SLEEVES CATEGORIES

Sleeves - Hex Hole - Carbon Steel

Also see combined categories:
All Hex Hole Sleeves

Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.

There is also a good range of Sleeves - Hex Hole - Carbon Steel on the Small Parts and Bearings website.

Sleeves - Hex Hole - Hardened

Also see combined categories:
All Hex Hole Sleeves

Pre hardened to Rockwell 23-30C. Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.

There is also a good range of Sleeves - Hex Hole - Hardened on the Small Parts and Bearings website.

Sleeves - Square Hole - Plain - Carbon Steel

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.

There is also a good range of Sleeves - Square Hole - Plain - Carbon Steel on the Small Parts and Bearings website.

Sleeves - Square Hole - Plain - Hardened

Also see combined categories:
All Square Hole Sleeves

Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.

There is also a good range of Sleeves - Square Hole - Plain - Hardened on the Small Parts and Bearings website.

Sleeves - Square Hole - Threaded - Carbon Steel

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.

There is also a good range of Sleeves - Square Hole - Threaded - Carbon Steel on the Small Parts and Bearings website.

You may also be interested in

Couplings Sleeve

Couplings - Sleeve Type - Hubs

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

Sleeves To Suit Sleeve Type Hubs

Shafting

There is also a good range of Couplings - Sleeve Type - Hubs on the Small Parts and Bearings website.

Couplings - Sleeve Type - Sleeves

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

Hubs to Suit Sleeve Type Couplings

Shafting

There is also a good range of Couplings - Sleeve Type - Sleeves on the Small Parts and Bearings website.

Shaftloc

Shaftloc-tm Sleeves - Single Ended

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Related Information:

Shaftloc-tm- System Explanation

There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.

Cable

Attachments - Cable - Loop Sleeves

Use with synchromesh or standard miniature cable

Related Information:

Synchromesh Info

Cable

There is also a good range of Attachments - Cable - Loop Sleeves on the Small Parts and Bearings website.

Attachments - Cable - Stop Sleeves

Use with synchromesh or standard miniature cable. Use a swaging tool to compress the stop sleeve over the end of the cable.

Related Information:

Cable

There is also a good range of Attachments - Cable - Stop Sleeves on the Small Parts and Bearings website.

Couplings Geargrip

Couplings - Geargrip - Precision - Sleeves Only

Match with hubs from hubs category

Related Information:

Precision Geargrip Hubs

There is also a good range of Couplings - Geargrip - Precision - Sleeves Only on the Small Parts and Bearings website.

Couplings Other

Couplings - Crowned Tooth Gear - Sleeve Only

Match with hubs from the hubs category

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1^o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:

Hubs to Suit

Shafting

There is also a good range of Couplings - Crowned Tooth Gear - Sleeve Only on the Small Parts and Bearings website.

Bearings Needle Roller

Bearings - Needle Roller - Inner Rings

Hardened sleeves for needle roller bearings.

Related Information:

Precision Shafting To Suit Bearings

There is also a good range of Bearings - Needle Roller - Inner Rings on the Small Parts and Bearings website.

Couplings Geargrip

Couplings - Geargrip - Precision - Hubs Only

Match with sleeves from sleeves category

Related Information:

Precision Geargrip Sleeves

There is also a good range of Couplings - Geargrip - Precision - Hubs Only on the Small Parts and Bearings website.

Couplings Other

Couplings - Crowned Tooth Gear - Hubs Only

Match with sleeves from the sleeves category

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1^o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:

Sleeves To Suit

Shafting

There is also a good range of Couplings - Crowned Tooth Gear - Hubs Only on the Small Parts and Bearings website.

Collars

Collars - Shaft - Gripfast - ABS Plastic

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.

Related Information:

Shafting

Rollers - Urethane - Lengths

Also see combined categories:
All Tyred OD Bearings
All Rollers

Low cost alternative for making your own wheels, castors, rollers, sheaves etc. Urethane rod with dual hardness. Harder inner sleeve with softer outside for use as a roller.

Blue outer tyre 90A Durometer bonded to a hard brown 75D Durometer inner sleeve. This results in a hard anti friction bearing surface inside with a soft tyre outside. The roller can be cut and machined to suit your purposes. Testing for your application is recommended.

Related Information:

/store/partslist/rodroundurethane/

There is also a good range of Rollers - Urethane - Lengths on the Small Parts and Bearings website.

Plungers - Ball - Push Fit - 303 Stainless Steel

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded

Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.

There is also a good range of Plungers - Ball - Push Fit - 303 Stainless Steel on the Small Parts and Bearings website.

Plungers - Ball - Push Fit - Plastic Body - Plastic Ball

Also see combined categories:
All Push Fit Ball Plungers

Unthreaded. Plastic body and ball.

There is also a good range of Plungers - Ball - Push Fit - Plastic Body - Plastic Ball on the Small Parts and Bearings website.

Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.

Suitable for use with shaftloc sleeves.

Related Information:

Belts to suit 3.000 Pitch HTD Pulleys - 9mm wide

Double Sided Belts to suit 3.000 Pitch HTD Pulleys - 9mm wide

Timing Pulleys Catalogue PDF

There is also a good range of Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless on the Small Parts and Bearings website.

Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 ^oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

There is also a good range of Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing on the Small Parts and Bearings website.

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

There is also a good range of Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing on the Small Parts and Bearings website.

Inserts - Rivet Nuts - Klik - Threadsert

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Can be used in almost any material over 2.38mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material. Can be pressed or otherwise compressed manually with a hammer for quick installation jobs in sheet material. Tools are available for assembly in blind holes or production assembly. Email us for a price on tools.

There is also a good range of Inserts - Rivet Nuts - Klik - Threadsert on the Small Parts and Bearings website.

Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

There is also a good range of Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing on the Small Parts and Bearings website.

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing

There is also a good range of Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing on the Small Parts and Bearings website.

Main Pages

Distributor Locations

Dowel Pins

Downloadable PDF Catalogue Ball Lock Pins

Downloadable PDF Catalogue Balls

Downloadable PDF Catalogue Ceramic Bearings

Downloadable PDF Catalogue Circlips

Downloadable PDF Catalogue Clevis Pins

Downloadable PDF Catalogue Corrosion Resistant Bearings

Downloadable PDF Catalogue Disc Springs

Downloadable PDF Catalogue Dowel Pins

Downloadable PDF Catalogue Economy Bearings

Downloadable PDF Catalogue Hammer Drive Pins

Downloadable PDF Catalogue High Speed Bearings

Downloadable PDF Catalogue Key Steel

Downloadable PDF Catalogue Knobs

Downloadable PDF Catalogue Leveling Mounts

Downloadable PDF Catalogue Metallic Bushes

Downloadable PDF Catalogue O-Rings

Downloadable PDF Catalogue Pins

Downloadable PDF Catalogue Plastic Bearings

Downloadable PDF Catalogue Polyvee Belts and Pulleys

Downloadable PDF Catalogue Precision Shim Washers

Downloadable PDF Catalogue Push On and Push In Rings

Downloadable PDF Catalogue Rod & Tube

Downloadable PDF Catalogue Roll Pins

Downloadable PDF Catalogue Shaft Collars

Downloadable PDF Catalogue Shim Sheet

Downloadable PDF Catalogue Shoulder Screws

Downloadable PDF Catalogue Sintered Bronze Bushes

Downloadable PDF Catalogue Snap Rings

Downloadable PDF Catalogue Socket Set Screws

Downloadable PDF Catalogue Solid Bronze Bushes

Downloadable PDF Catalogue Spring Steel Strip

Downloadable PDF Catalogue Springs

Downloadable PDF Catalogue Standard Ball Bearing Range

Downloadable PDF Catalogue Super Precision Bearings

Downloadable PDF Catalogue Taper Pins

Downloadable PDF Catalogue Thrust Bearings

Downloadable PDF Catalogue Thumb Screws and Nuts

Downloadable PDF Catalogue Timing Belts

Downloadable PDF Catalogue Timing Pulley Stock

Downloadable PDF Catalogue Timing Pulleys

Downloadable PDF Catalogue Vibration Mounts

Downloadable PDF Catalogue Washers

Downloadable PDF Catalogue Wave Washers

Downloadable PDF Cross Reference ADR and SKF

Downloadable PDF Cross Reference Anderton Circlips

Downloadable PDF Cross Reference Barden Bearings

Downloadable PDF Cross Reference Essentra

Downloadable PDF Cross Reference Flocast

Downloadable PDF Cross Reference K&S Metals

Downloadable PDF Cross Reference McMaster Carr

Downloadable PDF Cross Reference Miniature Precison Bearings

Downloadable PDF Cross Reference Nordex

Downloadable PDF Cross Reference NSK and NTN

Downloadable PDF Cross Reference Ondrives

Downloadable PDF Cross Reference Reid Supply

Downloadable PDF Cross Reference SDP-SI Designatronics

Downloadable PDF Cross Reference Seeger Circlips

Downloadable PDF Cross Reference Sintered Bronze

Downloadable PDF Cross Reference Small Parts Inc

Downloadable PDF Cross Reference Timing Belts and Pulleys

Freight Rates and Shipping Times

Frequently Asked Questions

Satellite Reaction Wheels

Shipping Rates and Times

Technical

Terms

5 Axis Machine Tool Bearings

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 129775 products in 2100 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.