - Steel - Without Knob
Plungers - Indexing - Unthreaded - Non Locking - Steel - Without Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish.

There is also a good range of Plungers - Indexing - Unthreaded - Non Locking - Steel - Without Knob on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel
Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel.

There is also a good range of Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel
Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel.

There is also a good range of Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob
Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob
Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.

There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob on the Small Parts and Bearings website.


Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob
Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.

There is also a good range of Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob on the Small Parts and Bearings website.


Spring Motor Assemblies - Open - RINO
Spring Motor Assemblies - Open - RINO

Also see combined categories:
All Spring Motors

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles. This category may be available in the new MBA online store at Spring Motor Assemblies - Open - RINO.

There is also a good range of Spring Motor Assemblies - Open - RINO on the Small Parts and Bearings website.


Springs - Compression - Conical
Springs - Compression - Conical

Also see combined categories:
All Conical Springs

Conical 302 Stainless steel springs

Solid height lower than a standard compression spring due to the conical shape. Ends are closed. Starting rate is the same as the kg/mm rate. This category may be available in the new MBA online store at Springs - Compression - Conical.

Related Information:

There is also a good range of Springs - Compression - Conical on the Small Parts and Bearings website.


Springs - Compression - Long Lengths - Music Wire
Springs - Compression - Long Lengths - Music Wire

Also see combined categories:
All Compression Springs

1 metre and 914mm lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310. This category may be available in the new MBA online store at Springs - Compression - Long Lengths - Music Wire.

Related Information:

There is also a good range of Springs - Compression - Long Lengths - Music Wire on the Small Parts and Bearings website.


Springs - Compression - Long Lengths - Stainless Steel
Springs - Compression - Long Lengths - Stainless Steel

Also see combined categories:
All Compression Springs

1 metre and half metre lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310. This category may be available in the new MBA online store at Springs - Compression - Long Lengths - Stainless Steel.

Related Information:

There is also a good range of Springs - Compression - Long Lengths - Stainless Steel on the Small Parts and Bearings website.


Springs - Compression - Music Wire
Springs - Compression - Music Wire

Also see combined categories:
All Compression Springs

This category includes short and long lengths

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote. This category may be available in the new MBA online store at Springs - Compression - Music Wire.

Related Information:

There is also a good range of Springs - Compression - Music Wire on the Small Parts and Bearings website.


Springs - Compression - Stainless Steel
Springs - Compression - Stainless Steel

Also see combined categories:
All Compression Springs

This category includes short and long lengths

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote. This category may be available in the new MBA online store at Springs - Compression - Stainless Steel.

Related Information:

There is also a good range of Springs - Compression - Stainless Steel on the Small Parts and Bearings website.


Springs - Drawbar - Stainless Steel
Springs - Drawbar - Stainless Steel

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring. This category may be available in the new MBA online store at Springs - Drawbar - Stainless Steel.

Related Information:

There is also a good range of Springs - Drawbar - Stainless Steel on the Small Parts and Bearings website.


Springs - Drawbar - Zinc Plated
Springs - Drawbar - Zinc Plated

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring. This category may be available in the new MBA online store at Springs - Drawbar - Zinc Plated.

Related Information:

There is also a good range of Springs - Drawbar - Zinc Plated on the Small Parts and Bearings website.


Springs - Die - Imperial - Heavy Duty - Chrome Silicon
Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Heavy Duty - Chrome Silicon.

Related Information:

There is also a good range of Springs - Die - Imperial - Heavy Duty - Chrome Silicon on the Small Parts and Bearings website.


Springs - Die - Imperial - Medium Duty - Chrome Silicon
Springs - Die - Imperial - Medium Duty - Chrome Silicon

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded blue. Efficient operating range is 25 to 35 percent of the length. Maximum deflection is 50 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Medium Duty - Chrome Silicon.

Related Information:

There is also a good range of Springs - Die - Imperial - Medium Duty - Chrome Silicon on the Small Parts and Bearings website.


Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon
Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded red. Efficient operating range is 20 to 25 percent of the length. Maximum deflection is 37 percent of the length. This category may be available in the new MBA online store at Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon.

Related Information:

There is also a good range of Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 218356 products in 2137 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 218356 products in 2137 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.