Miniature Bearings Australia Pty Ltd

SETS CATEGORIES


Tools - Sets
Tools - Sets

Also see combined categories:
All Tools

General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.


There is also a good range of Tools - Sets on the Small Parts and Bearings website.


Tools - Sets - Foldup
Tools - Sets - Foldup

Also see combined categories:
All Tools

Handy sets of popular sized hex and torx wrenches.

Highest quality 8650 chrome nickel alloy heat treated and finished to resist rust. Ergo style has colour coded handles. Classic style has one piece steel grip handle. Conveniently folds up like a jack knife when not in use.

There is also a good range of Tools - Sets - Foldup on the Small Parts and Bearings website.


Inserts - Thread Repair - Recoil Starter Sets
Inserts - Thread Repair - Recoil Starter Sets

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.

Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

There is also a good range of Inserts - Thread Repair - Recoil Starter Sets on the Small Parts and Bearings website.


Inserts - Thread Repair - Helicoil Starter Sets
Inserts - Thread Repair - Helicoil Starter Sets

Also see combined categories:
All Helicoil Inserts and Kits

Helicoil sets include 3 lengths of 1x, 1.5x and 2x the thread diameter. Also included is a tap, an installation tool, a drill and a tang removal tool packed in a sturdy plastic case.

Stainless inserts. Full instructions included. Helicoil kits include a prewinder tool for fine threads or a threaded mandrel for course and metric threads. Metric and Imperial available.

There is also a good range of Inserts - Thread Repair - Helicoil Starter Sets on the Small Parts and Bearings website.


Inserts - Thread Repair - Keylocking Starter Sets
Inserts - Thread Repair - Keylocking Starter Sets

Also see combined categories:
All Keylocking Inserts and Kits

Keylocking inserts are used to repair threads by tapping the worn thread to a standard larger thread, twisting the insert into place and then driving in the keys to lock the insert. Also known as keenserts.

Each kit contains an installation tool and the quantity of inserts shown. One size per kit. Also known as keenserts, keylocking inserts are available in mild steel and stainless steel. Installation is by drilling out the old thread, countersinking, tapping new thread with a standard tap, screwing the insert until slightly below the surface, then tapping down the keys using the tool supplied and a hammer.

Related Information:

There is also a good range of Inserts - Thread Repair - Keylocking Starter Sets on the Small Parts and Bearings website.


Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

There is also a good range of Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets on the Small Parts and Bearings website.


Socket Set Screws - Acetal Tipped - Alloy Steel
Socket Set Screws - Acetal Tipped - Alloy Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.


Related Information:

There is also a good range of Socket Set Screws - Acetal Tipped - Alloy Steel on the Small Parts and Bearings website.


Socket Set Screws - Acetal Tipped - Stainless Steel
Socket Set Screws - Acetal Tipped - Stainless Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.


Related Information:

There is also a good range of Socket Set Screws - Acetal Tipped - Stainless Steel on the Small Parts and Bearings website.


Socket Set Screws - Brass Tipped - Alloy Steel
Socket Set Screws - Brass Tipped - Alloy Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.


Related Information:

There is also a good range of Socket Set Screws - Brass Tipped - Alloy Steel on the Small Parts and Bearings website.


Socket Set Screws - Brass Tipped - Stainless Steel
Socket Set Screws - Brass Tipped - Stainless Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.


Related Information:

There is also a good range of Socket Set Screws - Brass Tipped - Stainless Steel on the Small Parts and Bearings website.


Socket Set Screws - Cone Point
Socket Set Screws - Cone Point

Also see combined categories:
All Special Hard Tip Grub Screws
All Grub Screws

Cone point grub screws


Related Information:

There is also a good range of Socket Set Screws - Cone Point on the Small Parts and Bearings website.


Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916
Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916

Also see combined categories:
All Cup Point Standard Grub Screws
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.


Related Information:

There is also a good range of Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916 on the Small Parts and Bearings website.


Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916
Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916

Also see combined categories:
All Cup Point Standard Grub Screws
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.


Related Information:

There is also a good range of Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916 on the Small Parts and Bearings website.


Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916
Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916

Also see combined categories:
All Cup Point Standard Grub Screws
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.


Related Information:

There is also a good range of Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916 on the Small Parts and Bearings website.


Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916
Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916

Also see combined categories:
All Cup Point Standard Grub Screws
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.


Related Information:

There is also a good range of Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916 on the Small Parts and Bearings website.


Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916
Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN913 grub screws. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:

There is also a good range of Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916 on the Small Parts and Bearings website.


Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916
Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN916 grub screws with cup point. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

There is also a good range of Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916 on the Small Parts and Bearings website.


Socket Set Screws - Diamond Knurled Tip - Carbon Steel
Socket Set Screws - Diamond Knurled Tip - Carbon Steel

Also see combined categories:
All Special Hard Tip Grub Screws
All Diamond Knurled Tip Grub Screws

Grub screws that grip rough shafts.


Related Information:

There is also a good range of Socket Set Screws - Diamond Knurled Tip - Carbon Steel on the Small Parts and Bearings website.


Socket Set Screws - Diamond Knurled Tip - Stainless Steel
Socket Set Screws - Diamond Knurled Tip - Stainless Steel

Also see combined categories:
All Special Hard Tip Grub Screws
All Diamond Knurled Tip Grub Screws

Grub screws that grip rough shafts.


Related Information:

There is also a good range of Socket Set Screws - Diamond Knurled Tip - Stainless Steel on the Small Parts and Bearings website.


Socket Set Screws - Dog Point - Carbon Steel
Socket Set Screws - Dog Point - Carbon Steel

Also see combined categories:
All Special Hard Tip Grub Screws
All Dog Point Grub Screws

Dog point grub screws


Related Information:

There is also a good range of Socket Set Screws - Dog Point - Carbon Steel on the Small Parts and Bearings website.


Socket Set Screws - Flat Tip - Aligning - Carbon Steel
Socket Set Screws - Flat Tip - Aligning - Carbon Steel

Also see combined categories:
All Flat Aligning Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:

There is also a good range of Socket Set Screws - Flat Tip - Aligning - Carbon Steel on the Small Parts and Bearings website.


Socket Set Screws - Flat Tip - Aligning - Stainless Steel
Socket Set Screws - Flat Tip - Aligning - Stainless Steel

Also see combined categories:
All Flat Aligning Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:

There is also a good range of Socket Set Screws - Flat Tip - Aligning - Stainless Steel on the Small Parts and Bearings website.


Socket Set Screws - Flat Tip - Fixed - DIN913
Socket Set Screws - Flat Tip - Fixed - DIN913

Also see combined categories:
All Special Hard Tip Grub Screws
All Grub Screws

Flat tip grub screws


Related Information:

There is also a good range of Socket Set Screws - Flat Tip - Fixed - DIN913 on the Small Parts and Bearings website.


Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913
Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN913 grub screws with flat end. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

There is also a good range of Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913 on the Small Parts and Bearings website.


Socket Set Screws - Half Dog Point
Socket Set Screws - Half Dog Point

Also see combined categories:
All Special Hard Tip Grub Screws
All Dog Point Grub Screws

Half Dog Point grub screws


Related Information:

There is also a good range of Socket Set Screws - Half Dog Point on the Small Parts and Bearings website.


Socket Set Screws - Nylon Tipped - 304 Stainless Steel
Socket Set Screws - Nylon Tipped - 304 Stainless Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.


Related Information:

There is also a good range of Socket Set Screws - Nylon Tipped - 304 Stainless Steel on the Small Parts and Bearings website.


Socket Set Screws - Nylon Tipped - Alloy Steel
Socket Set Screws - Nylon Tipped - Alloy Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.


Related Information:

There is also a good range of Socket Set Screws - Nylon Tipped - Alloy Steel on the Small Parts and Bearings website.


Socket Set Screws - Oval Tip - Alloy Steel
Socket Set Screws - Oval Tip - Alloy Steel

Also see combined categories:
All Special Hard Tip Grub Screws
All Grub Screws


Related Information:

There is also a good range of Socket Set Screws - Oval Tip - Alloy Steel on the Small Parts and Bearings website.


Socket Set Screws - Rolling Ball Tip - Carbon Steel
Socket Set Screws - Rolling Ball Tip - Carbon Steel

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

There is also a good range of Socket Set Screws - Rolling Ball Tip - Carbon Steel on the Small Parts and Bearings website.


Socket Set Screws - Rolling Ball Tip - Stainless Steel
Socket Set Screws - Rolling Ball Tip - Stainless Steel

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

There is also a good range of Socket Set Screws - Rolling Ball Tip - Stainless Steel on the Small Parts and Bearings website.


Socket Set Screws - Solder Tipped - Stainless Steel
Socket Set Screws - Solder Tipped - Stainless Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Solder tipped grub screws. Allow fine adjustment and spreads over the contacting surface so as not to mark or deform it.


Related Information:

There is also a good range of Socket Set Screws - Solder Tipped - Stainless Steel on the Small Parts and Bearings website.


Screws - Set - Cup Point - Square Head
Screws - Set - Cup Point - Square Head


Grade 8 hreat treated alloy steel. All screws are threaded to the head.


There is also a good range of Screws - Set - Cup Point - Square Head on the Small Parts and Bearings website.


Screws - Set - Dog Point - Square Head
Screws - Set - Dog Point - Square Head


Grade 8 hreat treated alloy steel. All screws are threaded to the head.


There is also a good range of Screws - Set - Dog Point - Square Head on the Small Parts and Bearings website.


Couplings - Bellows - Set Screw - 316 Stainless
Couplings - Bellows - Set Screw - 316 Stainless

Also see combined categories:
All Bellows Couplings

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Stainless Steel 303L Bellows. Stainless Steel 316 Hubs.

Related Information:

There is also a good range of Couplings - Bellows - Set Screw - 316 Stainless on the Small Parts and Bearings website.


Couplings - Rigid - Set Screw
Couplings - Rigid - Set Screw

Also see combined categories:
All Rigid Couplings

0.35 to 5.1 Nm. Includes steel, stainless steel, brass and aluminium.

Quality Class Precision: Bore Tolerance +0.013 / - 0.000 concentric within 0.0127mm T.I.R. Quality Class Commercial: Bore Tolerance +0.051 / -0.000.

Related Information:

There is also a good range of Couplings - Rigid - Set Screw on the Small Parts and Bearings website.


Washers - Self Aligning - Sets - Plastic
Washers - Self Aligning - Sets - Plastic

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.

Related Information:

There is also a good range of Washers - Self Aligning - Sets - Plastic on the Small Parts and Bearings website.


Screws - Hex Head - Set - Titanium Ti-Gr5 - Ti-6Al4v
Screws - Hex Head - Set - Titanium Ti-Gr5 - Ti-6Al4v

Also see combined categories:
All Hex Head Screws

Fully threaded hex head set screws (DIN933). Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Din 933. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

There is also a good range of Screws - Hex Head - Set - Titanium Ti-Gr5 - Ti-6Al4v on the Small Parts and Bearings website.


Washers - Self Aligning - Sets - Hardened Steel
Washers - Self Aligning - Sets - Hardened Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

There is also a good range of Washers - Self Aligning - Sets - Hardened Steel on the Small Parts and Bearings website.


Washers - Self Aligning - Sets - Stainless Steel
Washers - Self Aligning - Sets - Stainless Steel

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

There is also a good range of Washers - Self Aligning - Sets - Stainless Steel on the Small Parts and Bearings website.


Couplings - Flex Beam - Set Screw Style
Couplings - Flex Beam - Set Screw Style

Also see combined categories:
All Helical and Slit Couplings

Zero backlash machined from a single piece of aluminium and featuring two sets of spiral cuts.

Higher torque and reduced windup compared to commodity type single beam couplings.

There is also a good range of Couplings - Flex Beam - Set Screw Style on the Small Parts and Bearings website.


Tools - Punches - Pilot - Sets
Tools - Punches - Pilot - Sets

Also see combined categories:
All Punches
All Tools

Vanadium Steel. Tolerance is +0.000 / -0.254mm


There is also a good range of Tools - Punches - Pilot - Sets on the Small Parts and Bearings website.


Vernier and Disc Dial Sets
Vernier and Disc Dial Sets


Precision Engraved.

2024 Aluminium Black Anodized. Engraving filled with white enamel.

There is also a good range of Vernier and Disc Dial Sets on the Small Parts and Bearings website.


Knobs - Precision - Knurled
Knobs - Precision - Knurled

Also see combined categories:
All Knurled Knobs
All Knobs

Set screw and clamp types - Stainless Steel. Also known as Thumb Knobs.

303 Stainless Steel. ID Tolerance +0.013 / -0.000 mm (+0.0005 / - 0.0000 inch).

There is also a good range of Knobs - Precision - Knurled on the Small Parts and Bearings website.


Couplings - Oldham - Complete - Acetal Disk - Set Screw
Couplings - Oldham - Complete - Acetal Disk - Set Screw

Also see combined categories:
All Insert and Jaw Type Couplings

0.06 to 44 Nm. Max Speed: 3000 RPM.

Max Speed: 3000 RPM. Parallel out of line compensation. Temp Range -20 oC to +60 oC. Oldham couplings are designed to transfer torque between two parallel, but not colinear, shafts. They have three discs, one coupled to the input, one coupled to the output, and a centre disc that is joined to the first two by tongue and grooves. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:

There is also a good range of Couplings - Oldham - Complete - Acetal Disk - Set Screw on the Small Parts and Bearings website.


Gear Racks - Flexible - Clamps
Gear Racks - Flexible - Clamps

Also see combined categories:
All Flexible Gear Racks

For clamping acetal flexirack.

For easy ready selected sets of rack and gear please see the HES website.

There is also a good range of Gear Racks - Flexible - Clamps on the Small Parts and Bearings website.


Couplings - Reli-a-flex - Short Series - Set Screw Type
Couplings - Reli-a-flex - Short Series - Set Screw Type

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:

There is also a good range of Couplings - Reli-a-flex - Short Series - Set Screw Type on the Small Parts and Bearings website.


Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Aluminium
Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Aluminium

Also see combined categories:
All Helical and Slit Couplings

Aluminium - Flexible.


There is also a good range of Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Aluminium on the Small Parts and Bearings website.


Tools - Taps - High Speed Steel - Hand - Sets
Tools - Taps - High Speed Steel - Hand - Sets

Also see combined categories:
All Taps
All Tools

Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set

High Speed Steel (HSS) Short Machine taps.

There is also a good range of Tools - Taps - High Speed Steel - Hand - Sets on the Small Parts and Bearings website.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122208 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 122208 products in 2650 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.