Screws Grub Categories
Socket Set Screws - Cone Point
Cone point grub screws
Related Information:
There is also a good range of Socket Set Screws - Cone Point on the Small Parts and Bearings website.
Socket Set Screws - Half Dog Point
Half Dog Point grub screws
Related Information:
There is also a good range of Socket Set Screws - Half Dog Point on the Small Parts and Bearings website.
Socket Set Screws - Acetal Tipped - Alloy Steel
Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.
Related Information:
There is also a good range of Socket Set Screws - Acetal Tipped - Alloy Steel on the Small Parts and Bearings website.
Socket Set Screws - Acetal Tipped - Stainless Steel
Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.
Related Information:
There is also a good range of Socket Set Screws - Acetal Tipped - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Brass Tipped - Alloy Steel
Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.
Related Information:
There is also a good range of Socket Set Screws - Brass Tipped - Alloy Steel on the Small Parts and Bearings website.
Socket Set Screws - Brass Tipped - Stainless Steel
Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.
Related Information:
There is also a good range of Socket Set Screws - Brass Tipped - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Dog Point - Carbon Steel
Dog point grub screws
Related Information:
There is also a good range of Socket Set Screws - Dog Point - Carbon Steel on the Small Parts and Bearings website.
Socket Set Screws - Flat Tip - Fixed - DIN913
Flat tip grub screws
Related Information:
There is also a good range of Socket Set Screws - Flat Tip - Fixed - DIN913 on the Small Parts and Bearings website.
Socket Set Screws - Nylon Tipped - Alloy Steel
Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.
Related Information:
There is also a good range of Socket Set Screws - Nylon Tipped - Alloy Steel on the Small Parts and Bearings website.
Socket Set Screws - Oval Tip - Alloy Steel
Related Information:
There is also a good range of Socket Set Screws - Oval Tip - Alloy Steel on the Small Parts and Bearings website.
Socket Set Screws - Solder Tipped - Stainless Steel
Solder tipped grub screws. Allow fine adjustment and spreads over the contacting surface so as not to mark or deform it.
Related Information:
There is also a good range of Socket Set Screws - Solder Tipped - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Diamond Knurled Tip - Carbon Steel
Grub screws that grip rough shafts.
Related Information:
There is also a good range of Socket Set Screws - Diamond Knurled Tip - Carbon Steel on the Small Parts and Bearings website.
Socket Set Screws - Diamond Knurled Tip - Stainless Steel
Grub screws that grip rough shafts.
Related Information:
There is also a good range of Socket Set Screws - Diamond Knurled Tip - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Flat Tip - Aligning - Carbon Steel
Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.
Also known as a flat ball tip set screw or a clamping screw.
Related Information:
There is also a good range of Socket Set Screws - Flat Tip - Aligning - Carbon Steel on the Small Parts and Bearings website.
Socket Set Screws - Flat Tip - Aligning - Stainless Steel
Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.
Also known as a flat ball tip set screw or a clamping screw.
Related Information:
There is also a good range of Socket Set Screws - Flat Tip - Aligning - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Nylon Tipped - 304 Stainless Steel
Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.
Related Information:
There is also a good range of Socket Set Screws - Nylon Tipped - 304 Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Rolling Ball Tip - Carbon Steel
Rolling ball tip for locating into a hole
Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.
Related Information:
There is also a good range of Socket Set Screws - Rolling Ball Tip - Carbon Steel on the Small Parts and Bearings website.
Socket Set Screws - Rolling Ball Tip - Stainless Steel
Rolling ball tip for locating into a hole
Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.
Related Information:
There is also a good range of Socket Set Screws - Rolling Ball Tip - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916
Standard DIN913 grub screws. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916
Standard DIN916 grub screws with cup point. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913
Standard DIN913 grub screws with flat end. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913 on the Small Parts and Bearings website.
You may also be interested in
Collars
Collars - Shaft - Standard - Nylon
Standard one piece nylon shaft collar with set screw
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.
Related Information:
There is also a good range of Collars - Shaft - Standard - Nylon on the Small Parts and Bearings website.
Couplings Other
Couplings - BoWex - Junior
Nylon 2 piece and 3 piece couplings. 5 to 24 Nm. 6000 rpm max.
Approved distribution through the Australian Wholesaler (Deanquip). Crowned gear teeth - No need for lubrication. Chemical resistant nylon. Electrically insulated. Grub Screw opposite Keyway.
Related Information:
There is also a good range of Couplings - BoWex - Junior on the Small Parts and Bearings website.
Bearings for Housings
Bearings - For Cast Iron Housings
Insert bearings with spherical OD for use with cast iron flanged and pillow block housings.
Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing.
Related Information:
There is also a good range of Bearings - For Cast Iron Housings on the Small Parts and Bearings website.
Bearings - For Pressed Metal Housings
Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.
Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request.
Related Information:
There is also a good range of Bearings - For Pressed Metal Housings on the Small Parts and Bearings website.
Collars
Collars - Shaft - Standard - Steel
Includes miniature precision types. Carbon steel.
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.
Related Information:
There is also a good range of Collars - Shaft - Standard - Steel on the Small Parts and Bearings website.
Collars - Shaft - Standard - Stainless Steel
Includes miniature precision types. 303 and 316 Types.
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.
Related Information:
There is also a good range of Collars - Shaft - Standard - Stainless Steel on the Small Parts and Bearings website.
Pulleys Timing H Pitch 12.7mm
Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Through Bore
Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.
Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size.
Related Information:
There is also a good range of Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Through Bore
Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.
Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size.
Related Information:
There is also a good range of Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Through Bore
Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.
Steel and Cast Iron. No grub screw. Hub requires drilling and tapping. Bore requires machining to finished size.
Related Information:
There is also a good range of Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys Timing AT10 10mm
Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore on the Small Parts and Bearings website.
Gears Inch Spur
Gears - Spur - 24DP - 20 Degree - Plastic - Plain
PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 24DP - 20 Degree - Plastic - Plain on the Small Parts and Bearings website.
Gears - Spur - 24DP - 20 Degree - Plastic with Insert
PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.
Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.
Related Information:
There is also a good range of Gears - Spur - 24DP - 20 Degree - Plastic with Insert on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron.
Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - GT2 - 9mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 9mm wide. Aluminium, steel and cast iron.
Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - GT2 - 9mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore
Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 9.5 to 10.0mm wide.
Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore
Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.
Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 5.000mm Pitch - T5 - 25mm Wide - Through Bore
Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 25.0mm to 25.4mm wide.
Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.
Related Information:
There is also a good range of Pulleys - Timing - 5.000mm Pitch - T5 - 25mm Wide - Through Bore on the Small Parts and Bearings website.
Screws - Roof Bolt - Steel
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts.
Related Information:
There is also a good range of Screws - Roof Bolt - Steel on the Small Parts and Bearings website.
Screws - Hex Head - Steel - Zinc Plated
BSW and METRIC - Bolts
Related Information:
There is also a good range of Screws - Hex Head - Steel - Zinc Plated on the Small Parts and Bearings website.
Screws - Shoulder - Slotted Shallow Head - Carbon Steel
Also known as stripper bolts.
There is also a good range of Screws - Shoulder - Slotted Shallow Head - Carbon Steel on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - 303 Stainless
Also known as stripper bolts.
There is also a good range of Screws - Shoulder - Socket Head - 303 Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - 416 Stainless
Also known as stripper bolts.
There is also a good range of Screws - Shoulder - Socket Head - 416 Stainless on the Small Parts and Bearings website.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Distributor Locations
China
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 125355 products in 2309 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Miniature Bearings Australia products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
