Slides Drawer Stainless Front Disconnect Lever 19mm Ext Categories
Linear Slides
Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
There is also a good range of Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext on the Small Parts and Bearings website.
Slides - Drawer - Front Disconnect - Lever - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
There is also a good range of Slides - Drawer - Front Disconnect - Lever - Full Ext on the Small Parts and Bearings website.
Slides - Drawer - Front Disconnect - Latch Lever - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
There is also a good range of Slides - Drawer - Front Disconnect - Latch Lever - Full Ext on the Small Parts and Bearings website.
Slides - Drawer - Front Disconnect - Friction - 19mm Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
There is also a good range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext on the Small Parts and Bearings website.
Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.
There is also a good range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage on the Small Parts and Bearings website.
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
There is also a good range of Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext on the Small Parts and Bearings website.
Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
There is also a good range of Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext on the Small Parts and Bearings website.
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.
There is also a good range of Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext on the Small Parts and Bearings website.
Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.
There is also a good range of Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext on the Small Parts and Bearings website.
Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect.
There is also a good range of Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext on the Small Parts and Bearings website.
Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out - Full Ext
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Lever Disconnect. Non locking. 19.1mm side space.
There is also a good range of Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out - Full Ext on the Small Parts and Bearings website.
Slides - Drawer - Medium Duty - Lever Disconnect
Used for shallow drawers, tool chests and medical carts.
Hold in detent. Full extension. 12.7mm Side Space. Includes 32mm hole pattern as well as traditional hole pattern.
There is also a good range of Slides - Drawer - Medium Duty - Lever Disconnect on the Small Parts and Bearings website.
Slides - Drawer - Heavy Duty - Lever Disconnect - Dual Lock
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Lever Disconnect. Lock in or lock out. 25.4mm over travel. 12.7mm side space.
There is also a good range of Slides - Drawer - Heavy Duty - Lever Disconnect - Dual Lock on the Small Parts and Bearings website.
Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Lever Disconnect. Lock out only. 25.4mm over travel. 12.7mm side space.
There is also a good range of Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out on the Small Parts and Bearings website.
Slides - Drawer - Light Duty - Lever Disconnect
Used for desks, credenzas and cabinets.
Low profile. Hold in detent. Includes 32mm hole pattern as well as traditional hole pattern.
There is also a good range of Slides - Drawer - Light Duty - Lever Disconnect on the Small Parts and Bearings website.
Slides - Drawer - Medium Duty - Non Disconnect - Compact
Used for shallow drawers, tool chests and medical carts.
19.1mm Extension. 9.7mm Side Space.
There is also a good range of Slides - Drawer - Medium Duty - Non Disconnect - Compact on the Small Parts and Bearings website.
Slides - Drawer - Heavy Duty - No Disconnect
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Non disconnect. Hold in detent full extension. 19.1mm side space.
There is also a good range of Slides - Drawer - Heavy Duty - No Disconnect on the Small Parts and Bearings website.
Slides - Drawer - Medium Duty - Easy Disconnect
Used for shallow drawers, tool chests and medical carts.
Rail mounting. Hold in detent. Full extension. 13.5mm Side space. Includes 32mm hole pattern as well as traditional hole pattern.
There is also a good range of Slides - Drawer - Medium Duty - Easy Disconnect on the Small Parts and Bearings website.
Slides - Drawer - Heavy Duty - No Disconnect - Compact
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Non disconnect. 25.4mm over travel. 12.7mm side space.
There is also a good range of Slides - Drawer - Heavy Duty - No Disconnect - Compact on the Small Parts and Bearings website.
Slides - Drawer - Medium Duty - Full Ext
Used for shallow drawers, tool chests and medical carts.
Hold in detent. 12.7mm Side Space.
There is also a good range of Slides - Drawer - Medium Duty - Full Ext on the Small Parts and Bearings website.
Slides - Drawer - Medium Duty - Non-Disconnect
Used for shallow drawers, tool chests and medical carts.
22.4mm over travel. 19.1mm Side Space.
There is also a good range of Slides - Drawer - Medium Duty - Non-Disconnect on the Small Parts and Bearings website.
Linear Slides - Utilitrak - CR - Channels
Use with Utilitrak CR Carriages. Composite heat treated stainless steel mounted to an extruded aluminium base. Match by size.
Related Information:
There is also a good range of Linear Slides - Utilitrak - CR - Channels on the Small Parts and Bearings website.
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.
There is also a good range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel on the Small Parts and Bearings website.
Linear Slides - Utilitrak - CR - Carriage
Use with Utilitrak CR Channel. Stainless steel wheels with sealed bearings. Match by size.
Related Information:
There is also a good range of Linear Slides - Utilitrak - CR - Carriage on the Small Parts and Bearings website.
Slides - Drawer - Extra Heavy Duty
Ideal for computer server stotage, tool boxes, service truck tool drawers and vehicle battery trays. Full extension extra heavy duty slide. 220kg load rating for moderate use, 175kg for frequent use, 130kg for mobile (vehicular) use.
65kg load rating for flat mount applications. Slide space required 19.1mm. Slide includes a silencing bumper for drawer closure. Caution - slide must never be used as a pull-out step, platform or any application supporting human weight.
There is also a good range of Slides - Drawer - Extra Heavy Duty on the Small Parts and Bearings website.
Slides - Linear - Clean Room
Stainless Steel throughout (similar to 440C). Speed: 0.5 m/sec (30 m/min). Temperature: +100oC (Continuous), +140oC (Maximum). Life will be less than normal at +100oC and dimensions may change. Lateral Loading: Dynamic x 1.13 C - Static x 1.19 Co. Precision Linear Slide Unit is a compact linear motion rolling guide for limited stroke length.
There is also a good range of Slides - Linear - Clean Room on the Small Parts and Bearings website.
Latches - Slam Action - Slide
Fast snap in installation. Made from non-corrosive materials, black ABS plastic and stainless steel spring. Push to close latching.
There is also a good range of Latches - Slam Action - Slide on the Small Parts and Bearings website.
Slides - Linear - Non Recirculating Ball - Standard
The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.
Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.
There is also a good range of Slides - Linear - Non Recirculating Ball - Standard on the Small Parts and Bearings website.
Slides - Linear - Recirculating Ball - Standard
The BSR precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.
Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC (Constant), +120oC (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants. Note BSR1530SL and BSR2040SL can not be mounted from inside of track rail.
There is also a good range of Slides - Linear - Recirculating Ball - Standard on the Small Parts and Bearings website.
Slides - Drawer - Heavy Duty - Rail Mounting - Hold In Detent
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Full extension. Includes 32mm hole pattern as well as traditional hole pattern. Designed for units up to 760mm wide.
There is also a good range of Slides - Drawer - Heavy Duty - Rail Mounting - Hold In Detent on the Small Parts and Bearings website.
Rail Systems - Miniature Profile
Ideal for precision applications where mounting space is limited
Gothic arch grooves at raceway contacts enables slide to sustain loads & movement from any direction. Made from stainless steel or plastic for corrosion resistance. End caps have oil holes for easy relubrication.
There is also a good range of Rail Systems - Miniature Profile on the Small Parts and Bearings website.
Slides - Drawer - Medium Duty - Undercarriage Mount
Used for shallow drawers, tool chests and medical carts.
Hold in detent. 21mm over travel.
There is also a good range of Slides - Drawer - Medium Duty - Undercarriage Mount on the Small Parts and Bearings website.
Rod Ends - Steel - Studded - Quick Disconnect - Female
Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.
There is also a good range of Rod Ends - Steel - Studded - Quick Disconnect - Female on the Small Parts and Bearings website.
Springs - Extension - Stainless Steel
Includes long lengths up to 1 metre
Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.
Related Information:
There is also a good range of Springs - Extension - Stainless Steel on the Small Parts and Bearings website.
Circlips - External - Standard - Stainless Steel
Imperial and metric DIN471 / N1400 / D1460. 420 Stainless Steel. Retaining rings. Snap Rings (USA).
420 Stainless Steel.
Related Information:
There is also a good range of Circlips - External - Standard - Stainless Steel on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 1
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
There is also a good range of Snaps - Spring - Interlocking - Style 1 on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 2
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
There is also a good range of Snaps - Spring - Interlocking - Style 2 on the Small Parts and Bearings website.
Snaps - Spring - Interlocking - Style 3
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
There is also a good range of Snaps - Spring - Interlocking - Style 3 on the Small Parts and Bearings website.
Screws - Panel - Stainless
Extra large head. One piece construction. 303 Stainless Steel.
There is also a good range of Screws - Panel - Stainless on the Small Parts and Bearings website.
Washers - Lock - External Tooth - Stainless Steel
Dimensions are nominal and may vary between batches.
There is also a good range of Washers - Lock - External Tooth - Stainless Steel on the Small Parts and Bearings website.
Splined Shafts - Stainless Steel
Externally splined shafting. Bushes not included. Match with same size splined bushes.
Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.
There is also a good range of Splined Shafts - Stainless Steel on the Small Parts and Bearings website.
Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.
Threaded externally for easy extraction.
Related Information:
There is also a good range of Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel on the Small Parts and Bearings website.
Feeler Gauge Stock - Stainless
Used for close spacing and extremely tight tolerance situation.
Rc45-55 hardness. 300 grade stainless. Short flat lengths have rounded ends and are marked for size. Coiled lengths are etched every 6 inches and can be easily cut to length. 12.7mm wide.
There is also a good range of Feeler Gauge Stock - Stainless on the Small Parts and Bearings website.
Nuts - Hexagonal - Stainless Steel
UNC - UNF - BA - METRIC - BSW - Course - Fine - Extra Fine.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
There is also a good range of Nuts - Hexagonal - Stainless Steel on the Small Parts and Bearings website.
Anchors - Spring - Stainless Steel
An economical way to secure the ends of extension springs, and provide easy adjustment.
300 Grade Stainless Steel.
There is also a good range of Anchors - Spring - Stainless Steel on the Small Parts and Bearings website.
Circlips - External - Inverted
N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel. Retaining rings. Snap Rings (USA).
Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance. Less thrust load than standard circlips.
Related Information:
There is also a good range of Circlips - External - Inverted on the Small Parts and Bearings website.
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
There is also a good range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls on the Small Parts and Bearings website.
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
There is also a good range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls on the Small Parts and Bearings website.
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.
Related Information:
There is also a good range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls on the Small Parts and Bearings website.
Bearings - Ball - Textile Industry
Special Design Stainless and Chrome Steel Bearings for the Textile Industry.
Bearings in this category often have special features. Designed for use in textile industry machinery.
Related Information:
There is also a good range of Bearings - Ball - Textile Industry on the Small Parts and Bearings website.
Main Pages
About Us
Balls
Bearings
Brands
Catalogue
Clearance Items
Contact Us
Dental Bearings
Distributor Locations
Frequently Asked Questions
Freight Rates and Shipping Times
Games Clearance
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Ordering
Payment and Shipping
Dowel Pins
Privacy
Product Showcase
Google Search
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 122228 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
