Screws Grub Categories
Slotted Set Screws - Partial Thread
Partially threaded metric slotted drive set screws - grub screws
This category may be available in the new MBA online store at Slotted Set Screws - Partial Thread.
Related Information:
There is also a good range of Slotted Set Screws - Partial Thread on the Small Parts and Bearings website.
Socket Set Screws - Cone Point
Cone point grub screws
This category may be available in the new MBA online store at Socket Set Screws - Cone Point.
Related Information:
There is also a good range of Socket Set Screws - Cone Point on the Small Parts and Bearings website.
Socket Set Screws - Half Dog Point
Half Dog Point grub screws
This category may be available in the new MBA online store at Socket Set Screws - Half Dog Point.
Related Information:
There is also a good range of Socket Set Screws - Half Dog Point on the Small Parts and Bearings website.
Socket Set Screws - Acetal Tipped - Alloy Steel
Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.
This category may be available in the new MBA online store at Socket Set Screws - Acetal Tipped - Alloy Steel.
Related Information:
There is also a good range of Socket Set Screws - Acetal Tipped - Alloy Steel on the Small Parts and Bearings website.
Socket Set Screws - Acetal Tipped - Stainless Steel
Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.
This category may be available in the new MBA online store at Socket Set Screws - Acetal Tipped - Stainless Steel.
Related Information:
There is also a good range of Socket Set Screws - Acetal Tipped - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Brass Tipped - Alloy Steel
Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.
This category may be available in the new MBA online store at Socket Set Screws - Brass Tipped - Alloy Steel.
Related Information:
There is also a good range of Socket Set Screws - Brass Tipped - Alloy Steel on the Small Parts and Bearings website.
Socket Set Screws - Brass Tipped - Stainless Steel
Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.
This category may be available in the new MBA online store at Socket Set Screws - Brass Tipped - Stainless Steel.
Related Information:
There is also a good range of Socket Set Screws - Brass Tipped - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Dog Point - Carbon Steel
Dog point grub screws
This category may be available in the new MBA online store at Socket Set Screws - Dog Point - Carbon Steel.
Related Information:
There is also a good range of Socket Set Screws - Dog Point - Carbon Steel on the Small Parts and Bearings website.
Socket Set Screws - Flat Tip - Fixed - DIN913
Flat tip grub screws
This category may be available in the new MBA online store at Socket Set Screws - Flat Tip - Fixed - DIN913.
Related Information:
There is also a good range of Socket Set Screws - Flat Tip - Fixed - DIN913 on the Small Parts and Bearings website.
Socket Set Screws - Nylon Tipped - Alloy Steel
Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.
This category may be available in the new MBA online store at Socket Set Screws - Nylon Tipped - Alloy Steel.
Related Information:
There is also a good range of Socket Set Screws - Nylon Tipped - Alloy Steel on the Small Parts and Bearings website.
Socket Set Screws - Oval Tip - Alloy Steel
This category may be available in the new MBA online store at Socket Set Screws - Oval Tip - Alloy Steel.
Related Information:
There is also a good range of Socket Set Screws - Oval Tip - Alloy Steel on the Small Parts and Bearings website.
Socket Set Screws - Solder Tipped - Stainless Steel
Solder tipped grub screws. Allow fine adjustment and spreads over the contacting surface so as not to mark or deform it.
This category may be available in the new MBA online store at Socket Set Screws - Solder Tipped - Stainless Steel.
Related Information:
There is also a good range of Socket Set Screws - Solder Tipped - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Diamond Knurled Tip - Stainless Steel
Grub screws that grip rough shafts.
This category may be available in the new MBA online store at Socket Set Screws - Diamond Knurled Tip - Stainless Steel.
Related Information:
There is also a good range of Socket Set Screws - Diamond Knurled Tip - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Flat Tip - Aligning - Carbon Steel
Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.
Also known as a flat ball tip set screw or a clamping screw. This category may be available in the new MBA online store at Socket Set Screws - Flat Tip - Aligning - Carbon Steel.
Related Information:
There is also a good range of Socket Set Screws - Flat Tip - Aligning - Carbon Steel on the Small Parts and Bearings website.
Socket Set Screws - Flat Tip - Aligning - Stainless Steel
Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.
Also known as a flat ball tip set screw or a clamping screw. This category may be available in the new MBA online store at Socket Set Screws - Flat Tip - Aligning - Stainless Steel.
Related Information:
There is also a good range of Socket Set Screws - Flat Tip - Aligning - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Nylon Tipped - 304 Stainless Steel
Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.
This category may be available in the new MBA online store at Socket Set Screws - Nylon Tipped - 304 Stainless Steel.
Related Information:
There is also a good range of Socket Set Screws - Nylon Tipped - 304 Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Rolling Ball Tip - Carbon Steel
Rolling ball tip for locating into a hole
Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application. This category may be available in the new MBA online store at Socket Set Screws - Rolling Ball Tip - Carbon Steel.
Related Information:
There is also a good range of Socket Set Screws - Rolling Ball Tip - Carbon Steel on the Small Parts and Bearings website.
Socket Set Screws - Rolling Ball Tip - Stainless Steel
Rolling ball tip for locating into a hole
Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application. This category may be available in the new MBA online store at Socket Set Screws - Rolling Ball Tip - Stainless Steel.
Related Information:
There is also a good range of Socket Set Screws - Rolling Ball Tip - Stainless Steel on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
This category may be available in the new MBA online store at Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
This category may be available in the new MBA online store at Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916
Standard DIN913 grub screws. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. This category may be available in the new MBA online store at Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916
Standard DIN916 grub screws with cup point. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916 on the Small Parts and Bearings website.
Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913
Standard DIN913 grub screws with flat end. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
There is also a good range of Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913 on the Small Parts and Bearings website.
You may also be interested in
Knobs Pointer
Knobs - Pointer - Skirted
Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass insert.
This category may be available in the new MBA online store at Knobs - Pointer - Skirted.
Related Information:
There is also a good range of Knobs - Pointer - Skirted on the Small Parts and Bearings website.
Pulleys Timing AT10 10mm
Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore on the Small Parts and Bearings website.
Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
There is also a good range of Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore on the Small Parts and Bearings website.
Collars
Collars - Shaft - Standard - Nylon
Standard one piece nylon shaft collar with set screw
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft. This category may be available in the new MBA online store at Collars - Shaft - Standard - Nylon.
Related Information:
There is also a good range of Collars - Shaft - Standard - Nylon on the Small Parts and Bearings website.
Gears Inch Spur
Gears - Spur - 24DP - 20 Degree - Plastic - Plain
PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.
FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 24DP - 20 Degree - Plastic - Plain.
There is also a good range of Gears - Spur - 24DP - 20 Degree - Plastic - Plain on the Small Parts and Bearings website.
Gears - Spur - 24DP - 20 Degree - Plastic with Insert
PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.
FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 24DP - 20 Degree - Plastic with Insert.
There is also a good range of Gears - Spur - 24DP - 20 Degree - Plastic with Insert on the Small Parts and Bearings website.
Gears - Spur - 24DP - 20 Degree - Stainless
PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. 303 Stainless Steel. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.
FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. This category may be available in the new MBA online store at Gears - Spur - 24DP - 20 Degree - Stainless.
There is also a good range of Gears - Spur - 24DP - 20 Degree - Stainless on the Small Parts and Bearings website.
Collars - Shaft - Standard - Steel
Includes miniature precision types. Carbon steel.
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft. This category may be available in the new MBA online store at Collars - Shaft - Standard - Steel.
Related Information:
There is also a good range of Collars - Shaft - Standard - Steel on the Small Parts and Bearings website.
Bearings - For Cast Iron Housings
Insert bearings with spherical OD for use with cast iron flanged and pillow block housings.
Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing. This category may be available in the new MBA online store at Bearings - For Cast Iron Housings.
Related Information:
There is also a good range of Bearings - For Cast Iron Housings on the Small Parts and Bearings website.
Bearings - For Pressed Metal Housings
Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.
Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request. This category may be available in the new MBA online store at Bearings - For Pressed Metal Housings.
Related Information:
There is also a good range of Bearings - For Pressed Metal Housings on the Small Parts and Bearings website.
Screws - Roof Bolt - Steel
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Roof Bolt - Steel.
Related Information:
There is also a good range of Screws - Roof Bolt - Steel on the Small Parts and Bearings website.
Collars - Shaft - Standard - Stainless Steel
Includes miniature precision types. 303 and 316 Types.
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft. This category may be available in the new MBA online store at Collars - Shaft - Standard - Stainless Steel.
Related Information:
There is also a good range of Collars - Shaft - Standard - Stainless Steel on the Small Parts and Bearings website.
Screws - Hex Head - Steel - Zinc Plated
BSW and METRIC - Bolts
This category may be available in the new MBA online store at Screws - Hex Head - Steel - Zinc Plated.
Related Information:
There is also a good range of Screws - Hex Head - Steel - Zinc Plated on the Small Parts and Bearings website.
Tools - Screw Extractors
The quick and easy way to remove broken screws, bolts, pipes and studs.
Note! You will also need a drill bit of the correct size for each extractor. This category may be available in the new MBA online store at Tools - Screw Extractors.
There is also a good range of Tools - Screw Extractors on the Small Parts and Bearings website.
Screws - Shoulder - Philips Head - Stainless
303 Stainless Steel
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Philips Head - Stainless.
There is also a good range of Screws - Shoulder - Philips Head - Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Slotted Head - Stainless
303 Stainless Steel
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Slotted Head - Stainless.
There is also a good range of Screws - Shoulder - Slotted Head - Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - 303 Stainless
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - 303 Stainless.
There is also a good range of Screws - Shoulder - Socket Head - 303 Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - 316 Stainless
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - 316 Stainless.
There is also a good range of Screws - Shoulder - Socket Head - 316 Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - 416 Stainless
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - 416 Stainless.
There is also a good range of Screws - Shoulder - Socket Head - 416 Stainless on the Small Parts and Bearings website.
Screws - Shoulder - Socket Head - Carbon Steel
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Socket Head - Carbon Steel.
There is also a good range of Screws - Shoulder - Socket Head - Carbon Steel on the Small Parts and Bearings website.
Screws - Shoulder - Slotted Shallow Head - Carbon Steel
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Slotted Shallow Head - Carbon Steel.
There is also a good range of Screws - Shoulder - Slotted Shallow Head - Carbon Steel on the Small Parts and Bearings website.
Screws - Shoulder - Jig and Fixture - Steel
Used in construction of tool, jig and fixture work. 4140L heat treated steel with black oxide finish.
Also known as stripper bolts. This category may be available in the new MBA online store at Screws - Shoulder - Jig and Fixture - Steel.
There is also a good range of Screws - Shoulder - Jig and Fixture - Steel on the Small Parts and Bearings website.
Screws - Thumb - Dog Point
This category may be available in the new MBA online store at Screws - Thumb - Dog Point.
Related Information:
There is also a good range of Screws - Thumb - Dog Point on the Small Parts and Bearings website.
Main Pages
5 Axis Machine Tool Bearings
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Catalogue
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Charity
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Distributor Locations
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
McMaster Carr Cross Reference PDF
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Satellite Reaction Wheels
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)
Miniature Bearings Australia offers 204479 products in 2107 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.
