Miniature Bearings Australia Pty Ltd

Rod Ends Studded Categories


Rod Ends - Steel - Studded - Nylon Seat Female
Rod Ends - Steel - Studded - Nylon Seat Female

Also see combined categories:
All Female Rod Ends with Stud

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated. This category may be available in the new MBA online store at Rod Ends - Steel - Studded - Nylon Seat Female.

There is also a good range of Rod Ends - Steel - Studded - Nylon Seat Female on the Small Parts and Bearings website.


You may also be interested in

Rod Ends Plastic


Rod Ends - Plastic Female
Rod Ends - Plastic Female

Also see combined categories:
All Female Rod Ends

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Plastic Female.

There is also a good range of Rod Ends - Plastic Female on the Small Parts and Bearings website.


Rod Ends - Plastic Male
Rod Ends - Plastic Male

Also see combined categories:
All Male Rod Ends

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Plastic Male.

There is also a good range of Rod Ends - Plastic Male on the Small Parts and Bearings website.


Rod Ends PTFE Lined


Rod Ends - Steel - PTFE Lined - Tempered Steel Female
Rod Ends - Steel - PTFE Lined - Tempered Steel Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric. Forged tempered steel. Rolled thread. Surface galvanised. Also known as Heim Joints. Nylon - ptfe - glass compound race.

Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tempered Steel Female.

There is also a good range of Rod Ends - Steel - PTFE Lined - Tempered Steel Female on the Small Parts and Bearings website.


Rod Ends - Steel - PTFE Lined - Tempered Steel Male
Rod Ends - Steel - PTFE Lined - Tempered Steel Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric. Forged tempered steel. Rolled thread. Surface galvanised. Also known as Heim Joints. Nylon - ptfe - glass compound race.

Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tempered Steel Male.

There is also a good range of Rod Ends - Steel - PTFE Lined - Tempered Steel Male on the Small Parts and Bearings website.


Rod Ends - Steel - PTFE Lined - Tight Fit Female
Rod Ends - Steel - PTFE Lined - Tight Fit Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tight Fit Female.

There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit Female on the Small Parts and Bearings website.


Rod Ends - Steel - PTFE Lined - Tight Fit Male
Rod Ends - Steel - PTFE Lined - Tight Fit Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tight Fit Male.

There is also a good range of Rod Ends - Steel - PTFE Lined - Tight Fit Male on the Small Parts and Bearings website.


Rod Ends Stainless Steel


Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway Female
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway Female

Also see combined categories:
All Female Rod Ends
All Stainless Steel Female Rod Ends

Also known as Heim Joints


There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway Female on the Small Parts and Bearings website.


Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway Male
Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway Male

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Also known as Heim Joints


There is also a good range of Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway Male on the Small Parts and Bearings website.


Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined Female
Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined Female

Also see combined categories:
All Female Rod Ends
All Stainless Steel Female Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request.

There is also a good range of Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined Female on the Small Parts and Bearings website.


Rod Ends - Stainless Steel - Bronze Lined Male
Rod Ends - Stainless Steel - Bronze Lined Male

Also see combined categories:
All Male Rod Ends
All Stainless Steel Male Rod Ends

Also known as Heim Joints

Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK. This category may be available in the new MBA online store at Rod Ends - Stainless Steel - Bronze Lined Male.

There is also a good range of Rod Ends - Stainless Steel - Bronze Lined Male on the Small Parts and Bearings website.


Rod Ends Stamped


Rod Ends - Steel - Stamped Female
Rod Ends - Steel - Stamped Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Economy stamped style combines high strength with low cost. Also known as Heim Joints

Made from low carbon steel and plated for corrosion resistance. Ball is case hardened. This category may be available in the new MBA online store at Rod Ends - Steel - Stamped Female.

There is also a good range of Rod Ends - Steel - Stamped Female on the Small Parts and Bearings website.


Rod Ends Standard


Rod Ends - Steel - Bronze Lined Female
Rod Ends - Steel - Bronze Lined Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined Female.

There is also a good range of Rod Ends - Steel - Bronze Lined Female on the Small Parts and Bearings website.


Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Female
Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination. Also known as Heim Joints

Maintenance free and no lubrication necessary. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Female.

There is also a good range of Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Female on the Small Parts and Bearings website.


Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Male
Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination.

Maintenance free and no lubrication necessary. Also known as Heim Joints. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Male.

There is also a good range of Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Male on the Small Parts and Bearings website.


Rod Ends - Steel - Bronze Lined Male
Rod Ends - Steel - Bronze Lined Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined Male.

There is also a good range of Rod Ends - Steel - Bronze Lined Male on the Small Parts and Bearings website.


Rod Ends - Steel - Nylon Raceway Female
Rod Ends - Steel - Nylon Raceway Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Also known as Heim Joints

This category may be available in the new MBA online store at Rod Ends - Steel - Nylon Raceway Female.

There is also a good range of Rod Ends - Steel - Nylon Raceway Female on the Small Parts and Bearings website.


Rod Ends - Steel - Nylon Raceway Male
Rod Ends - Steel - Nylon Raceway Male

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Also known as Heim Joints

This category may be available in the new MBA online store at Rod Ends - Steel - Nylon Raceway Male.

There is also a good range of Rod Ends - Steel - Nylon Raceway Male on the Small Parts and Bearings website.


Balls Metallic


Balls - Bored - Steel
Balls - Bored - Steel

Also see combined categories:
All Metallic Balls - Bored

Bored steel balls as used in steel rod ends.

Hardness: 58-64 Rc. Material: SUJ-2. This category may be available in the new MBA online store at Balls - Bored - Steel.

Related Information:

There is also a good range of Balls - Bored - Steel on the Small Parts and Bearings website.


Balls Plastic


Balls - Bored - Plastic
Balls - Bored - Plastic

Also see combined categories:
All Plastic Balls - Bored

Bored acetal balls as used in plastic rod ends.

Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight. This category may be available in the new MBA online store at Balls - Bored - Plastic.

Related Information:

There is also a good range of Balls - Bored - Plastic on the Small Parts and Bearings website.


Bungs


Bungs and Caps - Reversible - Round
Bungs and Caps - Reversible - Round


Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges. This category may be available in the new MBA online store at Bungs and Caps - Reversible - Round.

Related Information:

There is also a good range of Bungs and Caps - Reversible - Round on the Small Parts and Bearings website.


Bar and Rod


Hexagonal Bar - Brass
Hexagonal Bar - Brass

Also see combined categories:
All Metal Bar - Hexagonal

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small A/F sizes may not be perfectly straight. This category may be available in the new MBA online store at Hexagonal Bar - Brass.

There is also a good range of Hexagonal Bar - Brass on the Small Parts and Bearings website.


Square Bar - Brass
Square Bar - Brass

Also see combined categories:
All Metal Bar - Square

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight. This category may be available in the new MBA online store at Square Bar - Brass.

There is also a good range of Square Bar - Brass on the Small Parts and Bearings website.


Hexagonal Bar - Carbon Steel
Hexagonal Bar - Carbon Steel

Also see combined categories:
All Metal Bar - Hexagonal

Saw Cut Ends. Small A/F sizes may not be perfectly straight. This category may be available in the new MBA online store at Hexagonal Bar - Carbon Steel.

There is also a good range of Hexagonal Bar - Carbon Steel on the Small Parts and Bearings website.


Hexagonal Bar - Titanium Ti-Gr2 - Rolled
Hexagonal Bar - Titanium Ti-Gr2 - Rolled

Also see combined categories:
All Metal Bar - Hexagonal

Cold rolled hex bar to ASTM B348

Saw Cut Ends. This category may be available in the new MBA online store at Hexagonal Bar - Titanium Ti-Gr2 - Rolled.

There is also a good range of Hexagonal Bar - Titanium Ti-Gr2 - Rolled on the Small Parts and Bearings website.


Hexagonal Bar - Titanium Ti-Gr2 - Drawn
Hexagonal Bar - Titanium Ti-Gr2 - Drawn

Also see combined categories:
All Metal Bar - Hexagonal

Cold rolled and hot drawn hex bar to ASTM B348

Saw Cut Ends. This category may be available in the new MBA online store at Hexagonal Bar - Titanium Ti-Gr2 - Drawn.

There is also a good range of Hexagonal Bar - Titanium Ti-Gr2 - Drawn on the Small Parts and Bearings website.


Rod - Drill Blanks
Rod - Drill Blanks

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc. This category may be available in the new MBA online store at Rod - Drill Blanks.

There is also a good range of Rod - Drill Blanks on the Small Parts and Bearings website.


Rod - Drill - A-2 Air Hardening
Rod - Drill - A-2 Air Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for A-2 hardening requirements. This category may be available in the new MBA online store at Rod - Drill - A-2 Air Hardening.

There is also a good range of Rod - Drill - A-2 Air Hardening on the Small Parts and Bearings website.


Rod - Drill - O-1 Oil Hardening
Rod - Drill - O-1 Oil Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for O-1 hardening requirements. This category may be available in the new MBA online store at Rod - Drill - O-1 Oil Hardening.

There is also a good range of Rod - Drill - O-1 Oil Hardening on the Small Parts and Bearings website.


Rod - Drill - S-7 Air Hardening
Rod - Drill - S-7 Air Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for S-7 hardening requirements. This category may be available in the new MBA online store at Rod - Drill - S-7 Air Hardening.

There is also a good range of Rod - Drill - S-7 Air Hardening on the Small Parts and Bearings website.


Rod - Drill - Silversteel - W-1 Water Hardening
Rod - Drill - Silversteel - W-1 Water Hardening

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight. Refer engineering guides online for W-1 hardening requirements. This category may be available in the new MBA online store at Rod - Drill - Silversteel - W-1 Water Hardening.

There is also a good range of Rod - Drill - Silversteel - W-1 Water Hardening on the Small Parts and Bearings website.


Shafts - Flexible - Coupling Ends - Open - Mild Steel
Shafts - Flexible - Coupling Ends - Open - Mild Steel

Also see combined categories:
All Coupling End Flexible Shaft

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm. This category may be available in the new MBA online store at Shafts - Flexible - Coupling Ends - Open - Mild Steel.

Related Information:

There is also a good range of Shafts - Flexible - Coupling Ends - Open - Mild Steel on the Small Parts and Bearings website.


Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths for general hobby applications. Not recommended for heavy duty applications. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

There is also a good range of Rod - Round - Soft Metal Packs on the Small Parts and Bearings website.


Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened. This category may be available in the new MBA online store at Shaftloc-tm Sleeves - Single Ended.

Related Information:

There is also a good range of Shaftloc-tm Sleeves - Single Ended on the Small Parts and Bearings website.


Bar - H Section - Brass
Bar - H Section - Brass

Also see combined categories:
All Metal Bar - H Section (300mm Long Only)

Includes K&S Metals range and more

This category may be available in the new MBA online store at Bar - H Section - Brass.

There is also a good range of Bar - H Section - Brass on the Small Parts and Bearings website.


Rectangular Bar - Aluminium
Rectangular Bar - Aluminium

Also see combined categories:
All Rectangular Bar

Thin and thick Aluminum strip and rectangular profiles

Small sizes may not be perfectly straight. This category may be available in the new MBA online store at Rectangular Bar - Aluminium.

There is also a good range of Rectangular Bar - Aluminium on the Small Parts and Bearings website.


Square Bar - Urethane
Square Bar - Urethane

Also see combined categories:
All Non Metallic Bar - Square

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent. This category may be available in the new MBA online store at Square Bar - Urethane.

There is also a good range of Square Bar - Urethane on the Small Parts and Bearings website.


Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

There is also a good range of Rod - Round - Aluminium on the Small Parts and Bearings website.


Rod - Round - Brass
Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

There is also a good range of Rod - Round - Brass on the Small Parts and Bearings website.


Rod - Round - Copper
Rod - Round - Copper

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

There is also a good range of Rod - Round - Copper on the Small Parts and Bearings website.


Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.

Related Information:

There is also a good range of Rod - Round - Stainless Steel on the Small Parts and Bearings website.


Snap Buttons - Double End
Snap Buttons - Double End

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at Snap Buttons - Double End.

There is also a good range of Snap Buttons - Double End on the Small Parts and Bearings website.


Rod - Round - Sintered Bronze
Rod - Round - Sintered Bronze

Also see combined categories:
All Metal Rod - Round

Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.

Related Information:

There is also a good range of Rod - Round - Sintered Bronze on the Small Parts and Bearings website.


Rod - Round - Urethane
Rod - Round - Urethane

Also see combined categories:
All Non Metallic Rod - Round

Hard urethane rubber compound. Machinable.

Length +/- 3.2mm. Diameter +/- 2 percent. This category may be available in the new MBA online store at Rod - Round - Urethane.

Related Information:

There is also a good range of Rod - Round - Urethane on the Small Parts and Bearings website.


Snap Buttons - Single End - Dog Leg
Snap Buttons - Single End - Dog Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at Snap Buttons - Single End - Dog Leg.

There is also a good range of Snap Buttons - Single End - Dog Leg on the Small Parts and Bearings website.


Snap Buttons - Single End - Spring Leg
Snap Buttons - Single End - Spring Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at Snap Buttons - Single End - Spring Leg.

There is also a good range of Snap Buttons - Single End - Spring Leg on the Small Parts and Bearings website.


Threaded Rod - Allthread - Aluminium
Threaded Rod - Allthread - Aluminium

Also see combined categories:
All Threaded Rod

UNC and UNF light weight aluminium. Also known as booker rod.

This category may be available in the new MBA online store at Threaded Rod - Allthread - Aluminium.

There is also a good range of Threaded Rod - Allthread - Aluminium on the Small Parts and Bearings website.


Threaded Rod - Allthread - Brass
Threaded Rod - Allthread - Brass

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC brass. Also known as booker rod.

This category may be available in the new MBA online store at Threaded Rod - Allthread - Brass.

There is also a good range of Threaded Rod - Allthread - Brass on the Small Parts and Bearings website.


Threaded Rod - Allthread - Plastic
Threaded Rod - Allthread - Plastic

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - Nylon and PVC. Also known as booker rod.

Light Weight. Non Corrosive. Vibration Resistant. This category may be available in the new MBA online store at Threaded Rod - Allthread - Plastic.

There is also a good range of Threaded Rod - Allthread - Plastic on the Small Parts and Bearings website.


Threaded Rod - Allthread - Stainless Steel - 304
Threaded Rod - Allthread - Stainless Steel - 304

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - 303 and 304 grades. Also known as booker rod.

This category may be available in the new MBA online store at Threaded Rod - Allthread - Stainless Steel - 304.

There is also a good range of Threaded Rod - Allthread - Stainless Steel - 304 on the Small Parts and Bearings website.





Main Pages

5 Axis Machine Tool Bearings About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Distributor Locations Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Satellite Reaction Wheels Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227578 products in 2182 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Miniature Bearings Australia Pty Ltd (ABN 94 069 113 800)

Miniature Bearings Australia offers 227578 products in 2182 categories including ball bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, couplings, screws, socket cap, dental bearings, magnets, sprockets, timing belts and pulleys, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Miniature Bearings Australia is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Miniature Bearings Australia 1997. All rights reserved.