Miniature Bearings Australia Pty Ltd

Size List Popular Bicycle Bottom Bracket Parts Categories


Pushbike Bearings


Size List Popular Bicycle Bottom Bracket Parts
Size List Popular Bicycle Bottom Bracket Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Size List Popular Bicycle Bottom Bracket Parts on the Small Parts and Bearings website.


Size List Popular Bicycle Headset Parts
Size List Popular Bicycle Headset Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Size List Popular Bicycle Headset Parts on the Small Parts and Bearings website.


Size List Popular Bicycle Hub Parts
Size List Popular Bicycle Hub Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Size List Popular Bicycle Hub Parts on the Small Parts and Bearings website.


Size List Fairwheel Bicycle Parts
Size List Fairwheel Bicycle Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Size List Fairwheel Bicycle Parts on the Small Parts and Bearings website.


Size List Mountain Bike Suspension Pivot Parts
Size List Mountain Bike Suspension Pivot Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Size List Mountain Bike Suspension Pivot Parts on the Small Parts and Bearings website.


46-243167P1AD Bracket GE Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of 46-243167P1AD Bracket GE Parts on the Small Parts and Bearings website.


Drylin Linear Assembly Parts - Guide Rails Only
Drylin Linear Assembly Parts - Guide Rails Only

Also see combined categories:
All Drylin Assembly Parts

These rails require a matching carriage as listed in a separate category. Match by size.

Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50um Hardness: 500HV. Matching components listed in separate category.

Related Information:

There is also a good range of Drylin Linear Assembly Parts - Guide Rails Only on the Small Parts and Bearings website.


Drylin Linear Assembly Parts - Carriage Only
Drylin Linear Assembly Parts - Carriage Only

Also see combined categories:
All Drylin Assembly Parts

Linear sliding motion. Plain and Locking Types. These carriages require a matching guide rail or matching rack and pinion. Match by size.

Drylin(R) T linear guides are maintenance free and run without additional lubrication. Consequently, they are also suitable for use in damp or dirty environments. Available with a manually operated clamp to achieve a force fit at any desired point along the travel path. The wing screw is used to clamp the slide in place of the guide. Matching components listed in separate category.

Related Information:

There is also a good range of Drylin Linear Assembly Parts - Carriage Only on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - Helicoil
Tools - Taps - High Speed Steel - Helicoil

Also see combined categories:
All Taps
All Tools

Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.


There is also a good range of Tools - Taps - High Speed Steel - Helicoil on the Small Parts and Bearings website.


Motors - DC 26.9X24.2X18.3 mm
Motors - DC 26.9X24.2X18.3 mm

Also see combined categories:
All DC Motors

MF-26 Series - 1.5 to 24 VDC - 3600 to 15900 RPM. Standard 130 Size Hobby Motor.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:

There is also a good range of Motors - DC 26.9X24.2X18.3 mm on the Small Parts and Bearings website.


Bearings - Self Clinching - Self Aligning - Delrin -tm-
Bearings - Self Clinching - Self Aligning - Delrin -tm-

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in a special steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

There is also a good range of Bearings - Self Clinching - Self Aligning - Delrin -tm- on the Small Parts and Bearings website.


Bearings - Self Clinching - Self Aligning - Needle Roller
Bearings - Self Clinching - Self Aligning - Needle Roller

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

There is also a good range of Bearings - Self Clinching - Self Aligning - Needle Roller on the Small Parts and Bearings website.


Tools - Sets - Foldup
Tools - Sets - Foldup

Also see combined categories:
All Tools

Handy sets of popular sized hex and torx wrenches.

Highest quality 8650 chrome nickel alloy heat treated and finished to resist rust. Ergo style has colour coded handles. Classic style has one piece steel grip handle. Conveniently folds up like a jack knife when not in use.

There is also a good range of Tools - Sets - Foldup on the Small Parts and Bearings website.


Joints - Ball Positioner
Joints - Ball Positioner


For holding parts at an angle up to 45 degrees

Pivots 45 Deg from horizontal in every direction. Tightens at any position by rotating the collar. Has a tapped hole at the top and a male thread at the bottom for securing.

There is also a good range of Joints - Ball Positioner on the Small Parts and Bearings website.


Bearings - Self Clinching - Self Aligning - Sintered Bronze
Bearings - Self Clinching - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

There is also a good range of Bearings - Self Clinching - Self Aligning - Sintered Bronze on the Small Parts and Bearings website.


Pins - Clevis - Zinc Plated
Pins - Clevis - Zinc Plated

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Made from low carbon steel.

Related Information:

There is also a good range of Pins - Clevis - Zinc Plated on the Small Parts and Bearings website.


Check Size Before Ordering BB30 Parts
Check Size Before Ordering BB30 Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering BB30 Parts on the Small Parts and Bearings website.


Check Size Before Ordering FSA Parts
Check Size Before Ordering FSA Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering FSA Parts on the Small Parts and Bearings website.


Check Size Before Ordering ISIS Parts
Check Size Before Ordering ISIS Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering ISIS Parts on the Small Parts and Bearings website.


Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-
Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in a special stainless steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Related Information:

There is also a good range of Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm- on the Small Parts and Bearings website.


Check Size Before Ordering BMX MID Parts
Check Size Before Ordering BMX MID Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering BMX MID Parts on the Small Parts and Bearings website.


Check Size Before Ordering Canondale Lefty Parts
Check Size Before Ordering Canondale Lefty Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering Canondale Lefty Parts on the Small Parts and Bearings website.


Check Size Before Ordering Specialized Roubaix Parts
Check Size Before Ordering Specialized Roubaix Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering Specialized Roubaix Parts on the Small Parts and Bearings website.


Check Size Before Ordering Sram Truvativ Parts
Check Size Before Ordering Sram Truvativ Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering Sram Truvativ Parts on the Small Parts and Bearings website.


Check Size Before Ordering DT Swiss Hubs Parts
Check Size Before Ordering DT Swiss Hubs Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering DT Swiss Hubs Parts on the Small Parts and Bearings website.


Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts
Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts on the Small Parts and Bearings website.


Check Size Before Ordering Shimano External BB Pre 2006 Parts
Check Size Before Ordering Shimano External BB Pre 2006 Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

There is also a good range of Check Size Before Ordering Shimano External BB Pre 2006 Parts on the Small Parts and Bearings website.


Linear Guide System - Low Profile - Size 17
Linear Guide System - Low Profile - Size 17

Also see combined categories:
All Linear Slides

Carriage Assembly and Rails sold separately. Listed in the same category.

Low-Load applications. Max load 50N. Self Lubricating. Corrosion Resistant. Low Friction. Max Speed 15 m/s. Operating Temp -40o to 90o Celius.

There is also a good range of Linear Guide System - Low Profile - Size 17 on the Small Parts and Bearings website.


Rod - Round - Nylon
Rod - Round - Nylon

Also see combined categories:
All Plastic Rod

High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.13 g/cm3 - Operating Temp -40 to 160 C. Tensile Strength 78 Mpa / Hardness 82 Rockwell M. Co-efficient of friction 0.20-0.30. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

There is also a good range of Rod - Round - Nylon on the Small Parts and Bearings website.


Rod - Round - Polyester PETP
Rod - Round - Polyester PETP

Also see combined categories:
All Plastic Rod

High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.39 g/cm3 - Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 90 Mpa. Hardness 96 Rockwell M. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

There is also a good range of Rod - Round - Polyester PETP on the Small Parts and Bearings website.


Shim and Foil - Aluminium
Shim and Foil - Aluminium

Also see combined categories:
All Shim
All Sheet

Precision aluminium shim sheet. Includes listing on 6061-T6 Aluminium Sheet. Very thin to thick sizes.

NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Coloured shim is anodised. The colour is not removable. The colour is for identification purposes only.

There is also a good range of Shim and Foil - Aluminium on the Small Parts and Bearings website.


Rod - Round - PTFE
Rod - Round - PTFE

Also see combined categories:
All Plastic Rod

Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:

There is also a good range of Rod - Round - PTFE on the Small Parts and Bearings website.


Screws - Low Head - Socket
Screws - Low Head - Socket

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Note. Hex key size may. The size listed is the usual and minimum size.

Related Information:

There is also a good range of Screws - Low Head - Socket on the Small Parts and Bearings website.


Tube - Round - Bronze - LG2 Standard
Tube - Round - Bronze - LG2 Standard

Also see combined categories:
All Metal Tube

Leaded Gunmetal Bronze tubing. Product will machine to the sizes listed and is supplied will be larger on OD and smaller on bore.

Sizes listed are FINISHED SIZE. Product supplied will be larger on OD and smaller on bore. Longer lengths available on special request. Composition (Approx.) : Copper 85%, Tin 5%, Zinc 5%, Lead 5%. AS1565-83600 / Hardness : 70-90 BHN. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

There is also a good range of Tube - Round - Bronze - LG2 Standard on the Small Parts and Bearings website.


Clutches - Slip - Magnetic Particle - No Power
Clutches - Slip - Magnetic Particle - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:

There is also a good range of Clutches - Slip - Magnetic Particle - No Power on the Small Parts and Bearings website.


Suction Cups
Suction Cups


EPDM or Natural Rubber as listed against each item

EPDM is a higher grade rubber that rates excellent for ozone resistance and is used for molded parts used outdoors. SBR is Styrene-butadiene Rubber is a general purpose rubber but not recommended for continual use outdoors or in oily environments.

There is also a good range of Suction Cups on the Small Parts and Bearings website.


Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:

There is also a good range of Clutches - Slip - Magnetic Particle - Integral Shaft - No Power on the Small Parts and Bearings website.


Tube - Round - Sintered Bronze
Tube - Round - Sintered Bronze

Also see combined categories:
All Metal Tube - Round

Oil impregnated sintered bronze tubing - self lubricating. Product will machine to the sizes listed and is supplied will be larger on OD and smaller on bore.

Sizes listed are FINISHED SIZE. Product supplied will be larger on OD and smaller on ID to allow for machining. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.

Related Information:

There is also a good range of Tube - Round - Sintered Bronze on the Small Parts and Bearings website.


Spring Assemblies - Small Bracket - RINO
Spring Assemblies - Small Bracket - RINO


Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Related Information:

There is also a good range of Spring Assemblies - Small Bracket - RINO on the Small Parts and Bearings website.


Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic
Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic


Load and speed capability depend on the bearing used. Use with steel bearing inserts for plastic housings.

Related Information:

There is also a good range of Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic on the Small Parts and Bearings website.


Belts - Timing - 1.500mm Pitch - TN15 Bando - 15mm Wide
Belts - Timing -  1.500mm Pitch - TN15 Bando - 15mm Wide

Also see combined categories:
All 1.5mm Pitch Timing Belts

TN15 Series Bando Timing Belts - Limited Range. Enquire for sizes not listed.

Pitch (P) - 1.500mm. Overall Height (H1) - 1.3mm. Tooth Height (H2) - 0.7mm. Belt working load should be rated at approximately 1/15th of their ultimate breaking strength.

Related Information:

There is also a good range of Belts - Timing - 1.500mm Pitch - TN15 Bando - 15mm Wide on the Small Parts and Bearings website.


Dual Vee - Guide Wheels - Studded
Dual Vee - Guide Wheels - Studded

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels.

Match with correct Track Size. Note! OD is reference only. Allow up to 1.2 mm larger than listed.

Related Information:

There is also a good range of Dual Vee - Guide Wheels - Studded on the Small Parts and Bearings website.


Tie Downs - D-Ring - Forged with Bolt-on Bracket
Tie Downs - D-Ring - Forged with Bolt-on Bracket

Also see combined categories:
All D Ring Tie Downs

C-1045 steel with bolt-on mounting bracket


There is also a good range of Tie Downs - D-Ring - Forged with Bolt-on Bracket on the Small Parts and Bearings website.


Tie Downs - D-Ring - Forged with Weld-on Bracket
Tie Downs - D-Ring - Forged with Weld-on Bracket

Also see combined categories:
All D Ring Tie Downs

C-1045 steel with weld-on mounting bracket


There is also a good range of Tie Downs - D-Ring - Forged with Weld-on Bracket on the Small Parts and Bearings website.


Catalogues
Catalogues


Hardcopy, CD and PDF catalogues. Including the popular Machinery Handbook.

Information to assist in the selection of our products.

Related Information:

There is also a good range of Catalogues on the Small Parts and Bearings website.


Washers - Self Aligning - Sets - Stainless Steel
Washers - Self Aligning - Sets - Stainless Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

There is also a good range of Washers - Self Aligning - Sets - Stainless Steel on the Small Parts and Bearings website.


Bearings - Acetal - Special Purpose
Bearings - Acetal - Special Purpose


Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems


There is also a good range of Bearings - Acetal - Special Purpose on the Small Parts and Bearings website.


Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

There is also a good range of Rod - Round - Aluminium on the Small Parts and Bearings website.


Rod - Round - Brass
Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

There is also a good range of Rod - Round - Brass on the Small Parts and Bearings website.


Latches - Draw - T-Handle - Stainless Steel
Latches - Draw - T-Handle - Stainless Steel


Black rubber T Handle with stainless steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.


There is also a good range of Latches - Draw - T-Handle - Stainless Steel on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122229 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122229 products in 2652 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.