Spring Anchors Categories
Anchors - Spring - Stainless Steel
An economical way to secure the ends of extension springs, and provide easy adjustment.
300 Grade Stainless Steel.
There is also a good range of Anchors - Spring - Stainless Steel on the Small Parts and Bearings website.
Anchors - Spring - Steel
An economical way to secure the ends of extension springs, and provide easy adjustment.
C-12114 Steel with Black Oxide Finsh.
There is also a good range of Anchors - Spring - Steel on the Small Parts and Bearings website.
You may also be interested in
Pins Ball Lock
Pins - Ball Lock - Keyring Style - Steel
Economical pins that can be used in military or conventional equipment.
Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Positive lock detent pins. Commercial drill tolerances provide clearance for standard pins. Zinc plated C1144 steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.
Related Information:
There is also a good range of Pins - Ball Lock - Keyring Style - Steel on the Small Parts and Bearings website.
Spring Motor Assemblies - Open - RINO
Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.
Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.
There is also a good range of Spring Motor Assemblies - Open - RINO on the Small Parts and Bearings website.
Springs - Compression - Conical
Conical 302 Stainless steel springs
Solid height lower than a standard compression spring due to the conical shape. Ends are closed. Starting rate is the same as the kg/mm rate.
Related Information:
There is also a good range of Springs - Compression - Conical on the Small Parts and Bearings website.
Springs - Compression - Long Lengths - Music Wire
1 metre and 914mm lengths
Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.
Related Information:
There is also a good range of Springs - Compression - Long Lengths - Music Wire on the Small Parts and Bearings website.
Springs - Compression - Long Lengths - Stainless Steel
1 metre and half metre lengths
Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.
Related Information:
There is also a good range of Springs - Compression - Long Lengths - Stainless Steel on the Small Parts and Bearings website.
Springs - Compression - Stainless Steel
This category includes short and long lengths
Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.
Related Information:
There is also a good range of Springs - Compression - Stainless Steel on the Small Parts and Bearings website.
Springs - Compression - Steel
This category includes short and long lengths
Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.
Related Information:
There is also a good range of Springs - Compression - Steel on the Small Parts and Bearings website.
Springs - Drawbar - Stainless Steel
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.
Related Information:
There is also a good range of Springs - Drawbar - Stainless Steel on the Small Parts and Bearings website.
Springs - Drawbar - Zinc Plated
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.
Related Information:
There is also a good range of Springs - Drawbar - Zinc Plated on the Small Parts and Bearings website.
Springs - Constant Force
301 Stainless Steel
Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.
Related Information:
There is also a good range of Springs - Constant Force on the Small Parts and Bearings website.
Springs - Die - Imperial - Extra Heavy Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Extra Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Heavy Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Heavy Duty - Chrome Silicon
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Heavy Duty - Chrome Silicon on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium Duty - Chrome Silicon
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Colour coded blue. Efficient operating range is 25 to 35 percent of the length. Maximum deflection is 50 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium Duty - Chrome Silicon on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium-Heavy Duty
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium-Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Colour coded red. Efficient operating range is 20 to 25 percent of the length. Maximum deflection is 37 percent of the length.
Related Information:
There is also a good range of Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon on the Small Parts and Bearings website.
Springs - Die - Metric - Extra Heavy Duty
Colour coded yellow
High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.
Related Information:
There is also a good range of Springs - Die - Metric - Extra Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Metric - Heavy Duty
Colour coded red
High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.
Related Information:
There is also a good range of Springs - Die - Metric - Heavy Duty on the Small Parts and Bearings website.
Springs - Die - Metric - Light Duty
Colour coded green
High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.
Related Information:
There is also a good range of Springs - Die - Metric - Light Duty on the Small Parts and Bearings website.
Springs - Die - Metric - Medium Duty
Colour coded blue
High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.
Related Information:
There is also a good range of Springs - Die - Metric - Medium Duty on the Small Parts and Bearings website.
Springs - Extension - Music Wire
Includes long lengths up to 1 metre
Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.
Related Information:
There is also a good range of Springs - Extension - Music Wire on the Small Parts and Bearings website.
Springs - Extension - Stainless Steel
Includes long lengths up to 1 metre
Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.
Related Information:
There is also a good range of Springs - Extension - Stainless Steel on the Small Parts and Bearings website.
Springs - Torsion - Left Hand Wound
Free Deflection denotes the angle of the legs in the unloaded starting position
Load should be applied at about half the leg length.
Related Information:
There is also a good range of Springs - Torsion - Left Hand Wound on the Small Parts and Bearings website.
Springs - Torsion - Right Hand Wound
Free Deflection denotes the angle of the legs in the unloaded starting position
Load should be applied at about half the leg length.
Related Information:
There is also a good range of Springs - Torsion - Right Hand Wound on the Small Parts and Bearings website.
Springs - Air - Convolute Bellows
There is also a good range of Springs - Air - Convolute Bellows on the Small Parts and Bearings website.
Springs - Neoprene
Neoprene elastomer springs have proven to be the safest, most efficient material for punching, stamping and drawing dies.
Major advantages include high loads, increased durability, better performance, no maintenance and long life.
Related Information:
There is also a good range of Springs - Neoprene on the Small Parts and Bearings website.
Springs - Urethane
Urethane springs are designed for use in applications where corrosion, vibration or magnetism prevent the use of conventional steel springs.
They replace steel coil springs in medium pressure applications involving space limitations, high blank holding pressure and adequate stripping. Durometer 95 shore A. Colour black. Tensile strength 5000 psi. Temperature range minus 40 to 80 oC.
Related Information:
There is also a good range of Springs - Urethane on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 1
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
There is also a good range of Snaps - Spring - Interlocking - Style 1 on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 2
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
There is also a good range of Snaps - Spring - Interlocking - Style 2 on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 3
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
There is also a good range of Snaps - Spring - Interlocking - Style 3 on the Small Parts and Bearings website.
Plungers - Spring - Acetal Handle - Locking - Stainless
White acetal plastic handle . 303 stainless steel body and plunger.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Acetal Handle - Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Acetal Handle - Locking - Steel
Black acetal plastic handle . Black oxide coated steel body and plunger.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Acetal Handle - Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Acetal Handle - Non Locking - Stainless
White acetal plastic handle . 303 stainless steel body and plunger.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Acetal Handle - Non Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Acetal Handle - Non Locking - Steel
Black acetal plastic handle . Black oxide coated steel body and plunger.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Acetal Handle - Non Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Hex Drive Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Hex Drive Handle - Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Knurled Handle - Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal
Steel body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Locking - Stainless-Phenolic
Stainless body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Knurled Handle - Locking - Stainless-Phenolic on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Knurled Handle - Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Locking - Steel-Acetal
Steel body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Knurled Handle - Locking - Steel-Acetal on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Non Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Knurled Handle - Non Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - Knurled Handle - Non Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - Knurled Handle - Non Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - L Handle - Locking - Stainless on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Stainless-Acetal
Stainless body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - L Handle - Locking - Stainless-Acetal on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Stainless-Phenolic
Stainless body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - L Handle - Locking - Stainless-Phenolic on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - L Handle - Locking - Steel on the Small Parts and Bearings website.
Plungers - Spring - L Handle - Locking - Steel-Acetal
Steel body and acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
There is also a good range of Plungers - Spring - L Handle - Locking - Steel-Acetal on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Contact Us
Charity
Dental Bearings
Distributor Locations
Dowel Pins
Downloadable PDF Catalogue Ball Lock Pins
Downloadable PDF Catalogue Balls
Downloadable PDF Catalogue Ceramic Bearings
Downloadable PDF Catalogue Circlips
Downloadable PDF Catalogue Clevis Pins
Downloadable PDF Catalogue Corrosion Resistant Bearings
Downloadable PDF Catalogue Disc Springs
Downloadable PDF Catalogue Dowel Pins
Downloadable PDF Catalogue Economy Bearings
Downloadable PDF Catalogue Hammer Drive Pins
Downloadable PDF Catalogue High Speed Bearings
Downloadable PDF Catalogue Key Steel
Downloadable PDF Catalogue Knobs
Downloadable PDF Catalogue Leveling Mounts
Downloadable PDF Catalogue Metallic Bushes
Downloadable PDF Catalogue O-Rings
Downloadable PDF Catalogue Pins
Downloadable PDF Catalogue Plastic Bearings
Downloadable PDF Catalogue Polyvee Belts and Pulleys
Downloadable PDF Catalogue Precision Shim Washers
Downloadable PDF Catalogue Push On and Push In Rings
Downloadable PDF Catalogue Rod & Tube
Downloadable PDF Catalogue Roll Pins
Downloadable PDF Catalogue Shaft Collars
Downloadable PDF Catalogue Shim Sheet
Downloadable PDF Catalogue Shoulder Screws
Downloadable PDF Catalogue Sintered Bronze Bushes
Downloadable PDF Catalogue Snap Rings
Downloadable PDF Catalogue Socket Set Screws
Downloadable PDF Catalogue Solid Bronze Bushes
Downloadable PDF Catalogue Spring Steel Strip
Downloadable PDF Catalogue Springs
Downloadable PDF Catalogue Standard Ball Bearing Range
Downloadable PDF Catalogue Super Precision Bearings
Downloadable PDF Catalogue Taper Pins
Downloadable PDF Catalogue Thrust Bearings
Downloadable PDF Catalogue Thumb Screws and Nuts
Downloadable PDF Catalogue Timing Belts
Downloadable PDF Catalogue Timing Pulley Stock
Downloadable PDF Catalogue Timing Pulleys
Downloadable PDF Catalogue Vibration Mounts
Downloadable PDF Catalogue Washers
Downloadable PDF Catalogue Wave Washers
Downloadable PDF Cross Reference ADR and SKF
Downloadable PDF Cross Reference Anderton Circlips
Downloadable PDF Cross Reference Barden Bearings
Downloadable PDF Cross Reference Essentra
Downloadable PDF Cross Reference Flocast
Downloadable PDF Cross Reference K&S Metals
Downloadable PDF Cross Reference McMaster Carr
Downloadable PDF Cross Reference Miniature Precison Bearings
Downloadable PDF Cross Reference Nordex
Downloadable PDF Cross Reference NSK and NTN
Downloadable PDF Cross Reference Ondrives
Downloadable PDF Cross Reference Reid Supply
Downloadable PDF Cross Reference SDP-SI Designatronics
Downloadable PDF Cross Reference Seeger Circlips
Downloadable PDF Cross Reference Sintered Bronze
Downloadable PDF Cross Reference Small Parts Inc
Downloadable PDF Cross Reference Timing Belts and Pulleys
Freight Rates and Shipping Times
Frequently Asked Questions
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Satellite Reaction Wheels
Shipping Rates and Times
Technical
Terms
5 Axis Machine Tool Bearings
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 130510 products in 2127 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
