Screws Round Head Categories
Screws - Round Head - 304 Stainless - Slotted
Metric Only
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Round Head - 304 Stainless - Slotted.
Related Information:
There is also a good range of Screws - Round Head - 304 Stainless - Slotted on the Small Parts and Bearings website.
Screws - Round Head - Brass - Slotted
Brass metal thread machine screws BSW - UNF - UNC
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Round Head - Brass - Slotted.
Related Information:
There is also a good range of Screws - Round Head - Brass - Slotted on the Small Parts and Bearings website.
Screws - Round Head - Nylon - Slotted
UNC - UNF
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
There is also a good range of Screws - Round Head - Nylon - Slotted on the Small Parts and Bearings website.
Screws - Round Head - Steel - Slotted
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Round Head - Steel - Slotted.
Related Information:
There is also a good range of Screws - Round Head - Steel - Slotted on the Small Parts and Bearings website.
Screws - Roof Bolt - Steel
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Roof Bolt - Steel.
Related Information:
There is also a good range of Screws - Roof Bolt - Steel on the Small Parts and Bearings website.
You may also be interested in
Pins Dowel
Pins - Hammer Drive - Round Head Stainless Steel
Used to replace screws where the need to remove the pin is unlikely.
Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
Related Information:
There is also a good range of Pins - Hammer Drive - Round Head Stainless Steel on the Small Parts and Bearings website.
Screws Pan Head
Screws - Pan Head - 316 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - 316 Stainless - Philips.
Related Information:
There is also a good range of Screws - Pan Head - 316 Stainless - Philips on the Small Parts and Bearings website.
Screws - Pan Head - 303-304 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - 303-304 Stainless - Philips.
Related Information:
There is also a good range of Screws - Pan Head - 303-304 Stainless - Philips on the Small Parts and Bearings website.
Screws Hex Head
Screws - Hex Head - Steel - Zinc Plated - Standard
BSW and METRIC - Bolts
This category may be available in the new MBA online store at Screws - Hex Head - Steel - Zinc Plated - Standard.
Related Information:
There is also a good range of Screws - Hex Head - Steel - Zinc Plated - Standard on the Small Parts and Bearings website.
Screws Shoulder
Screws - Shoulder - Philips Head - Stainless
303 Stainless Steel
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Philips Head - Stainless.
There is also a good range of Screws - Shoulder - Philips Head - Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Slotted Head - Stainless
303 Stainless Steel
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Slotted Head - Stainless.
There is also a good range of Screws - Shoulder - Slotted Head - Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - 303 Stainless
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - 303 Stainless.
There is also a good range of Screws - Shoulder - Socket Head - 303 Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - 316 Stainless
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - 316 Stainless.
There is also a good range of Screws - Shoulder - Socket Head - 316 Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - 416 Stainless
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - 416 Stainless.
There is also a good range of Screws - Shoulder - Socket Head - 416 Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - Carbon Steel
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - Carbon Steel.
There is also a good range of Screws - Shoulder - Socket Head - Carbon Steel on the Small Parts and Bearings website.
Screws - Shoulder - Slotted Shallow Head - Carbon Steel
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Slotted Shallow Head - Carbon Steel.
There is also a good range of Screws - Shoulder - Slotted Shallow Head - Carbon Steel on the Small Parts and Bearings website.
Screws Cap Head
Screws - Low Head - Socket - 316L Stainless
316L Stainless Steel. Other sizes available on request.
Hexagon socket cap head with low head. Safety improvements and compact size for equipment and devices. May be used in vacuum chamber applications in clean rooms, Flat Panel Displays, Semiconductor production equipment and devices. All clean washed, preventing the inclusion of oil and foreign particles. This category may be available in the new MBA online store at Screws - Low Head - Socket - 316L Stainless.
There is also a good range of Screws - Low Head - Socket - 316L Stainless on the Small Parts and Bearings website.
Screws - Low Head - Socket - Standard - Standard
UNC - UNF - METRIC - Alloy Steel.
Note. Hex key size may. The size listed is the usual and minimum size. This category may be available in the new MBA online store at Screws - Low Head - Socket - Standard - Standard.
Related Information:
There is also a good range of Screws - Low Head - Socket - Standard - Standard on the Small Parts and Bearings website.
Screws Cheese Head
Screws - Fillister Head - 304 Stainless - Philips
UNC Only
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Fillister Head - 304 Stainless - Philips.
Related Information:
There is also a good range of Screws - Fillister Head - 304 Stainless - Philips on the Small Parts and Bearings website.
Screws - Fillister Head - 304 Stainless - Slotted
Metric - UNC - UNF
Nuts sold seperately - See Nuts. DIN 84. This category may be available in the new MBA online store at Screws - Fillister Head - 304 Stainless - Slotted.
Related Information:
There is also a good range of Screws - Fillister Head - 304 Stainless - Slotted on the Small Parts and Bearings website.
Screws - Fillister Head - 316 Stainless - Slotted
Metric - UNC - UNF
Nuts sold seperately - See Nuts. DIN 84. This category may be available in the new MBA online store at Screws - Fillister Head - 316 Stainless - Slotted.
Related Information:
There is also a good range of Screws - Fillister Head - 316 Stainless - Slotted on the Small Parts and Bearings website.
Screws - Fillister Head - Brass - Philips
Brass metal thread machine screws BA and METRIC
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Fillister Head - Brass - Philips.
Related Information:
There is also a good range of Screws - Fillister Head - Brass - Philips on the Small Parts and Bearings website.
Screws - Fillister Head - Brass - Slotted
Brass metal thread machine screws BA and METRIC
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Fillister Head - Brass - Slotted.
Related Information:
There is also a good range of Screws - Fillister Head - Brass - Slotted on the Small Parts and Bearings website.
Screws - Fillister Head - Nylon - Slotted
UNC - UNF. Cheese head
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
There is also a good range of Screws - Fillister Head - Nylon - Slotted on the Small Parts and Bearings website.
Screws - Fillister Head - Steel - Philips
Metal Thread Screws BA - UNC - UNF - METRIC
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Fillister Head - Steel - Philips.
Related Information:
There is also a good range of Screws - Fillister Head - Steel - Philips on the Small Parts and Bearings website.
Screws - Fillister Head - Steel - Slotted
Metal Thread Screws BA - UNC - UNF - METRIC
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Fillister Head - Steel - Slotted.
Related Information:
There is also a good range of Screws - Fillister Head - Steel - Slotted on the Small Parts and Bearings website.
Screws Hex Head
Screws - Hex Head - 304 Stainless - Standard
Metric - UNF - UNC
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Hex Head - 304 Stainless - Standard.
Related Information:
There is also a good range of Screws - Hex Head - 304 Stainless - Standard on the Small Parts and Bearings website.
Screws - Hex Head - Brass
Brass metal thread machine screws UNC and UNF
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Hex Head - Brass.
Related Information:
There is also a good range of Screws - Hex Head - Brass on the Small Parts and Bearings website.
Screws - Hex Head - Nylon - Slotted
UNC - UNF
This category may be available in the new MBA online store at Screws - Hex Head - Nylon - Slotted.
Related Information:
There is also a good range of Screws - Hex Head - Nylon - Slotted on the Small Parts and Bearings website.
Screws - Hex Head - Plain - Nylon
UNC - UNF
This category may be available in the new MBA online store at Screws - Hex Head - Plain - Nylon.
Related Information:
There is also a good range of Screws - Hex Head - Plain - Nylon on the Small Parts and Bearings website.
Screws - Hex Head - Set - Titanium Ti-Gr5 - Ti-6Al4v
Fully threaded hex head set screws (DIN933). Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Din 933. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent. This category may be available in the new MBA online store at Screws - Hex Head - Set - Titanium Ti-Gr5 - Ti-6Al4v.
Related Information:
There is also a good range of Screws - Hex Head - Set - Titanium Ti-Gr5 - Ti-6Al4v on the Small Parts and Bearings website.
Screws - Hex Head - Steel - Zinc Plated - Full Thread
BSW and METRIC - Set Screws
This category may be available in the new MBA online store at Screws - Hex Head - Steel - Zinc Plated - Full Thread.
Related Information:
There is also a good range of Screws - Hex Head - Steel - Zinc Plated - Full Thread on the Small Parts and Bearings website.
Screws - Hex Head - Titanium CP Grade 1
Fully threaded hex head set screws (DIN933). CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Din 933. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. This category may be available in the new MBA online store at Screws - Hex Head - Titanium CP Grade 1.
Related Information:
There is also a good range of Screws - Hex Head - Titanium CP Grade 1 on the Small Parts and Bearings website.
Screws Pan Head
Screws - Binder Head - Nylon - Philips
UNC - UNF - Metric
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
There is also a good range of Screws - Binder Head - Nylon - Philips on the Small Parts and Bearings website.
Screws - Binder Head - Nylon - Slotted
UNC and UNF
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
There is also a good range of Screws - Binder Head - Nylon - Slotted on the Small Parts and Bearings website.
Screws - Pan Head - 303-304 Stainless - Pozidrive
Metric Only
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - 303-304 Stainless - Pozidrive.
Related Information:
There is also a good range of Screws - Pan Head - 303-304 Stainless - Pozidrive on the Small Parts and Bearings website.
Screws - Pan Head - 303-304 Stainless - Slotted
Metric Only
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - 303-304 Stainless - Slotted.
Related Information:
There is also a good range of Screws - Pan Head - 303-304 Stainless - Slotted on the Small Parts and Bearings website.
Screws - Pan Head - 316 Stainless - Pozidrive
Metric Only
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - 316 Stainless - Pozidrive.
Related Information:
There is also a good range of Screws - Pan Head - 316 Stainless - Pozidrive on the Small Parts and Bearings website.
Screws - Pan Head - Aluminium
UNC metal thread machine screws
Nuts sold separately - See Fasteners - Nuts. This category may be available in the new MBA online store at Screws - Pan Head - Aluminium.
Related Information:
There is also a good range of Screws - Pan Head - Aluminium on the Small Parts and Bearings website.
Screws - Pan Head - Brass - Slotted
Brass metal thread machine screws METRIC
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - Brass - Slotted.
Related Information:
There is also a good range of Screws - Pan Head - Brass - Slotted on the Small Parts and Bearings website.
Screws - Pan Head - Nylon - Slotted
UNC - UNF - Metric
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
There is also a good range of Screws - Pan Head - Nylon - Slotted on the Small Parts and Bearings website.
Screws - Pan Head - PEEK - Philips
Machine screws. PEEK is a super-engineering thermoplastic with special physical and chemical characteristics. Excellent resistance to chemicals, water, abrasion, shock, fatigue, radiation, heat, etc. PEEK is registered trademark of VitreTM.
Excellent chemical resistance, impenetrable by most chemicals with the exception of concentrated sulphuric acid. Excellent thermal and water resistance; maintains high heat-resistance strength. Excellent abrasion, shock and fatigue resistance. Excellent radiation resistance and electrical properties. Heat-resistant temperature: 180o Celcius (UL approved temperature). Excellent flame-resistance cleared by UL standard 94V-0. Useful for hot-water pumps, chemical pumps, chemical-resistant applications such as FPD (Flat Panel Display) and semiconductor production equipment/devices, printed circuit board etching devices, metal plating equipment and chemical plants. Use with a nut to compensate for thread moulding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20mm. For further information on the special properties of plastic screws and cautions concerning their use, please contact sales.
Related Information:
There is also a good range of Screws - Pan Head - PEEK - Philips on the Small Parts and Bearings website.
Screws - Pan Head - Steel - Philips
Metal Thread Screws UNC - UNF - METRIC
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - Steel - Philips.
Related Information:
There is also a good range of Screws - Pan Head - Steel - Philips on the Small Parts and Bearings website.
Screws - Pan Head - Steel - Pozidrive
Metal Thread Screws. Metric only.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - Steel - Pozidrive.
Related Information:
There is also a good range of Screws - Pan Head - Steel - Pozidrive on the Small Parts and Bearings website.
Screws - Pan Head - Steel - Slotted
Metal Thread Screws. Metric only.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Pan Head - Steel - Slotted.
Related Information:
There is also a good range of Screws - Pan Head - Steel - Slotted on the Small Parts and Bearings website.
Screws - Pan Head - Titanium CP Grade 1 - Philips Drive
Metal Thread Screws. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. This category may be available in the new MBA online store at Screws - Pan Head - Titanium CP Grade 1 - Philips Drive.
Related Information:
There is also a good range of Screws - Pan Head - Titanium CP Grade 1 - Philips Drive on the Small Parts and Bearings website.
Knobs Thumb
Knobs - Thumb For Hex Head Screw
These plastic knobs fit hex head bolts or set screws, not socket cap screws.
To fit Hex Head bolts or Set Screws Screws (Not included). Screw secured in hex recess inside the knob with a twist turn plastic cap. Made From Plastic. This category may be available in the new MBA online store at Knobs - Thumb For Hex Head Screw.
Related Information:
There is also a good range of Knobs - Thumb For Hex Head Screw on the Small Parts and Bearings website.
Screws - Ultra Low Head - Socket - Stainless Steel
Metric 304 Stainless
Note. Hex key size may. The size listed is the usual and minimum size. This category may be available in the new MBA online store at Screws - Ultra Low Head - Socket - Stainless Steel.
Related Information:
There is also a good range of Screws - Ultra Low Head - Socket - Stainless Steel on the Small Parts and Bearings website.
Screws - Ultra Low Head - Socket - Steel
Metric Steel with Phosphate Treatment
Note. Hex key size may. The size listed is the usual and minimum size. This category may be available in the new MBA online store at Screws - Ultra Low Head - Socket - Steel.
Related Information:
There is also a good range of Screws - Ultra Low Head - Socket - Steel on the Small Parts and Bearings website.
Screws - Hex Washer Head - Black Nylon
1/4 UNC and UNF only
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
There is also a good range of Screws - Hex Washer Head - Black Nylon on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 227673 products in 2187 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
